220V Electric Motor 7.5kw/10HP Rotary 0.8MPa Air Compressor Machine

Model NO.: 10hp/7.5kw
Type: Single Screw Compressor
Drive: Direct Drive and Belt Drive
Start Way: Direct Start and Delta Start
Capacity: 0.8/0.85MPa/M3/Min
Power: 380V/50Hz
Motor Speed: 3400rpm
Weight: 195kg
Airend: Baosi, Hanbell, Rotocomp Ect
Trademark: ZAKF
Transport Package: Wooden Plate
Specification: 800*700*930mm
Origin: China
HS Code: 84143090
Model NO.: 10hp/7.5kw
Type: Single Screw Compressor
Drive: Direct Drive and Belt Drive
Start Way: Direct Start and Delta Start
Capacity: 0.8/0.85MPa/M3/Min
Power: 380V/50Hz
Motor Speed: 3400rpm
Weight: 195kg
Airend: Baosi, Hanbell, Rotocomp Ect
Trademark: ZAKF
Transport Package: Wooden Plate
Specification: 800*700*930mm
Origin: China
HS Code: 84143090
220V Electric Motor 7.5KW/10HP Rotary 0.8Mpa Air Compressor Machine

1. ZAKF,  screw air compressor machine, using 5:6 asymmetric tooth design. The "Line" to "Seal belt" design optimization, is conducive to the formation  of oil film, reduce internal leakage greatly, the efficiency of gas production increased by 5%-10%, the diameter of the rotor. High speed, low noise, ensure that the host is small. long service life, which is recongnized as the most reliable global head, most durable, continuous 24 hours when long-term efficient operation. 

the interests of customers: the perfect combination of technilogy and art, achieve unparalleled reliability and economy.

2. ZAKF machine controller consists of a fully automated computer system as a whole. the key points of each installation with a variety of sensors can be. the measurement of the running state and the all Chinese display on the screen, simple operation, high reliability. It has the function of self checking root, according to the user demand volume, automatic adjustment of running state. 

the interests of customers: monitoring and advanced communication systems make the operation of the compressor is more reliable, higher efficiency and lower maintenance costs, the computer control system to make the machine unload loss minimum, prolong the service life of the compressor.  

MODEL: 7.5KW Direct Air cooling compressor Parameter
Free air deliver(M3/Min/Mpa) 1.2/0.7  1.1/0.8    0.9/1.0   0.8/1.2
Discharge pressure 0.7/0.8/1.0/1.2MPa(a)
Motor power 7.5KW
Motor speed 2935rpm
Voltage/HZ 415V/50HZ
Motor protection grade/insulation grade IP54/F grade
Driving method Direct drving 
Noise level 62dB(A)
Cooling method Air cooling
Lubricant 12L
Outlet air carry lubricant oil <3ppm
Starting method Y-DELTA
Rp1/2"Air outlet pipe diameter Rp3/4"
Temperature of cooled outlet compressed air -5C+-45C
Dimension/weight 800*700*930MM/190KG

220V Electric Motor 7.5kw/10HP Rotary 0.8MPa Air Compressor Machine

220V Electric Motor 7.5kw/10HP Rotary 0.8MPa Air Compressor Machine


Any question or inquiry, please contact us feel free.
220V Electric Motor 7.5kw/10HP Rotary 0.8MPa Air Compressor Machine
  220V Electric Motor 7.5KW/10HP Rotary 0.8Mpa Air Compressor Machine

1. ZAKF,  screw air compressor machine, using 5:6 asymmetric tooth design. The "Line" to "Seal belt" design optimization, is conducive to the formation  of oil film, reduce internal leakage greatly, the efficiency of gas production increased by 5%-10%, the diameter of the rotor. High speed, low noise, ensure that the host is small. long service life, which is recongnized as the most reliable global head, most durable, continuous 24 hours when long-term efficient operation. 

the interests of customers: the perfect combination of technilogy and art, achieve unparalleled reliability and economy.

2. ZAKF machine controller consists of a fully automated computer system as a whole. the key points of each installation with a variety of sensors can be. the measurement of the running state and the all Chinese display on the screen, simple operation, high reliability. It has the function of self checking root, according to the user demand volume, automatic adjustment of running state. 

the interests of customers: monitoring and advanced communication systems make the operation of the compressor is more reliable, higher efficiency and lower maintenance costs, the computer control system to make the machine unload loss minimum, prolong the service life of the compressor.  

MODEL: 7.5KW Direct Air cooling compressor Parameter
Free air deliver(M3/Min/Mpa) 1.2/0.7  1.1/0.8    0.9/1.0   0.8/1.2
Discharge pressure 0.7/0.8/1.0/1.2MPa(a)
Motor power 7.5KW
Motor speed 2935rpm
Voltage/HZ 415V/50HZ
Motor protection grade/insulation grade IP54/F grade
Driving method Direct drving 
Noise level 62dB(A)
Cooling method Air cooling
Lubricant 12L
Outlet air carry lubricant oil <3ppm
Starting method Y-DELTA
Rp1/2"Air outlet pipe diameter Rp3/4"
Temperature of cooled outlet compressed air -5C+-45C
Dimension/weight 800*700*930MM/190KG

220V Electric Motor 7.5kw/10HP Rotary 0.8MPa Air Compressor Machine

220V Electric Motor 7.5kw/10HP Rotary 0.8MPa Air Compressor Machine


Any question or inquiry, please contact us feel free.
220V Electric Motor 7.5kw/10HP Rotary 0.8MPa Air Compressor Machine
 

Excavator cylinder oil seals

â‘ Hardness:

Due to the scientific synthesis of high-molecular polyurethane elastomer materials using iron rubber, the higher the hardness, the higher the modulus, the smaller the elongation, and the better the wear resistance and heat resistance. Well, in the range of minus 35 degrees Celsius to 100 degrees Celsius, and at a pressure of 60 to 70 MPa, the maximum sealing performance can be guaranteed.

Oil seal

â‘¡Pressure resistance:

The use of viscoelastic seals made of nitrile rubber is the most complete protection against damage caused by back pressure. In the range of minus 55 degrees Celsius to 100 degrees Celsius, and under a pressure of 21MPa, due to the rubber The seal is often in a compressed state, so the compression performance of the rubber seal must be considered. It not only achieves enhanced anti-climbing performance and low friction resistance, but also has good performance in dealing with special low-temperature oil, and can also be used in combination with Anti-wear Ring double-purpose retaining ring BRL type.


SPGW

â‘¢Prevention of oil leakage:

Sealing products made of polytetrafluoroethylene and nitrile rubber/PTFErubber; or seals made of nylon resin and nitrile rubber, which can be used in a wide range of applications with large pressure changes and fast sliding speeds According to the working condition, the input hydraulic pressure cutout is designed on the end face of the polytetrafluoroethylene ring to prevent penetration leakage. The maximum working temperature environment is minus 40 degrees Celsius to 160 degrees Celsius; the maximum working pressure is 50MPa.



SPGW piston seal

Material:PTFE+rubber elastomer+reinforced modified nylon
Temperature:Nitrile rubber -40~100℃
Speed:=1.0m/s
Pressure:≤50mpa



SPGW piston seal


SPGO piston seal

Material:PTFE+rubber elastomer
Temperature:Nitrile rubber -40~110℃
Speed:=1.0m/s
Pressure:≤35mpa



SPGO piston seal



SRUV piston rod seal

Material:NBR+thermoplastic polyurethane
Temperature: -35`90℃
Speed:=0.5m/s
Pressure:≤40mpa



SRUV piston rod seal



SRS piston rod seal

Material:PTFE+NBR
Temperature:-40~110℃
Speed:=1.0m/s
Pressure:≤40mpa



SRS piston rod seal



SRCB piston rod buffer seal

Material:Polyurethane+modified polyoxymethylene
Temperature: -35~110℃
Speed:=1.0m/s
Pressure:≤50mpa

SRCB piston rod buffer seal



SRU piston rod seal

Material:Polyurethane
Temperature:-35~100℃
Speed:=1.0m/s
Pressure:≤40mpa

SRU piston rod seal



SRD iron case dust prevention

Material:Polyurethane+metal skeleton material
Temperature:-40~110℃
Speed:=1.0m/s

SRD iron case dust prevention



SRDI soft dustproof

Material:polyurethane
Temperature:-40~110℃
Speed:=1.0m/

SRDI soft dustproof



SDS Dumbbell Seal

Material:polyurethane
Temperature: -35~110℃
Speed:=0.5m/s
Pressure:≤50mpa

SDS Dumbbell Seal


SPG piston combination seal

Temperature:

NBR+Polyurethane + Modified Polyoxymethylene

Temperature:-35`110℃

Speed:=0.3m/s

Pressure:≤70mpa

SPG piston combination seal02



SRNL piston rod seal

Material

NBR+Polyurethane + Modified Polyoxymethylene

Temperature:-35`110℃

Speed:=0.3m/s

Pressure:≤70mpa

SRNL piston rod seal02



SRDF Piston Rod Seal

Material

Polyester rubber

Temperature:-40`100℃

Speed:=1.0m/s

SRDF Piston Rod Seal02



SDY Y-seal

Material:Polyurethane

Temperature:-35~110℃

Speed:=0.5m/s

Pressure:≤70mpa

SDY Y-seal02











KZT anti fouling ring

KZT anti fouling ring



SDS Steffel

SDS Steffel




Piston main oil seal

Piston main oil seal








oil seals,hydraulic oil seal,track link oil seal,TCV oil seal

Safe Seal Technology Co., Ltd. , https://www.jolseals.com