The main body of the CNC punching machine adopts a crank press, and the worktable is a coordinate table which is driven by the stepping motor through the ball screw nut pair, and is used to complete the feeding of the punched sheet material to the stamping operation point.
The loading device is composed of a vacuum chuck and a cylinder for completing the feeding of the sheet to the cutting carriage of the workbench. The waste discharge device is composed of an asynchronous motor and upper and lower rolls, and the mesh waste is discharged by the friction between the upper and lower rolls and the net waste.
When the punching machine is working, the punching action of the punching machine must be synchronized with the feeding action of the workbench. The system is sent to the control system synchronization signal through the photoelectric switch mounted on the crankshaft of the press to ensure that the punching action of the punching machine and the feeding action of the working table are synchronized.
The automatic punching machine works in the stamping workshop, surrounded by other stamping and welding equipment and driving. The action of these large capacity devices creates a strong noise. At the same time, the work of the system itself will generate strong noise. Analysis of various noise sources and their characteristics acting on the system is the basis for suppressing noise interference.
(Finish)
Alumina Ceramic Lined Steel Pipe
Product Description
It is widely used in metallurgy, sintering, mining, cement plant, steel plant, textile factory and other industries. For example, the manufacture of mixer and silo lining board has good wear resistance, non-stick, low impact load, saving energy consumption, protecting silo lining, improving the wear resistance, high temperature resistance and corrosionresistance of mechanical body, protecting parts of equipment system and prolonging the service life of equipment.
Hebei Tongye Metallurgical Science And Technology Co.,Ltd(Former Hebei Province Gucheng County Tongye High wear-risisting material Factory) was founded in 1998 which there are 380 workers and 98 engineering technician in. It's the only one manufacturer in China that produces high wear-risisting material nylon series products.Our production and market share of wear-resisting materials accounted for 70% of the metallurgical industry in China ,is the highest in the domestic industry.
Pe Pipes,Ceramic Lined Steel Pipe,Alumina Ceramic Lined Steel Pipe,Abrasion Resistance Ceramic Lined
Hebei Tongye Metallurgy Technology Co., Ltd. , https://www.hbtyyejin.com