Angle Valves From Cbvac Vacuum

• Using Range: 1X 10-7PA-1X 1.2X10 5PA
• Cycles Until First Service: 200000 Times
• Transport Package: Carton
• Origin: China

• Leak Rate: 1.3X 10-7 PA L/S
• Trademark: cbvac
• Specification: Stainless steel/ Aluminum
• HS Code: 8481804090

                                       Angle Valves From CBVAC vacuum 
 

1.  Brief Introduction

This series valves are applicable to the vacuum line's start and stop of ultra-high vacuum system. They are two different vacuum block valves; these are manual ones and pneumatic ones. They have many advantages, such as stability, durability, great sealing, and long service life and so on, so they are one of initial optional valves in ultra-high vacuum equipment. Manual valves take manual rotating handle as motivity, and helical transmission to make valves start and stop. The direction of start and stop takes marks on the handles as the standard. Pneumatic valves take compressed air as motivity to make valves start and stop. Valve plates will close automatically depending on spring force when losing air source. Applicable medium can be pure air and non-corrosive gas.                               

1. Features

1. Design in a standard and moduling way. Easy to change and maintain.
2. Easy to clean up.
3. Adopt stainless steel bellows and viton O-ring, no lube.
4. The inner of valves' body is welded by stainless steel and the leak rate is low.

1. Order Information

The order numbers of each product are as follows. Customers can search the numbers according to the operation mode of valves and DN.
Order Example:  2089
     High Vacuum Manual Block Straight Valves, DN=16mm, CF flange

1. Major Capacity Targets:

1. Application scope:1×10^-6pa~1.2×10⁵Pa
2. Differential pressure before open valve plates:≤1.2×10⁵a any direction
3. Leak rate of valves' body and base: <1.3×10^-7Pa·L·s^-1
4. Cycling numbers before initial repair:200,000times
5. Baking Temperate of valve bodies:Open≤200ºC;Close≤150ºC
6. Position of installation: Any direction
7. Power supply:AC 220V 50Hz,6W or DC 24V,3W()(Cycles until first service)
8. Compressed air(only supply to pneumatic valves):0.4~0.7MPa
9. )Speed of closing and opening (only supply to pneumatic valves):≤1s
10. Indications of valves' position

-manual valves: with indication of start and stop's positions
- pneumatic valves: with indication of start and stop's positions(magnet switch)

1. Valves' weight: Referring to the above table.

1. External Dimensions

1. Manual

              
 

1. Pneumatic

   
 
CF flange are subject to GB/T 6071-2003
Optional Parts:  Magnet switch.
 
Other Relative Vacuum Valves 


Packaging & Delivery

Packaging Details:    Inner: plastic bag. Outer: carton or wooden case or according to customers' need.
Delivery Detail:    Shipped in 3 days after payment

Our company introduction 

Chuanbei Vacuum Technology (Beijing) Co., Ltd.(Registered Brand CBVAC), founded in 2002, is national new-high technology enterprise, the Chinese Vacuum Association key enterprise specialized in vacuum products development, design, production, sales and service. We took the major projects task from MOST, the intelligent digital workshop from NDRC, technology upgrading from MIIT and so on.
 CBVAC posses various series of vacuum valves, vacuum pumps, vacuum bellows, vacuum flange connectors and customized chamber processing, vacuum system integration and other vacuum products. The industry belongs to high-end equipment manufacturing industry. The vacuum products and technologies are widely applied in new energy, new materials, aerospace, semiconductor, IC equipment and other fields, also we design and manufacture products in the vacuum technology application fields from universities and scientific research institutions.

Our product Range :






 

Double Head Chamfering Machine

1. Designed both inside and outside of the tube and rod end, chamfering and face milling can be done once a uniform, rapid and accurate.
2. This Pipe Chamfering Machine has semi-automatic Type: artificial feed, automatic cutter speed of advance and retreat quickly, to replace parts of different sizes just to make a simple adjustment.
3. Double head chamfering: cam synchronized feed, processing, high stability, can be done simultaneously on both sides, interior angle, exterior angle and the milling face at one time, can achieve a multiple increase in output.
4. Gear chamfering machine can be appled to the material: stainless steel, iron, copper, aluminum tubing and bar.

Double Head Chamfering Machine,Cnc Gear Chamfering Machine,Double Side Chamfering Machine,Semi Automatic Double Chamfering Machine

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutter.com