Buy or not buy? Keep in mind the three factors to rest assured that the purchase of discontinued used cars

With the acceleration of the frequency of replacement of new cars, there are more and more production models in the used car market. Should these stop cars be bought? Small i randomly interviewed 10 consumers in the used car market, and 7 people clearly stated that: Of course, they should not buy, and 2 of them said that they did not buy because of fear of losing face; 3 consumers said that as long as there is local maintenance Will buy, after all, cheap ~ Well, stop production car can buy it? The first car network i immediately puzzled you.

The replacement frequency of most vehicle models is usually 4 to 6 years, including the overall model, interior style, traditional system, new assembly configuration, and updated engine transmission. It should be noted that this update is for the chassis structure and body. There will be no major adjustments to the architecture. In 2~3 years, a mid-term remodeling of the model will be carried out, such as adjusting the front face style, tail design, interior design, etc., but it will not change the overall shape, and the chassis and transmission system will not change much, and the year will be small. Changes are almost every year. The actual big replacement is generally in 8 to 10 years, this may completely change the suspension form, chassis calibration and so on. Of course, there are still some mainstream models that will undergo big changes in one or two years.

Each new generation of vehicles will bring a series of production suspension models to the used-car market. The reason why consumers do not buy is that there is a fear that stopping production vehicles will affect future maintenance and repairs. Actually, the discontinuation of used cars is not necessarily unacceptable, but mainly depends on the market's inventory, word-of-mouth, audience, and other factors. If these are all stable, the price of models is even more than half that of the cars they are producing. It is still worth buying.

Want to buy a discontinued used car need to pay attention to the following points:
1, the market holdings Ordinary consumers in the election of the car, often very concerned about the brand, price, fuel consumption and engine models and so on. For the expert, these are important, but they will pay more attention to the vehicle market. For example, the price of the A model is 10,000 yuan less than that of the B model, but when the model is changed after three years, the A model is 20,000 yuan less than the B model. Undoubtedly, buying a B model is a wise choice. Xiaoi reminded that some models that have undergone significant changes during replacement are not easy to retain value, which will lead to very high prices in the used car market. When purchasing, consumers who want to change hands in the future should pay special attention to this. point.
2. Maintenance Costs Some of the large-capacity production vehicles are very easy to buy spare parts on the market, and the cost of conservation is naturally not high. Such as: Volkswagen series models, due to the large market holdings, maintenance points, or more ideal. However, some cars have been suspended for too long and the accessories are not good to buy. Even if the prices are higher, small i recommend that you do not buy them. Otherwise, you will get a discount on the car prices, but you will have to lose money in repairs.
3, look at word of mouth reputation is experienced after practice in the third point of view to spread, relatively more convincing. Well-known models often have high brand recognition and stable performance, which provides a strong guarantee for the improvement of their residual value. Some vehicles may have a low market retention rate and have a longer production stoppage time, but its reputation is very good, and there are few breakdowns. Such a production stop vehicle can be considered as a starting point.

New Type

Product Description

Production structure have 3 series: Solid fin(big fin) with slant insert tube , single fin(Small fin) with parallel tube expansion and single fin with slant insert tube
Material Composition:
Aluminum Tube OD:: Î¦8mm Wall Thickness: 0.508~1.0mm
Aluminum foil thickness: 0.13-0.2mm
Process: Fin stamping and tube bendingâ†’tube end press and twistâ†’fins and tube assemblyâ†’ leakage testâ†’keeping pressureâ†’packing

Raw material	(1)Al tube:OD 8mm, wall thickness:0.508-1.0mm
Raw material	(2)Al foil thickness: 0.13-0.2mm
Application	refrigeration parts
Structure	(1)pull and expanded type
	(2)slant inserting type
Key process	Fin stamping and tube bendingâ†’tube end press and twistâ†’fins and tube assemblyâ†’ leakage testâ†’keeping pressureâ†’packing

The structure have the Al tube expation and Al tube insert with small fin and big fin
Specially refrigeration Al tube and Al. foil fin, pure surface, light weight.
High quality inner clearance, high capability of heat-exchange.
High performance corrosion resistant.
Apply to the refrigeration R134a, R600a.
Production surface can be painted with blue or black painting

Solid Fin Evaporator:

Small fin with tube expansion
Small fin with slant insert tube
Fin evaporator moudle with heater

Aluminum Tube Aluminum Fin Copper Tube

Our company mainly produces products for:Fin Evaporator.Fin Type Condenser.Capillary Tube.Aluminum Coolant Reservoir.Plate Reinforcement Parts.Stamped Parts.Aluminum Tube.Instrument Testing Equipment.

If you have any interest, pls feel free to contact with us at any time. We can supply copper evaporator and copper condensers according to your drawings or samples.

Aluminum Tube Aluminum Fin Copper Tube

Changjing

new type

Xinxiang Yukun Refrigeration Technology Co.Ltd , https://www.yukunevaporator.com