Main Features:
1, Equipment structure types: Machinery stationary, workpiece automatic through;
2, Applicable workpiece specifications: Web height: 200-2000MM;
Flange width: 200-800MM; Length: 4000-15000MM;
3, Clamping way: Web and flange automatic clamping;
4, Hydraulic system: With the pressure keep and time delay;
5, Main drive control: AC motor + cycloidal reducer;
6, Adopt imported technology of frequency converter to AC frequency convertor centralizes and locates the web and flange, and realize automatic working;
7, CO2 gas shield welding or manual welding is optional for user.
The positioning of web and flange is realized with hydraulic drive, on the two sides, the mechanical clamping and centralizing is acted synchronously, to ensure web and flange positioning with various sizes within allowed range.
The automatic centralizing is accurate and needless to adjust each time(no center deviation wheel for minor adjustment). When assembling, there is automatic hydraulic holding frame which can go up and down, to make sure web and flange are in matched position. The upper beam has 4pairs of guide on the left and right to make sure stabilization.
The automatic welding system is driven by light cylinder without compressed air source. The inlet and outlet table roller and inlet tension rod are sectional type, and can add and remove according to customer need.
Supply scope:
1, The main structure: Main frame, upper gate frame, synchronous clamping and centralizing system of web and flange, main transmission motor reducer.
2, Inlet table roller system: Active and passive table roller: 2.6m*3sets, tension rod: 3 sets.
3, Outlet table roller system: Active and passive table roller: 2.6m*3sets.
4, Hydraulic system: Oil bump station, high pressure rubber pipe, and hydraulic cylinder.
5, Electric control system: Electric cabinet, AC frequency converter and etc.
Warranty and after-service:
1. The seller will send workers to the working site of the buyer for engaging in and instructing the installation and test, until the equipment is ready for use. We also train the equipment operator and maintenance staff for user.
2. Equipment guarantee period is one year. During this period, for the breakdown not caused by mis-operation by user, we will be responsible for repair and replace.
3. After the guarantee period, our companies will provide maintenance service and spare parts at low cost.
Here we make a promise to you all: We will offer you the products with the ideal price and good quality.
If you have any problems or you are interested in our products, Please contact me via Email or following ways: Tel: 0086-15061825918
| Model | Z15 | Z18 | Z20 |
| web height mm | 200-1500 | 200-1800 | 200-2000 |
| web thickness mm | 6-32 | ||
| web length mm | 4000-15000 | ||
| flange width mm | 200-800 | ||
| flange thickness mm | 6-40 | ||
| assembly speed mm/min | 500-6000 | ||
| feeding table roller mm | 2600×2 | ||
| output table roller mm | 2600×2 | ||
| centralized way | hydraulic link mechanism clamp, centralize and weld in the middle automaticly | ||
| speed control | imported AC frequency adjustor stepless adjust | ||
| input volumn | 16KVA exclude wellding power | ||
| welding system | 2 sets of CO2 protecting welding machine | ||
Hydraulic press (aka: hydraulic press) Hydraulic press is a machine that uses liquid static pressure to process metal, plastic, rubber, wood, powder and other products. It is commonly used in pressing processes and press forming processes such as forging, stamping, cold extrusion, straightening, bending, flanging, sheet drawing, powder metallurgy, press fitting, and the like.
Its principle is that there are many kinds of machines made by using Pascal's law to use liquid pressure transmission. Of course, the use is also root.
According to needs, it is diverse. For example, according to the type of liquid that transmits pressure, there are two types of hydraulic presses and hydraulic presses.
The hydraulic press produces a large total pressure and is often used for forging and stamping. Forging hydraulic presses are divided into die forging hydraulic presses and free forging hydraulic presses. The die Forging Hydraulic Press uses a mold, while the free forging hydraulic press does not use a mold. The first 10,000-ton hydraulic press manufactured in China is a free forging hydraulic press.
Car Door Bending Hydraulic Press
Car Door Bending Hydraulic Press,Car Door Bending Hydraulic Press Machine,Car Body Hydraulic Press Machine,Car Body Bending Hydraulic Press
CHENGDU ZHENGXI HYDRAULIC EQUIPMENT MANUFACTURING CO., LTD. , http://www.zxhydraulic.com