Â
        Cobalt chrome steel laser marking machine/steel laser marker
1, Machine main Features:
Suntop laser develop and produce complete air cooling Fiber Optical Laser marking system in China. out laser marking machine with the characteristics of environmental friendly, low consumption, fully automatically and leading laser system.
This creative laser system make the optical conversion rate up to 38%-50%, so only air cooling can meet the system requirements, this laser system is Small and compact size, Fiber output, can apply flexibly, and easy to make 3D processing system.
Our fiber laser marking machine Installed the backward reflecting isolator, which uses the particularity of wavelength and direction of laser, and the special structure inside the backward reflecting isolator, to block the laser reflected by work piece, in order to avoid the laser enter the laser oscillator again to damage the laser oscillator.Â
Rapid cache transmission control and selective elements greatly ensure long-time work continuously, to ensure the Production capability Control of ± 0.1C° High precision, perfect control board and optimal controlling system design carefully ensure the processing production rate. Quick speed, High impulse power, little electricity consumption, Low operation cost, No consumables.
We can customized different kinds of laser marking system depend on customer's actual requirements.
2, The machine applications & Materials:
The fiber optic laser marker has advantage of high beam quality and high reliability. It is suitable for processing fields that need high marking depth, smoothness and accuracy. It is widely used in: Electronic components industry, medical device industry, glasses watch and clock industry, IC card industry, plastic tool industry, kitchen and bathroom appliance etc...
some main materials type as follows:
17-4 PH stainless steel | Magnesium |
303 stainless | Metal-plated ceramics |
4043 steel | Molybdenum |
6061 Aluminum | Nickel plated 1215 mild steel |
ABS (white/black) | Nickel plated brass |
Aluminum, 6061 | Nickel plated gold |
Aluminum, yellow chromate | Nickel plated Kovar |
Bayer 2807 Makrolon polycarbonate | Nickel plated steel |
Bayers bayblend FR110 | Nylon |
Black/white ABS | PEEK, white |
Brass | Polybutylene Terephthalate |
Black/white polycarbonate | Polycarbonate (black/white) |
Brushed aluminum | Polycarbonate resin 121-R, GE Plastics |
Carbon fiber | Polycarbonate, Bayer 2807 Makrolon |
Carbon nanotube | Polysulphone |
Ceramics, metal-plated | Rynite PET |
Clear coat anodized aluminum | Santoprene |
Cobalt chrome steel | Silicon carbide |
Colored delrin (black/brown) | Silicon steel |
Compacted powder iron with phosphate coating | Silicon wafers |
Copper | Stainless steel 303 |
DAP - Diallyl Phthalate | Stainless steel 17-4 PH |
Delrin, colored (black/brown) | Steel 4043 |
GE Plastics polycarbonate resin 121-R | Steel, machine tool |
Glass filled PEEK | Various inconel metals (nickel-chromium super alloys) |
Glass filed Teflon | White PEEK |
Hard coat anodized aluminum | Yellow chromate aluminum |
Inconel metals (various) | Zinc plated mild steel |
Machine tool steel | And Many More! |
3, Â Our fiber laser marking machine main parameters:
Model | ST-FL10 series | ST-FL20 series | ST-FL30 series | ST-FL50 series |
Laser power | 10W | 20W | 30W | 50W |
Length of laser weave | 1064nm | 1064nm | 1064nm | 1064nm |
Marking scope | 110x110~200x200mm | 110x110~250x250mm | 110x110~250x250mm | 110x110~ 300x300mm |
Mark depth | 0.3mm | 0.4mm | 0.6mm | 1.0mm |
Marker speed | ≤15000mm/s | ≤15000mm/s | ≤15000mm/s | ≤15000mm/s |
Min line width | 0.05mm | 0.05mm | 0.05mm | 0.05mm |
min character | 0.15 mm | 0.15 mm | 0.15 mm | 0.15 mm |
Repeat precision | ±0.002mm | ±0.002mm | ±0.002mm | ±0.002mm |
Gross power | 0.4KW | 0.5KW | 0.6KW | 1KW |
Power supply | 220V(±10%)/50Hz/ 3A | 220V(±10%)/50Hz/ 3A | 220V(±10%)/50Hz/ 3A | 220V(±10%)/50Hz/ 3A |
Operating temperature | 10-35°C | 10-35°C | 10-35°C | 10-35°C |
Remark: the laser power 10W and 20W mainly for marking and engraving, the laser power 30W and 50W can do the laser cutting and deep laser engraving on materials.
4, Laser marking samples of this machine as follows for reference:
Â
                                      Â
        Cobalt chrome steel laser marking machine/steel laser marker
1, Machine main Features:
Suntop laser develop and produce complete air cooling Fiber Optical Laser marking system in China. out laser marking machine with the characteristics of environmental friendly, low consumption, fully automatically and leading laser system.
This creative laser system make the optical conversion rate up to 38%-50%, so only air cooling can meet the system requirements, this laser system is Small and compact size, Fiber output, can apply flexibly, and easy to make 3D processing system.
Our fiber laser marking machine Installed the backward reflecting isolator, which uses the particularity of wavelength and direction of laser, and the special structure inside the backward reflecting isolator, to block the laser reflected by work piece, in order to avoid the laser enter the laser oscillator again to damage the laser oscillator.Â
Rapid cache transmission control and selective elements greatly ensure long-time work continuously, to ensure the Production capability Control of ± 0.1C° High precision, perfect control board and optimal controlling system design carefully ensure the processing production rate. Quick speed, High impulse power, little electricity consumption, Low operation cost, No consumables.
We can customized different kinds of laser marking system depend on customer's actual requirements.
2, The machine applications & Materials:
The fiber optic laser marker has advantage of high beam quality and high reliability. It is suitable for processing fields that need high marking depth, smoothness and accuracy. It is widely used in: Electronic components industry, medical device industry, glasses watch and clock industry, IC card industry, plastic tool industry, kitchen and bathroom appliance etc...
some main materials type as follows:
17-4 PH stainless steel | Magnesium |
303 stainless | Metal-plated ceramics |
4043 steel | Molybdenum |
6061 Aluminum | Nickel plated 1215 mild steel |
ABS (white/black) | Nickel plated brass |
Aluminum, 6061 | Nickel plated gold |
Aluminum, yellow chromate | Nickel plated Kovar |
Bayer 2807 Makrolon polycarbonate | Nickel plated steel |
Bayers bayblend FR110 | Nylon |
Black/white ABS | PEEK, white |
Brass | Polybutylene Terephthalate |
Black/white polycarbonate | Polycarbonate (black/white) |
Brushed aluminum | Polycarbonate resin 121-R, GE Plastics |
Carbon fiber | Polycarbonate, Bayer 2807 Makrolon |
Carbon nanotube | Polysulphone |
Ceramics, metal-plated | Rynite PET |
Clear coat anodized aluminum | Santoprene |
Cobalt chrome steel | Silicon carbide |
Colored delrin (black/brown) | Silicon steel |
Compacted powder iron with phosphate coating | Silicon wafers |
Copper | Stainless steel 303 |
DAP - Diallyl Phthalate | Stainless steel 17-4 PH |
Delrin, colored (black/brown) | Steel 4043 |
GE Plastics polycarbonate resin 121-R | Steel, machine tool |
Glass filled PEEK | Various inconel metals (nickel-chromium super alloys) |
Glass filed Teflon | White PEEK |
Hard coat anodized aluminum | Yellow chromate aluminum |
Inconel metals (various) | Zinc plated mild steel |
Machine tool steel | And Many More! |
3, Â Our fiber laser marking machine main parameters:
Model | ST-FL10 series | ST-FL20 series | ST-FL30 series | ST-FL50 series |
Laser power | 10W | 20W | 30W | 50W |
Length of laser weave | 1064nm | 1064nm | 1064nm | 1064nm |
Marking scope | 110x110~200x200mm | 110x110~250x250mm | 110x110~250x250mm | 110x110~ 300x300mm |
Mark depth | 0.3mm | 0.4mm | 0.6mm | 1.0mm |
Marker speed | ≤15000mm/s | ≤15000mm/s | ≤15000mm/s | ≤15000mm/s |
Min line width | 0.05mm | 0.05mm | 0.05mm | 0.05mm |
min character | 0.15 mm | 0.15 mm | 0.15 mm | 0.15 mm |
Repeat precision | ±0.002mm | ±0.002mm | ±0.002mm | ±0.002mm |
Gross power | 0.4KW | 0.5KW | 0.6KW | 1KW |
Power supply | 220V(±10%)/50Hz/ 3A | 220V(±10%)/50Hz/ 3A | 220V(±10%)/50Hz/ 3A | 220V(±10%)/50Hz/ 3A |
Operating temperature | 10-35°C | 10-35°C | 10-35°C | 10-35°C |
Remark: the laser power 10W and 20W mainly for marking and engraving, the laser power 30W and 50W can do the laser cutting and deep laser engraving on materials.
4, Laser marking samples of this machine as follows for reference:
Â
Cnc Bending is a process where sheet metal is bent to an angle using, typically a V shaped punch and die. The sheet is placed between the punch and die which presses down on the sheet. This method of bending provides a low cost method to product 3D shapes from 2D sheets. CNC Bending is a suitable for processing most ductile metals and primarily for sheet metal designs with one or more bends. Just a few examples of are brackets, enclosures, cams, chassis, etc. There is generally no special tooling required, with the exception of intricate designs and special bends.
CNC Bending
Cnc Bending,Cnc Bending Machine,Cnc Pipe Bender,Cnc Wire Bender
Chongqing Jin Te Rui Machine Co.,Ltd , https://www.die-casting-machine.com