CZJ-B vibration protection instrument CZJ-B2, CZJ-B3
It is composed of standard chassis 160×80 (mm). Each monitor has two channels A and B, and independent LED display mode. Independent 4 to 20 mA output, independent switching output.
For a rotating machine to measure its comprehensive mechanical situation, the vibration amplitude of the rotor is a basic indicator of Zui.
The dual-channel bearing vibration monitoring protector comes from a separate SG-2 speed sensing signal, or a CWY-DO type eddy current sensing signal, which continuously displays the amplitude value of the channel on the LED digital display. In order to be fully protected, two sensors with an angle of 90° need to be installed on one bearing. Vertical or horizontal installation is required. If the user needs, the factory can provide a protective box with glass door on the outside, the dimensions of the product: length 258 wide 158 deep 460; SG-2 sensor fixing screws or mounting base can be provided, the base size is 40×40mm, can be installed vertical and 2 sensors in the horizontal direction.
Second, technical indicators
It is an intelligent instrument that cooperates with the SZ-6 series magnetoelectric speed sensor to continuously monitor and measure the amplitude and intensity of the absolute vibration of the bearings of various rotating machinery.
It is available in both disc and wall styles.
The main function
With linear trimming. With power-on and power-down protection.
The historical peak and historical alarm status after the alarm is automatically saved.
Set parameters and measurement history parameters can be saved for a long time after power failure.
Technical Parameters
Input signal: SZ series magnetoelectric speed sensor;
Frequency response range: vibrating table 10~200Hz; intensity meter 10~100Hz;
Display mode: 3-digit LED digital display, accuracy: ±1.0%;
Measuring range: 0~500μm (peak-to-peak amplitude value); 0~30.0mm/s (vibration intensity);
CZJ-B vibration protection instrument CZJ-B2, CZJ-B3
SDJ-3L-S2 vibration intensity monitor
Current output: linear output of 4~20 mA corresponding to the range;
Accuracy: ±1.0% of full scale; Zui large load: 500Ω;
Buffered output: sensor raw signal output (TDM signal);
Alarm setting: 2 points per channel upper limit, and arbitrarily set within the full scale range;
Alarm output: LED indicator, relay switch output, capacity AC250V
/2A, DC28V /2A;
Use power: 220VAC ± 10%, 50Hz ± 5%; power consumption <10W;
Operating environment: temperature 0~50 °C; storage temperature -40~60 °C; relative humidity
20~90% (non-condensing);
No corrosive or strong magnetic field around;
Dimensions: panel mounted table: width 160 × height 80 × depth 225 (mm3);
Opening size: width 152 × height 76 (mm2);
Wall table: width 190 × height 290 × thickness 92 (mm3);
Installation size: bottom 170 × height 272 (mm2). (Equilateral triangle
SDJ-3L-S2 vibration intensity monitor
◠Output: constant current: 4 ~ 20mA (load <1KΩ)
â— Constant voltage: 1~5V or oscillometric analysis output â— Alarm setting: Any setting within 0~200um â— Switching output: DC27V/1A or AC220V/2A
◠Noise level: ≤1% (full scale value) when no signal is input
◠Operating environment: temperature -25 ~ 45 ° C
Relative humidity ≤80%
◠Power supply voltage: AC 220V ± 10% / 50Hz
The SDJ-3 vibration monitor is a common type of vibration meter.
SDJ-3B vibration monitoring and protection instrument is a safe and reliable instrument.
HN-2 intelligent vibration monitor is used for long-term monitoring of vibration intensity and displacement of rotating machinery with speed of 600~60000/min. It is matched with magneto-electric vibration speed sensor to monitor vertical and horizontal vibration and vibration of rotating machinery. The value is displayed by the front panel of the instrument, and has a standard analog current output. It can be mated with various DCS and PLC systems. When the vibration value exceeds the limit, the instrument can be connected with an external sound and light alarm to prompt the field operator to take preventive measures. And there are two levels of alarm switch output to protect the machine safe and reliable operation.
Function description realizes intelligent processing: alarm I value, II value can be adjusted by the panel button panel button, no potentiometer adjustment, convenient on-site debugging for one minute without pressing the operation button, can return to the running state alarm delay adjustment range 1~60 seconds, to prevent accidental alarm caused by on-site interference, with upper and lower power detection function, sensor drop detection function, cut off alarm and stop output circuit at the same time, can effectively suppress instrument false alarm JM-B-3Z-01-01- 200 fan vibration monitoring protects the measuring instrument vibration intensity (vibration intensity) and vibration displacement (vibration amplitude) manually switched.
Technical index frequency range: 10~1000Hz
Range: 0~20.0mm/s or 0-200um (adjustable)
Accuracy: ±1% (full scale)
Current output: 4~20mA
Switching output: DC 30V / 5A or AC250V/5A (normally open)
Alarm setting: arbitrarily set ambient temperature in full scale: running time: 0~65°C
When storing: -30~80°C
Relative humidity: up to 95%, non-condensing power supply voltage: 220VAC/50Hz ± 10% 50mA
Dimensions: 160 × 80 × 250mm
Opening size: 152+1×74+1mm
â— Measurement range: Frequency: 10 ~ 300Hz
â— Amplitude: 0~200um (peak to peak)
(The range can be customized by the user)
◠Accuracy: ≤±0.5% (full scale value)
◠Frequency response: 40~60Hz≤±1%
30～200Hz≤±2%
10～300Hz≤±3%
JM-B-3Z-01-01-200 fan vibration monitoring and protection measuring instrument
Technical Parameters
1. Display mode: LED digital display, LCD liquid crystal display (optional)
2. Range: Frequency response: 1 ~ 3KHz (axis vibration) / 10 ~ 300Hz (watt vibration)
Amplitude: arbitrarily set within 0 to 500 μm (peak-to-peak); Factory default: 0 to 200 μm
Intensity: Any setting within 0~50.0mm/s (effective value); Factory default: 0~20.0mm/s
3. Measurement accuracy: ±0.5, linear error ≤1%FS
4. Input signal: Signal of the ZHJ-2 vibration speed sensor,
CWY-DO-Φ8mm eddy current sensor,
ZHJ-3D low frequency vibration sensor signal
5. Output signal: Current output: 4 ~ 20mA (load ≤ 1KΩ)
Secondary switching output: DC 27V/2A or AC250V/5A
6. Ambient temperature: -10～65°C (relative humidity: ≤85%)
7. Supply voltage: AC220V/50Hz±10%
8. Installation method: disc type
9. Dimensions: Regular style: 170mm (length) × 95mm (height) × 260mm (deep)
Vertical: 95mm (length) × 170mm (height) × 260mm (deep)
10. Opening size: regular style: 152mm (length) × 77mm (height)
Vertical: 77mm (length) × 152mm (height)
Front panel function
Channel I display box: in the running state, the channel I vibration value is displayed; in the parameter setting state, the parameter flag is displayed;
Channel II display box: in the running state, the channel II vibration value is displayed; in the parameter setting state, the parameter value corresponding to the parameter flag is displayed;
Alarm indicator: When the measured value exceeds the alarm setting range, the alarm indicator lights up;
Set button: Press and hold the button for 5 seconds to enter the parameter setting state; in the parameter setting state, press this button to enter the parameter editing state. After editing the parameters, press this button to confirm the modified parameters. After setting the parameters, press and hold for another 5 seconds to return to the working state and save the set parameters.
â–² key: In the parameter view state, press this key to view the next parameter; in the parameter editing state, you can add 1 to the parameter to be edited, the number range is 0~9;
(â†) Cursor left shift key: In the parameter editing state, move the number of parameter digits to be set, such as from single digit to hundred digits;
Confirmation key: Press the Enter key to confirm the edit. After setting the parameters, press the Enter key to confirm and proceed to the next parameter setting selection.
Parameter setting and operation The instrument has been debugged before leaving the factory, and can be used directly by the user. If you need to check the factory parameters of the instrument or modify it, you can perform the following operations.
After power-on, the meter is in operation and the panel displays the speed of each channel.
The various parameters of the instrument are set by the panel's “Setting, â–², â†, OKâ€. Each parameter has a corresponding flag representation. The order and steps are as follows:
Parameter flag
Parameter Description
Setting range
EE1?
Channel I Alarm I
0~999
PP1?
Channel I Alarm II
0~999
LL1?
Channel I range
0~999
EE2?
Channel II Alarm I
0~999
PP2?
Channel II Alarm II
0~999
LL2?
Channel II range
0~999
EE-
Alarm delay (default 1 second)
0~60
Note: In the parameter setting mode, the parameter flag is displayed in the channel I display box, and the corresponding parameter value is displayed in the channel II display box.
Press the “Set†button for about 5 seconds to enter the parameter setting mode. “EE1?†is displayed in the panel channel I display box, and the factory channel I alarm I value “06.0†is displayed in the channel II display box. Press “OK†to enter the parameter editing mode. At this time, the low digit flashes. Use the “▲†key to add 1 to the digit. The range is 0-9. Press “â†â€ to flash the previous digit. Use the “▲†button to modify this digit; and so on, press the “â†â€ button to select the number to be modified, and then use the “▲†button to modify the digit. Press the “Confirm†button to edit the parameter. carry out. Press the “▲†key to continue setting the next parameter. Or press and hold the "Settings" button to return to normal working condition. When changing the delay, select HHP, change 001 to 004, confirm the next menu, find EE-, and modify the default value.
Terminal board wiring diagram and sensor installation
Debugging instructions
The instrument has been verified before leaving the factory and can be used directly by the user.
The installation mode monitor is installed in the centralized control room. When installing, the monitor is inserted from the front of the centralized control room, and then the left and right mounting brackets are provided from the rear (provided by the manufacturer), and the screws can be tightened. Then connect the input and output lines to the rear terminal block of the monitor as required.
Vibration probe CZJ-B2/B3/B4/B3G/B4G vibration monitor
8000/B/C/E series combined monitoring and protection device, RDZW series axial displacement monitor, RDCZ series differential expansion monitor, RDXZ series shaft vibration monitor, CZJ-B series vibration monitor, CZJ-4D type four channel Vibration monitor
SZC-04 series intelligent tachometer, SZC-04F series intelligent speed counter tachometer, DZC-02A tachometer SDJ-3, 3B, SDJ-3B/G vibration monitor
HZD-8500/C/D turbine monitoring and protection device, HZD-RSDC type overspeed protection device, 8500B rotating machinery monitoring and protection system, HZW type axial displacement monitor, HZW-Z type intelligent differential expansion monitor, HZS-04N type intelligent Tachometer
VS-068/VS-069/VS-077/VS-079/VS-080/VS-168/VS-169/VS-177/VS-277/VS-288/VS-289/Watt vibration speed sensor
PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70 electric absolute vibration tile sensor
PR6418 relative displacement sensor PR9350 inductive displacement sensor PR9376 speed sensor PR9270 acceleration sensor
TM0782A-K/TM0783A/TM0793V-K/TM079VD Watt Vibration Sensor PT079VD Low Frequency Magnetoelectric Speed ​​Displacement Sensor
SDJ-3, 3B, SDJ-3B/G vibration monitor
SD-051/IN-081/IN-083/IN-084/IN-085/INA-081/INA-083/INA-085/DS-1051/DS-1052/DS-1053/DS-1054/SD- 052/SD-053/SD-054/SD-081/SD-083/SD-084/SD-087/SD-088/SD-089/SDH-151/SDH-154/SD-161/
SD-164/WT-010/WT-025 eddy current axis displacement sensor shaft vibration probe vibration probe CZJ-B2/B3/B4/B3G/B4G vibration monitor dual channel bearing vibration monitoring protection instrument
OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165 eddy current axis displacement sensor shaft vibration Probe front end
EC-001/EC-002/EC-003 eddy current axis displacement sensor shaft vibration probe extension cable
PR6422/PR6423/PR6424/PR6425/PR6426 eddy current axis displacement sensor shaft vibration probe CON011/91,
Technical parameter sensitivity 20～50mv/mm/s±1% (according to user adjustment) Frequency response (optional) 5～100hz, 10～500hz, 10～1000hz natural frequency about 10hz amplitude limit 2mm (peak-peak) Zui large acceleration 10g installation method vertical; horizontal; vertical, horizontal dual-use temperature range -30 ° C ~ 120 ° C relative humidity to 95% non-condensing Dimensions φ 35 × 78mm weight about 350g installation J2 / ZJ2-A / bearing vibration monitoring protection device
8500/85100XY/85564/85200/85850BCD-21A/VIBROCONTROL110/ EN900/EN2000A1/Vibration Monitoring Instrument
ZXP-F3200/ZXP-J116/ZXP-J200/ZXP-J210/ZXP—J220/DZX-400/PDM1201/WLI-
2004/WLI-2003/WLI-2001/S2662/Double channel bearing vibration monitoring and protection device
VRS2000A11/
WLI-2011/PT2010/11 dual channel bearing vibration monitor
ZXP-J400/ZXP—J510/ZXP—J520/XD-2/XZK-1/OD-9008S/Double-channel tile cover vibration measuring instrument
OD9004/S2162/S2112/VB-Z420/VB-Z430/VRS2000A11/VRS2000A1 vibration monitor
VRS2000A3/VRS2000A4ST-101/EMT226/VIB-10b/VIB-5/ZDY/PT908/SJ-2011 bearing vibration monitoring instrument
SJ-2012/SJ-2031/SJ-2021/SJ-2022/SJ-2051/SJ-2052 vibration detection and protection device
TR81/DWQZ/TRIN/7200/3300/PR6422/PR6423/PR6424/PR6425/PR6426/Electro-Vortex Displacement Sensor
SD081082/85811/TM0180/TM0105/TM0182/WINW/QH8500/SE/CWY-DO/Axial Displacement Sensor
KY8500/OD9000/9000XL/S2100/S2200/VB-Z9100/MLW3300/
WD220 non-contact displacement sensor
RDZW-2Na/CZQZ/RDZW-2/RDZW-2N/WB-8501C/8521C/8531C/85300-DW/Axial Displacement Monitoring and Protection Device
85350/85710/EN2000A2/HY-01/TPM/DTPM/OD9006/S2102/ VRS2000A2/Axial Displacement Detection Monitor
RDZW-2Na/CZQX/RDCZ/RDCZ-2/85710/
HY-02/DEM/DDEM/ S2161A/
VRS2000A5/Expansion monitoring and protection device
SZCB-01/PR9376/SM-10/12/14/16/T-03/SZMB-5/9/SZMB-01 Reluctance Speed ​​Sensor
SMCB-01/S16/SMS-12/16/E12-E12S-E58A-E58S/D12-D12P/F12A-F12S-F58A-F58S/
Y12AD/DSD/DSF/DSE/DSH magnetic sensitive speed sensor
HK-16/CM16/S16/HB2032/SC12-20K/GVS Gear Speed ​​Sensor
DZC-02/DZC-02A tachometer
DM504/HY-ZS3/WZ-7A anti-rotation speed monitoring and protection table
HY-ZS3F anti-speed sensor
SZC-04/SZC-04B/85700/85790/JMS/HY-01/XSM intelligent tachometer monitoring and protection device
XJP-10B/02A/42A/XSV-01/SQY01T/MFT/SQY11-04/RAS/SKY/SZC/SQYC/CS-1/
SQY01/QYDPM/SQY08TD intelligent speed digital display
AI-TEK (AIRPAX)/Tach-pak1Tach-pak3Tachtrol2Tachtrol3/MV-VI intelligent speed monitor
WZ-3C/WZ-1D/WZ-6A/AI-TEK(AIRPAX)/EN2000A3SZC-04/SZC-04B/Intelligent Speed ​​Measuring Instrument
HY-ZS1/HY-ZS2A/HY-BT1/HY-ZS2/HY-ZS3/HY-CS1/OD9001/S2183/S2181/Smart Tachometer
VB-Z410/VB-Z440/VB-Z470/ VRS2000A7/ XHF-201/WB-8581 intelligent speedometer
DF9032 thermal expansion monitor
3500/3300/7200/PT2060/PT2010/RMS700/MMS3000/MMS6000/VB4000/TN8000/WI
N2000/VM600/EN8000/EN9000/MV2000/MV3000/S8100/8500/9000/ZXP—JK6600/S32000/
S36000/8000B series rotating machinery monitoring and protection device
TR2001/TR2011/TR2031/TR2061/TR2081/TRZF/TR95 transmitter
DTM/TM101/TM201/TM301/SLM/WINV/EN2000A4/EN2000A5/EN2000A6/VIB-15a/Transmitter
ZXP-T100/ZXP-T110/ZXP-T120/WZ-5A/WZ-5B/ZD24-ZF-1/ZD24-ZF-2 Transmitter
OD92 SLMCD-21T/ WINYV/ ZD8133/
SG-2 vibration sensor KR-939B fan safety operation monitor, KR-939B3 fan safety monitor, KR-939B4 fan safety monitor, KR-939B4-4 equipment safety monitor, KR-32 dual channel Equipment safety monitor, KR-34 four-channel equipment safety monitor, KR-939NCS type fan speed frequency meter JM-B-3Z-01-01-200 fan vibration monitoring and protection measuring instrument
VB-Z500B Rotating Machinery Condition Monitoring and Protection Table, VB-Z412 Dual Channel Shaft Displacement/Expansion Difference Monitor, VB-Z410/410A Shaft Displacement/Differential Expansion Monitor, VB-Z430F Dual Channel Bearing Vibration Monitor, VB-Z430 Double Channel bearing vibration monitor
VB-Z720 dual channel water swing monitor, VB-Z730 dual channel water vibration monitor, VB-Z420 dual channel vibration monitor, VB-Z470B wall mount positive and negative monitor, VB-Z470 positive and negative Monitor, VB-Z440 speed monitor
XZD-LG wall-mounted vibration intensity monitor, XZD-L vibration intensity monitor, XZD-4 four-channel vibration monitor, XZW-D axial displacement, differential monitor, XZS-04 intelligent speed monitoring Instrument, XZD-Z type shaft vibration monitor, XCW-R type thermal expansion stroke monitor, XCW-U type tank oil level monitor, XCW-Y oil motor stroke monitor, XZD-W type vibration monitor double channel bearing vibration Monitoring protector
WB8100E rotating machinery monitoring instrument, WB8600EH hydro-generator status monitoring instrument, WB8800E rotating machinery monitoring system, WB8501C digital display axial displacement monitor, WB-8381GE intelligent speed monitor, MLI-2001 dual-channel vibration monitor, XSM series Tachometer, WB8521C digital display relative expansion monitor, WB-8531C digital display thermal expansion monitor, WB-8112B digital display dual channel vibration monitor
JM-B-6Z monitoring and protection device, JM-B-6000 steam turbine monitoring and protection device, JM-B-3E dual channel vibration monitoring and protection device, JM-B-7 intelligent vibration monitoring and protection instrument, JM-B-201 intelligent vibration temperature Detector, JM-B-4 vibration temperature monitoring and protection device, JM-B-3Z intelligent vibration monitoring and protection device, JM-B-6Z (402) monitoring and protection device, JM-B-5S vibration monitoring and protection device, JM-X -3 series intelligent travel monitoring and protection instrument, JM-X-3W intelligent axial displacement monitoring and protection instrument, JM-X-3Z intelligent differential expansion monitoring and protection instrument, JM-C-3 series intelligent speed monitoring and protection instrument, JM-C- 7F wall-mounted anti-rotation speed monitoring and protection instrument, JM-C-5S speed monitoring and protection instrument, JM-C-6C three take two speeding monitoring and protection instrument
OD9200T/MLS/V-9/ FZB/YMLV/JX73/JX73ST/BJ230 integrated vibration transmission
00-B/S9210/S9220/S9260/S9860/02/S9820/02/S9881/01/JX5151/JX5121 Transmitter
VB-Z330/VB-Z310/VB-Z320/MMS3110/MMS3120/MMS3210/MMS3311/MMS3410/VRS20/MLV/D Transmitter HR-2000/TR4101/
SJ6011/SJ6021/SJ6031 transmitter thread m10×1.5 ordering guide selection code trlv-a□□-b□□ selection description sensitivity a□□01——20mv/mm/s; 02——30mv/mm/s ;03——50mv/mm/s measuring direction b□□01——vertical; 02——level; 03——vertical and horizontal dual-purpose sz-5/sz-6/sz-6b/trlv/tm0793v/tm079vd/ 9200/74712/47633 magnetoelectric vibration velocity sensor cd-1/cd-2/cd-4/cd-4a/cd-6/cd-6a/cd-7-c/cd-7-s/cd-8 /Wagite vibration sensor cd-21-2-c/cd-21-2-s/cd-21-t/cd-21c/s/bcd-21a/cd721/wind vibration speed sensor mls-9/mlv-6 /mlv-7/mlv-8/mlv-9200/mlv-9268/mlv-27/mt1/mt2t/mt3t/mt3m/vibration sensor cs-cd-001/cs-cd-vibration probe CZJ-B2/B3/ B4/B3G/B4G vibration monitor 010/od9200/od9300/s6000/pr9266/pr9268/20/30/60/70/bearing vibration sensor mlv-SDJ-3, 3B, SDJ-3B/G vibration monitor 9200 (16699 /900)/9200/74712/47633/ht-2zd-24/zd25/zdf bearing vibration speed sensor vb-z9500/vb-z9600/sj1061/sj1062 magnetoelectric vibration speed sensor tm0782a/tm0783a/ca-yd/yd/ Kd/tm0782a/winh/mta/pr9270/shq-25x/200150/200155/200157/200350/200355/ca-gt acceleration transmission LVdt displacement sensor 1000td2000td3000td4000td5000td6000tdczj-b2/cz-6/cjz-d/cjz-d2/mli-2001/wb-9902/wb-8112b/zj2/zj2-a/bearing vibration monitoring protection instrument 8500/85100xy/85564/85200 /85850bcd-21a/vibrocontrol110/en900/en2000a1/vibration monitoring instrument zxp-f3200/zxp-j116/zxp-j200/zxp-j210/zxp-j220/dzx-400/pdm1201/wli-2004/wli-2003/wli- 2001/s2662/vrs2000a11/wli-2011/pt2010/11 Dual-channel bearing vibration monitor zxp-j400/zxp-j510/zxp-j520/xd-2/xzk-1/od-9008s/Double-channel tile cover vibration measuring instrument Od9004/s2162/s2112/vb-z420/vb-z430/vrs2000a11/vrs2000a1 vibration monitor vrs2000a3/vrs2000a4st-101/emt226/vib-10b/vib-5/zdy/pt908/sj-2011 bearing vibration monitoring instrument sj-2012 /sj-2031/sj-2021/sj-2022/sj-2051/sj-2052 vibration detection and protection instrument tr81/dwqz/trin/7200/3300/pr6422/pr6423/pr6424/pr6425/pr6426/eddy current displacement sensor sd081082/ 85811/tm0180/tm0105/tm0182/winw/qh8500/se/cwy-do/axial displacement sensor ky8500/od9000/9000xl/s2100/s2200/vb-z9100/mlw3300/wd220 non-contact displacement sensor rdzw-2n
VB-Z9260, VB-Z2184, VB-Z8200, VB-Z2188, VB-Z2101, VB-Z2102, VB-12161 Transmitter
TK3-2/TM0520-K/-9292/JX-3B/S21330/S21320/OD9002/V503/V505/CIJ-J30/CIJ-J20/HV-520/VB-Z8901/DX-02/VRS5000/SE-11 /SE-41/PJD/VRS2000 Vibration Calibration Table Eddy Current Probe Calibration Instrument
TM0540/3300XL/WIN-400/HY-XY1/OD—9003(A/B)/S21310/VRS4000/XQ-15/DZ-30 eddy current probe static calibrator meter instrument ZH2062 programmable eccentricity monitor instrument ZH2072 Programmable displacement monitor instrument
BSQ series transmitter introduction BSQ001 power converter BSQ011 series vibration transmitter BSQ021 series shaft vibration transmitter BSQ031 series axial displacement transmitter BSQ051 series speed transmitter BSQ073 series stroke transmitter BS series installation box
YZHS/YZHV/YZH-S/YZH-V series integrated vibration bit transmitter YZH-B integrated vibration transmitter YZH-K series electronic vibration switch ZDT-2 portable vibration checker ZST-1 speed calibration Taiwan 8400 Series Static Calibrator Instrument ZY-350 Dynamic Calibrator Instrument
DWQZ series eddy current sensor SZ-4 type magnetoelectric speed sensor SZ-6 (C) type magnetoelectric speed sensor SZ-6B type magnetoelectric speed sensor SZ-6i type explosion-proof magnetic type speed sensor ZHS-9/ZHV -9 integrated ultra low frequency vibration displacement sensor SMCB-01/02 magnetic sensitive speed sensor SZCB series magnetoresistive speed sensor TD series LVDT sensor UT-81 series LVDT sensor B49 (UHZ) series magnetic flip column liquid level sensor SZCB-01i Type explosion-proof magnetic resistance type speed sensor SZ-6i type explosion-proof magnetic electric speed sensor TD-1i type LVDT sensor
BSQ001/TM900/TM900-A00 Power Converter
8000C rotating machinery monitoring and protection device 8002C management and power module 8012C vibration monitor 8022C axis vibration monitor 8032C displacement monitor 8051C speed / impact sub-monitor 8052C speed monitor 8054C zero speed monitor 8056C anti-rotation speed monitor 8062C eccentric monitor 8072C Travel monitor 8102C temperature (thermocouple) monitor 8106C temperature (thermal resistance) monitor 8142C universal monitor 8150C dual channel key phase 8163C three take two overspeed protector
8000B series monitoring and protection device system 8000B-000 instrument instrumentation chassis 8000B-001 instrument instrumentation power supply 8000B-012 dual channel bearing vibration function module 8000B-022 dual channel axis vibration function module 8000B-032 dual channel axial displacement function module 8000B- 042 dual channel expansion function module 8000B-051 single channel speed / zero speed / emergency interrupt function module 8000B-061 single channel eccentric function module 8000B-072 dual channel thermal expansion function module 8000B-082 dual channel valve position function module 8000B-092 Dual channel fuel tank oil level function module 8000B-102, 106 dual channel temperature function module 8000B-142 dual channel universal display function module 8000B-150 key phase function module 8000B-162 dual channel three take two function module 8000B speed monitoring protection device palm Computer configuration software configuration software acquisition software
8000 series monitoring and protection device 8000-01 instrument instrumentation chassis 8000-001 instrumentation instrument power supply 8000-011 (012) bearing pad vibration monitoring protection instrument instrument 8000-022 axis vibration monitoring protection instrument instrument 8000-031 (032) axial displacement monitoring Protection instrument meter 8000-041 (042) expansion monitoring device 8000-051 speed zero speed monitoring protection instrument meter 8000-061 eccentric monitoring protection instrument meter 8000-071 (072) cylinder expansion monitoring protection instrument meter 8000-081 (082 ) Valve position stroke (oil motive) monitoring and protection instrument meter 8000-091 (092) fuel tank oil level monitoring and protection instrument meter 8000-102 temperature monitoring protection instrument meter 8000-142 universal display instrument meter (level gauge) 8000-150 key
Head CON011/91, CON021/91, CON031/91 eddy current axis displacement sensor shaft vibration probe front end
TM0105/TM0180/TM0110/TM0120/TM0393 eddy current axis displacement sensor shaft vibration probe TM0182 eddy current axis displacement sensor shaft vibration probe front end TM0181 eddy current axis displacement sensor shaft vibration probe extension cable
MMS6110 dual channel shaft vibration measurement module MMS6120 dual channel vibration measurement module MMS6210 dual channel displacement measurement module MMS6220 dual channel axis eccentricity measurement module MMS6312 dual channel speed key phase module MMS6410 dual channel cylinder expansion measurement module MMS6418 absolute relative differential measurement module MMS6831RS485 Communication unit MMS6823RS485 conversion module DOPS three take two speed measurement system a/czqz/rdzw-2/rdzw-2n/wb-8501c/8521c/8531c/85300-dw/axial displacement monitoring protection instrument 85350/85710/en2000a2/hy- 01/tpm/dtpm/od9006/s2102/vrs2000a2/axial displacement detection monitor rdzw-2na/czqx/rdcz/rdcz-2/85710/hy-02/dem/ddem/s2161a/vrs2000a5/expansion monitoring protection instrument szcb -01/pr9376/sm-10/12/14/16/t-03/szmb-5/9/szmb-01 magnetoresistive speed sensor smcb-01/s16/sms-12/16/e12-e12s-e58a -e58s/d12-d12p/f12a-f12s-f58a-f58s/y12ad/dsd/dsf/dse/dsh magnetic sensitive speed sensor hk-16/cm16/s16/hb2032/sc12-20k/gvs gear speed sensor dzc-02 /dzc-02a tachometer dm504/hy-zs3/szc-04f1/wz-7a anti-speed detection monitoring protection table hy-zs3f anti-speed sensor szc-04/szc-04b/szc-04f/85700/85790/jms/hy -01/xsm/df9011 smart tachometer Surveillance protection instrument xjp-10b/02a/42a/xsv-01/sqy01t/mft/sqy11-04/ras/sky/szc/sqyc/cs-1/sqy01/qydpm/sqy08td intelligent speed digital display instrument ai-tek (airpax )/tach-pak1tach-pak3tachtrol2tachtrol3/mv-vi intelligent speed monitor wz-3c/wz-1d/wz-6a/ai-tek(airpax)/en2000a3/smart tachometer hy-zs1/hy-zs2a/hy- Bt1/hy-zs2/hy-zs3/hy-cs1/od9001/s2183/s2181/Intelligent tachometer vb-z410/vb-z440/vb-z470/vrs2000a7/xhf-201/wb-8581 intelligent speedometer df9032 thermal expansion monitoring Instrument sw-2/td-2 displacement monitor 3500/3300/7200/pt2060/pt2010/rms700/mms3000/mms6000/vb4000/tn8000/win2000/vm600/en8000/en9000/mv2000/mv3000/s8100/8500/9000/ Zxp-jk6600/s32000/s36000/8000b series rotating machinery monitoring and protection device slmcd-21t/winyv/zd8133/od9200t/mls/v-9/fzb/ymlv/jx73/jx73st/bj230 integrated vibration transmission tr2001/tr2011/tr2031/ Tr2061/tr2081/trzf/tr95 transmitter dtm/tm101/tm201/tm202/tm301/tm302/tm501/tm502/transmitter slm/winv/en2000a4/en2000a5/en2000a6/transmitter zxp-t100/zxp-t110/ Zxp-t120/wz-5a/wz-5b/zd24-zf-1/zd24-zf-2 transmitter od9200-b/s9210/s9220/s9260/s9860/02/ S9820/02/s9881/01/jx5151/jx5121 transmitter vb-z330/vb-z310/vb-z320/mms3110/mms3120/mms3210/mms3311/mms3410/vrs20/mlv/d transmitter vib-15a/hr- 2000/tr4101/sj6011/sj6021/sj6031 transmitter tm0540/3300xl/win-400/hy-xy1/od-9003(a/b)/s21310/vrs4000/xq-15/dz-30 eddy current probe static calibration instrument
HZS-04F intelligent anti-tachometer, HZS-04T wall-mounted intelligent tachometer, HZS-04 intelligent tachometer, HZS-04M electronic module tachometer, HZS-04C intelligent tachometer, HZD-Z/W Type wall-mounted intelligent vibration temperature monitor HZD-W/L type intelligent vibration monitor, HZD-W/L type four-channel vibration monitor, HZD-Z type intelligent axis vibration monitor, HZD-W type intelligent vibration monitor , HZD-L type intelligent vibration intensity monitor, HXW-U type intelligent fuel tank oil level monitor, HXW-Y type intelligent oil motivation monitor, HXW-R type intelligent thermal expansion monitor
8500LD dual-channel intensity monitor, 8500ZD dual-channel vibration monitor SW-2 displacement monitor, RDPX eccentric monitor, 85200-W displacement monitor fan motor dual-channel bearing vibration monitoring and protection instrument
MLI3000 vibration monitor, MLI-2001 speed detector, MLI-2010 water swing monitor, MLI-2009 eccentric monitor, MLI-2007 speed monitor, MLI-2005 differential monitor, MLI-2004 bearing vibration intensity Monitor
SZ-5/SZ-6/SZ-6B/TRLV/TM0793V/TM079VD/9200/74712/47633 Magnetoelectric Vibration Speed ​​Sensor
CD-1/CD-2/CD-4/CD-4A/CD-6/CD-6A/CD-7-C/CD-7-S/CD-8/Watt Cap Vibration Sensor
CD-21-2-C/CD-21-2-S/CD-21-T/CD-21C/S/BCD-21A/CD721/WIND vibration speed sensor
MLS-9/MLV-6/MLV-7/MLV-8/MLV-9200/MLV-9268/MLV-27/MT1/MT2T/MT3T/MT3M/Vibration Sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/ Bush vibration sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/Axis vibration vibration sensor
MLV-9200 (16699/900)/9200/74712/47633/HT-2ZD-24/ZD25/ZDF bearing vibration speed sensor
VB-Z9500/VB-Z9600/SJ1061/SJ1062 magnetoelectric vibration speed tile sensor
TM0782A/TM0783A/CA-YD/YD/KD/TM0782A/WINH/MTA/PR9270/SHQ-25X/200150/200155/200157/200350/200355/CA-GT Acceleration Sensor Portable Speed ​​Sensor Calibration Table Six-Wire LVDT Displacement Sensor 1000TD 2000TD 3000TD 4000TD 5000TD 6000TD 7000TD 8000TD 9000TD 10000TD 11000TD 12000TD Three-wire LVDT displacement sensor HR-DC displacement sensor, 3000HR-DC, 1000HR-DC, 500HR-DC, 200HR, 500HR, 1000HR, 2000HR, 3000HR, 5000HR, 10000HR PTS420 Displacement Sensor, PTS420 Position Transmitter, PTS420-5000 Position Sensor, PTS420-10000 HCT420 Displacement Sensor, HCT420 Position Transmitter, HCT420-5000 Position Sensor, HCT10000, HCT IS5000, HCT IS 10000 GCA/GCD Rebound Displacement sensor, GCA rebound displacement sensor, GCD rebound displacement sensor, GCD-SE, HC485 LBB ultra-precision displacement sensor, LBB-315PA, LBB-375PA
ATML-M1450-0600AT100/BTL5-E10-M0350-P-S32 Displacement Sensor JY PRT LVDT Shift Sensor
SDW-i/TR81/DWQZ/TRIN/7200/3300/PR6422/PR6423/PR6424/PR6425/PR6426/CWY-DO/8108-01/8108-02/8108-03/8111-01/8111-02/8111- 03/8125-01/8125-02/8125-03/CWY-DO-20T08 eddy current axis displacement sensor shaft vibration probe front end
SD081082/85811/TM0180/TM0105/TM0182/WINW/QH8500/SE/CWY-DO/8300/HTW Axial Displacement Sensor Shaft Vibration Probe Front-end Fan Motor Dual-channel Bearing Vibration Monitoring and Protection Instrument
KY8500/OD9000/9000XL/S2100/S2200/VB-Z9100/MLW3300/WD220/QRD/HRD/QZHF rod non-contact displacement sensor shaft vibration probe front-end
RDZW-2Na/CZQZ/RDZW-2/RDZW-2N/WB-8501C/8521C/8531C/85300-DW/16C4-A axial displacement monitoring and protection instrument display table
85350/85710/EN2000A2/HY-01/TPM/DTPM/OD9006/S2102/VRS2000A2/HZWY-20A/ZQZ-10/ZQZ-11/ZQZ-21/ZQZ-II axial displacement detection monitor instrument turbine axial displacement Measuring protection device
RDZW-2Na/CZQX/RDCZ/RDCZ-2Na/85710/HY-02/DEM/DDEM/S2161A/VRS2000A5/HZWY-20A/WB-8521C Differential Monitoring and Protection Instrumentation Relative Expansion Monitor Instrumentation Fan Motor Dual Channel Bearing Vibration Monitoring and protection instrument
S-ZS/SZCB-01/SZCB-02/SZCB-03/SZCB-04/PR9376/SM-10/12/14/16/T-03/SZMB-5/9/SZMB-01/SZMB-3/ SZMB-4/ZS-01/ZS-03/ZS-02/ZS-04/KMY20M/KMY/Z20S/KMY20M1/SM6-XS12JK-
It is composed of standard chassis 160×80 (mm). Each monitor has two channels A and B, and independent LED display mode. Independent 4 to 20 mA output, independent switching output.
For a rotating machine to measure its comprehensive mechanical situation, the vibration amplitude of the rotor is a basic indicator of Zui.
The dual-channel bearing vibration monitoring protector comes from a separate SG-2 speed sensing signal, or a CWY-DO type eddy current sensing signal, which continuously displays the amplitude value of the channel on the LED digital display. In order to be fully protected, two sensors with an angle of 90° need to be installed on one bearing. Vertical or horizontal installation is required. If the user needs, the factory can provide a protective box with glass door on the outside, the dimensions of the product: length 258 wide 158 deep 460; SG-2 sensor fixing screws or mounting base can be provided, the base size is 40×40mm, can be installed vertical and 2 sensors in the horizontal direction.
Second, technical indicators
It is an intelligent instrument that cooperates with the SZ-6 series magnetoelectric speed sensor to continuously monitor and measure the amplitude and intensity of the absolute vibration of the bearings of various rotating machinery.
It is available in both disc and wall styles.
The main function
With linear trimming. With power-on and power-down protection.
The historical peak and historical alarm status after the alarm is automatically saved.
Set parameters and measurement history parameters can be saved for a long time after power failure.
Technical Parameters
Input signal: SZ series magnetoelectric speed sensor;
Frequency response range: vibrating table 10~200Hz; intensity meter 10~100Hz;
Display mode: 3-digit LED digital display, accuracy: ±1.0%;
Measuring range: 0~500μm (peak-to-peak amplitude value); 0~30.0mm/s (vibration intensity);
CZJ-B vibration protection instrument CZJ-B2, CZJ-B3
SDJ-3L-S2 vibration intensity monitor
Current output: linear output of 4~20 mA corresponding to the range;
Accuracy: ±1.0% of full scale; Zui large load: 500Ω;
Buffered output: sensor raw signal output (TDM signal);
Alarm setting: 2 points per channel upper limit, and arbitrarily set within the full scale range;
Alarm output: LED indicator, relay switch output, capacity AC250V
/2A, DC28V /2A;
Use power: 220VAC ± 10%, 50Hz ± 5%; power consumption <10W;
Operating environment: temperature 0~50 °C; storage temperature -40~60 °C; relative humidity
20~90% (non-condensing);
No corrosive or strong magnetic field around;
Dimensions: panel mounted table: width 160 × height 80 × depth 225 (mm3);
Opening size: width 152 × height 76 (mm2);
Wall table: width 190 × height 290 × thickness 92 (mm3);
Installation size: bottom 170 × height 272 (mm2). (Equilateral triangle
SDJ-3L-S2 vibration intensity monitor
◠Output: constant current: 4 ~ 20mA (load <1KΩ)
â— Constant voltage: 1~5V or oscillometric analysis output â— Alarm setting: Any setting within 0~200um â— Switching output: DC27V/1A or AC220V/2A
◠Noise level: ≤1% (full scale value) when no signal is input
◠Operating environment: temperature -25 ~ 45 ° C
Relative humidity ≤80%
◠Power supply voltage: AC 220V ± 10% / 50Hz
The SDJ-3 vibration monitor is a common type of vibration meter.
SDJ-3B vibration monitoring and protection instrument is a safe and reliable instrument.
HN-2 intelligent vibration monitor is used for long-term monitoring of vibration intensity and displacement of rotating machinery with speed of 600~60000/min. It is matched with magneto-electric vibration speed sensor to monitor vertical and horizontal vibration and vibration of rotating machinery. The value is displayed by the front panel of the instrument, and has a standard analog current output. It can be mated with various DCS and PLC systems. When the vibration value exceeds the limit, the instrument can be connected with an external sound and light alarm to prompt the field operator to take preventive measures. And there are two levels of alarm switch output to protect the machine safe and reliable operation.
Function description realizes intelligent processing: alarm I value, II value can be adjusted by the panel button panel button, no potentiometer adjustment, convenient on-site debugging for one minute without pressing the operation button, can return to the running state alarm delay adjustment range 1~60 seconds, to prevent accidental alarm caused by on-site interference, with upper and lower power detection function, sensor drop detection function, cut off alarm and stop output circuit at the same time, can effectively suppress instrument false alarm JM-B-3Z-01-01- 200 fan vibration monitoring protects the measuring instrument vibration intensity (vibration intensity) and vibration displacement (vibration amplitude) manually switched.
Technical index frequency range: 10~1000Hz
Range: 0~20.0mm/s or 0-200um (adjustable)
Accuracy: ±1% (full scale)
Current output: 4~20mA
Switching output: DC 30V / 5A or AC250V/5A (normally open)
Alarm setting: arbitrarily set ambient temperature in full scale: running time: 0~65°C
When storing: -30~80°C
Relative humidity: up to 95%, non-condensing power supply voltage: 220VAC/50Hz ± 10% 50mA
Dimensions: 160 × 80 × 250mm
Opening size: 152+1×74+1mm
â— Measurement range: Frequency: 10 ~ 300Hz
â— Amplitude: 0~200um (peak to peak)
(The range can be customized by the user)
◠Accuracy: ≤±0.5% (full scale value)
◠Frequency response: 40~60Hz≤±1%
30～200Hz≤±2%
10～300Hz≤±3%
JM-B-3Z-01-01-200 fan vibration monitoring and protection measuring instrument
Technical Parameters
1. Display mode: LED digital display, LCD liquid crystal display (optional)
2. Range: Frequency response: 1 ~ 3KHz (axis vibration) / 10 ~ 300Hz (watt vibration)
Amplitude: arbitrarily set within 0 to 500 μm (peak-to-peak); Factory default: 0 to 200 μm
Intensity: Any setting within 0~50.0mm/s (effective value); Factory default: 0~20.0mm/s
3. Measurement accuracy: ±0.5, linear error ≤1%FS
4. Input signal: Signal of the ZHJ-2 vibration speed sensor,
CWY-DO-Φ8mm eddy current sensor,
ZHJ-3D low frequency vibration sensor signal
5. Output signal: Current output: 4 ~ 20mA (load ≤ 1KΩ)
Secondary switching output: DC 27V/2A or AC250V/5A
6. Ambient temperature: -10～65°C (relative humidity: ≤85%)
7. Supply voltage: AC220V/50Hz±10%
8. Installation method: disc type
9. Dimensions: Regular style: 170mm (length) × 95mm (height) × 260mm (deep)
Vertical: 95mm (length) × 170mm (height) × 260mm (deep)
10. Opening size: regular style: 152mm (length) × 77mm (height)
Vertical: 77mm (length) × 152mm (height)
Front panel function
Channel I display box: in the running state, the channel I vibration value is displayed; in the parameter setting state, the parameter flag is displayed;
Channel II display box: in the running state, the channel II vibration value is displayed; in the parameter setting state, the parameter value corresponding to the parameter flag is displayed;
Alarm indicator: When the measured value exceeds the alarm setting range, the alarm indicator lights up;
Set button: Press and hold the button for 5 seconds to enter the parameter setting state; in the parameter setting state, press this button to enter the parameter editing state. After editing the parameters, press this button to confirm the modified parameters. After setting the parameters, press and hold for another 5 seconds to return to the working state and save the set parameters.
â–² key: In the parameter view state, press this key to view the next parameter; in the parameter editing state, you can add 1 to the parameter to be edited, the number range is 0~9;
(â†) Cursor left shift key: In the parameter editing state, move the number of parameter digits to be set, such as from single digit to hundred digits;
Confirmation key: Press the Enter key to confirm the edit. After setting the parameters, press the Enter key to confirm and proceed to the next parameter setting selection.
Parameter setting and operation The instrument has been debugged before leaving the factory, and can be used directly by the user. If you need to check the factory parameters of the instrument or modify it, you can perform the following operations.
After power-on, the meter is in operation and the panel displays the speed of each channel.
The various parameters of the instrument are set by the panel's “Setting, â–², â†, OKâ€. Each parameter has a corresponding flag representation. The order and steps are as follows:
Parameter flag
Parameter Description
Setting range
EE1?
Channel I Alarm I
0~999
PP1?
Channel I Alarm II
0~999
LL1?
Channel I range
0~999
EE2?
Channel II Alarm I
0~999
PP2?
Channel II Alarm II
0~999
LL2?
Channel II range
0~999
EE-
Alarm delay (default 1 second)
0~60
Note: In the parameter setting mode, the parameter flag is displayed in the channel I display box, and the corresponding parameter value is displayed in the channel II display box.
Press the “Set†button for about 5 seconds to enter the parameter setting mode. “EE1?†is displayed in the panel channel I display box, and the factory channel I alarm I value “06.0†is displayed in the channel II display box. Press “OK†to enter the parameter editing mode. At this time, the low digit flashes. Use the “▲†key to add 1 to the digit. The range is 0-9. Press “â†â€ to flash the previous digit. Use the “▲†button to modify this digit; and so on, press the “â†â€ button to select the number to be modified, and then use the “▲†button to modify the digit. Press the “Confirm†button to edit the parameter. carry out. Press the “▲†key to continue setting the next parameter. Or press and hold the "Settings" button to return to normal working condition. When changing the delay, select HHP, change 001 to 004, confirm the next menu, find EE-, and modify the default value.
Terminal board wiring diagram and sensor installation
Debugging instructions
The instrument has been verified before leaving the factory and can be used directly by the user.
The installation mode monitor is installed in the centralized control room. When installing, the monitor is inserted from the front of the centralized control room, and then the left and right mounting brackets are provided from the rear (provided by the manufacturer), and the screws can be tightened. Then connect the input and output lines to the rear terminal block of the monitor as required.
Vibration probe CZJ-B2/B3/B4/B3G/B4G vibration monitor
8000/B/C/E series combined monitoring and protection device, RDZW series axial displacement monitor, RDCZ series differential expansion monitor, RDXZ series shaft vibration monitor, CZJ-B series vibration monitor, CZJ-4D type four channel Vibration monitor
SZC-04 series intelligent tachometer, SZC-04F series intelligent speed counter tachometer, DZC-02A tachometer SDJ-3, 3B, SDJ-3B/G vibration monitor
HZD-8500/C/D turbine monitoring and protection device, HZD-RSDC type overspeed protection device, 8500B rotating machinery monitoring and protection system, HZW type axial displacement monitor, HZW-Z type intelligent differential expansion monitor, HZS-04N type intelligent Tachometer
VS-068/VS-069/VS-077/VS-079/VS-080/VS-168/VS-169/VS-177/VS-277/VS-288/VS-289/Watt vibration speed sensor
PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70 electric absolute vibration tile sensor
PR6418 relative displacement sensor PR9350 inductive displacement sensor PR9376 speed sensor PR9270 acceleration sensor
TM0782A-K/TM0783A/TM0793V-K/TM079VD Watt Vibration Sensor PT079VD Low Frequency Magnetoelectric Speed ​​Displacement Sensor
SDJ-3, 3B, SDJ-3B/G vibration monitor
SD-051/IN-081/IN-083/IN-084/IN-085/INA-081/INA-083/INA-085/DS-1051/DS-1052/DS-1053/DS-1054/SD- 052/SD-053/SD-054/SD-081/SD-083/SD-084/SD-087/SD-088/SD-089/SDH-151/SDH-154/SD-161/
SD-164/WT-010/WT-025 eddy current axis displacement sensor shaft vibration probe vibration probe CZJ-B2/B3/B4/B3G/B4G vibration monitor dual channel bearing vibration monitoring protection instrument
OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165 eddy current axis displacement sensor shaft vibration Probe front end
EC-001/EC-002/EC-003 eddy current axis displacement sensor shaft vibration probe extension cable
PR6422/PR6423/PR6424/PR6425/PR6426 eddy current axis displacement sensor shaft vibration probe CON011/91,
Technical parameter sensitivity 20～50mv/mm/s±1% (according to user adjustment) Frequency response (optional) 5～100hz, 10～500hz, 10～1000hz natural frequency about 10hz amplitude limit 2mm (peak-peak) Zui large acceleration 10g installation method vertical; horizontal; vertical, horizontal dual-use temperature range -30 ° C ~ 120 ° C relative humidity to 95% non-condensing Dimensions φ 35 × 78mm weight about 350g installation J2 / ZJ2-A / bearing vibration monitoring protection device
8500/85100XY/85564/85200/85850BCD-21A/VIBROCONTROL110/ EN900/EN2000A1/Vibration Monitoring Instrument
ZXP-F3200/ZXP-J116/ZXP-J200/ZXP-J210/ZXP—J220/DZX-400/PDM1201/WLI-
2004/WLI-2003/WLI-2001/S2662/Double channel bearing vibration monitoring and protection device
VRS2000A11/
WLI-2011/PT2010/11 dual channel bearing vibration monitor
ZXP-J400/ZXP—J510/ZXP—J520/XD-2/XZK-1/OD-9008S/Double-channel tile cover vibration measuring instrument
OD9004/S2162/S2112/VB-Z420/VB-Z430/VRS2000A11/VRS2000A1 vibration monitor
VRS2000A3/VRS2000A4ST-101/EMT226/VIB-10b/VIB-5/ZDY/PT908/SJ-2011 bearing vibration monitoring instrument
SJ-2012/SJ-2031/SJ-2021/SJ-2022/SJ-2051/SJ-2052 vibration detection and protection device
TR81/DWQZ/TRIN/7200/3300/PR6422/PR6423/PR6424/PR6425/PR6426/Electro-Vortex Displacement Sensor
SD081082/85811/TM0180/TM0105/TM0182/WINW/QH8500/SE/CWY-DO/Axial Displacement Sensor
KY8500/OD9000/9000XL/S2100/S2200/VB-Z9100/MLW3300/
WD220 non-contact displacement sensor
RDZW-2Na/CZQZ/RDZW-2/RDZW-2N/WB-8501C/8521C/8531C/85300-DW/Axial Displacement Monitoring and Protection Device
85350/85710/EN2000A2/HY-01/TPM/DTPM/OD9006/S2102/ VRS2000A2/Axial Displacement Detection Monitor
RDZW-2Na/CZQX/RDCZ/RDCZ-2/85710/
HY-02/DEM/DDEM/ S2161A/
VRS2000A5/Expansion monitoring and protection device
SZCB-01/PR9376/SM-10/12/14/16/T-03/SZMB-5/9/SZMB-01 Reluctance Speed ​​Sensor
SMCB-01/S16/SMS-12/16/E12-E12S-E58A-E58S/D12-D12P/F12A-F12S-F58A-F58S/
Y12AD/DSD/DSF/DSE/DSH magnetic sensitive speed sensor
HK-16/CM16/S16/HB2032/SC12-20K/GVS Gear Speed ​​Sensor
DZC-02/DZC-02A tachometer
DM504/HY-ZS3/WZ-7A anti-rotation speed monitoring and protection table
HY-ZS3F anti-speed sensor
SZC-04/SZC-04B/85700/85790/JMS/HY-01/XSM intelligent tachometer monitoring and protection device
XJP-10B/02A/42A/XSV-01/SQY01T/MFT/SQY11-04/RAS/SKY/SZC/SQYC/CS-1/
SQY01/QYDPM/SQY08TD intelligent speed digital display
AI-TEK (AIRPAX)/Tach-pak1Tach-pak3Tachtrol2Tachtrol3/MV-VI intelligent speed monitor
WZ-3C/WZ-1D/WZ-6A/AI-TEK(AIRPAX)/EN2000A3SZC-04/SZC-04B/Intelligent Speed ​​Measuring Instrument
HY-ZS1/HY-ZS2A/HY-BT1/HY-ZS2/HY-ZS3/HY-CS1/OD9001/S2183/S2181/Smart Tachometer
VB-Z410/VB-Z440/VB-Z470/ VRS2000A7/ XHF-201/WB-8581 intelligent speedometer
DF9032 thermal expansion monitor
3500/3300/7200/PT2060/PT2010/RMS700/MMS3000/MMS6000/VB4000/TN8000/WI
N2000/VM600/EN8000/EN9000/MV2000/MV3000/S8100/8500/9000/ZXP—JK6600/S32000/
S36000/8000B series rotating machinery monitoring and protection device
TR2001/TR2011/TR2031/TR2061/TR2081/TRZF/TR95 transmitter
DTM/TM101/TM201/TM301/SLM/WINV/EN2000A4/EN2000A5/EN2000A6/VIB-15a/Transmitter
ZXP-T100/ZXP-T110/ZXP-T120/WZ-5A/WZ-5B/ZD24-ZF-1/ZD24-ZF-2 Transmitter
OD92 SLMCD-21T/ WINYV/ ZD8133/
SG-2 vibration sensor KR-939B fan safety operation monitor, KR-939B3 fan safety monitor, KR-939B4 fan safety monitor, KR-939B4-4 equipment safety monitor, KR-32 dual channel Equipment safety monitor, KR-34 four-channel equipment safety monitor, KR-939NCS type fan speed frequency meter JM-B-3Z-01-01-200 fan vibration monitoring and protection measuring instrument
VB-Z500B Rotating Machinery Condition Monitoring and Protection Table, VB-Z412 Dual Channel Shaft Displacement/Expansion Difference Monitor, VB-Z410/410A Shaft Displacement/Differential Expansion Monitor, VB-Z430F Dual Channel Bearing Vibration Monitor, VB-Z430 Double Channel bearing vibration monitor
VB-Z720 dual channel water swing monitor, VB-Z730 dual channel water vibration monitor, VB-Z420 dual channel vibration monitor, VB-Z470B wall mount positive and negative monitor, VB-Z470 positive and negative Monitor, VB-Z440 speed monitor
XZD-LG wall-mounted vibration intensity monitor, XZD-L vibration intensity monitor, XZD-4 four-channel vibration monitor, XZW-D axial displacement, differential monitor, XZS-04 intelligent speed monitoring Instrument, XZD-Z type shaft vibration monitor, XCW-R type thermal expansion stroke monitor, XCW-U type tank oil level monitor, XCW-Y oil motor stroke monitor, XZD-W type vibration monitor double channel bearing vibration Monitoring protector
WB8100E rotating machinery monitoring instrument, WB8600EH hydro-generator status monitoring instrument, WB8800E rotating machinery monitoring system, WB8501C digital display axial displacement monitor, WB-8381GE intelligent speed monitor, MLI-2001 dual-channel vibration monitor, XSM series Tachometer, WB8521C digital display relative expansion monitor, WB-8531C digital display thermal expansion monitor, WB-8112B digital display dual channel vibration monitor
JM-B-6Z monitoring and protection device, JM-B-6000 steam turbine monitoring and protection device, JM-B-3E dual channel vibration monitoring and protection device, JM-B-7 intelligent vibration monitoring and protection instrument, JM-B-201 intelligent vibration temperature Detector, JM-B-4 vibration temperature monitoring and protection device, JM-B-3Z intelligent vibration monitoring and protection device, JM-B-6Z (402) monitoring and protection device, JM-B-5S vibration monitoring and protection device, JM-X -3 series intelligent travel monitoring and protection instrument, JM-X-3W intelligent axial displacement monitoring and protection instrument, JM-X-3Z intelligent differential expansion monitoring and protection instrument, JM-C-3 series intelligent speed monitoring and protection instrument, JM-C- 7F wall-mounted anti-rotation speed monitoring and protection instrument, JM-C-5S speed monitoring and protection instrument, JM-C-6C three take two speeding monitoring and protection instrument
OD9200T/MLS/V-9/ FZB/YMLV/JX73/JX73ST/BJ230 integrated vibration transmission
00-B/S9210/S9220/S9260/S9860/02/S9820/02/S9881/01/JX5151/JX5121 Transmitter
VB-Z330/VB-Z310/VB-Z320/MMS3110/MMS3120/MMS3210/MMS3311/MMS3410/VRS20/MLV/D Transmitter HR-2000/TR4101/
SJ6011/SJ6021/SJ6031 transmitter thread m10×1.5 ordering guide selection code trlv-a□□-b□□ selection description sensitivity a□□01——20mv/mm/s; 02——30mv/mm/s ;03——50mv/mm/s measuring direction b□□01——vertical; 02——level; 03——vertical and horizontal dual-purpose sz-5/sz-6/sz-6b/trlv/tm0793v/tm079vd/ 9200/74712/47633 magnetoelectric vibration velocity sensor cd-1/cd-2/cd-4/cd-4a/cd-6/cd-6a/cd-7-c/cd-7-s/cd-8 /Wagite vibration sensor cd-21-2-c/cd-21-2-s/cd-21-t/cd-21c/s/bcd-21a/cd721/wind vibration speed sensor mls-9/mlv-6 /mlv-7/mlv-8/mlv-9200/mlv-9268/mlv-27/mt1/mt2t/mt3t/mt3m/vibration sensor cs-cd-001/cs-cd-vibration probe CZJ-B2/B3/ B4/B3G/B4G vibration monitor 010/od9200/od9300/s6000/pr9266/pr9268/20/30/60/70/bearing vibration sensor mlv-SDJ-3, 3B, SDJ-3B/G vibration monitor 9200 (16699 /900)/9200/74712/47633/ht-2zd-24/zd25/zdf bearing vibration speed sensor vb-z9500/vb-z9600/sj1061/sj1062 magnetoelectric vibration speed sensor tm0782a/tm0783a/ca-yd/yd/ Kd/tm0782a/winh/mta/pr9270/shq-25x/200150/200155/200157/200350/200355/ca-gt acceleration transmission LVdt displacement sensor 1000td2000td3000td4000td5000td6000tdczj-b2/cz-6/cjz-d/cjz-d2/mli-2001/wb-9902/wb-8112b/zj2/zj2-a/bearing vibration monitoring protection instrument 8500/85100xy/85564/85200 /85850bcd-21a/vibrocontrol110/en900/en2000a1/vibration monitoring instrument zxp-f3200/zxp-j116/zxp-j200/zxp-j210/zxp-j220/dzx-400/pdm1201/wli-2004/wli-2003/wli- 2001/s2662/vrs2000a11/wli-2011/pt2010/11 Dual-channel bearing vibration monitor zxp-j400/zxp-j510/zxp-j520/xd-2/xzk-1/od-9008s/Double-channel tile cover vibration measuring instrument Od9004/s2162/s2112/vb-z420/vb-z430/vrs2000a11/vrs2000a1 vibration monitor vrs2000a3/vrs2000a4st-101/emt226/vib-10b/vib-5/zdy/pt908/sj-2011 bearing vibration monitoring instrument sj-2012 /sj-2031/sj-2021/sj-2022/sj-2051/sj-2052 vibration detection and protection instrument tr81/dwqz/trin/7200/3300/pr6422/pr6423/pr6424/pr6425/pr6426/eddy current displacement sensor sd081082/ 85811/tm0180/tm0105/tm0182/winw/qh8500/se/cwy-do/axial displacement sensor ky8500/od9000/9000xl/s2100/s2200/vb-z9100/mlw3300/wd220 non-contact displacement sensor rdzw-2n
VB-Z9260, VB-Z2184, VB-Z8200, VB-Z2188, VB-Z2101, VB-Z2102, VB-12161 Transmitter
TK3-2/TM0520-K/-9292/JX-3B/S21330/S21320/OD9002/V503/V505/CIJ-J30/CIJ-J20/HV-520/VB-Z8901/DX-02/VRS5000/SE-11 /SE-41/PJD/VRS2000 Vibration Calibration Table Eddy Current Probe Calibration Instrument
TM0540/3300XL/WIN-400/HY-XY1/OD—9003(A/B)/S21310/VRS4000/XQ-15/DZ-30 eddy current probe static calibrator meter instrument ZH2062 programmable eccentricity monitor instrument ZH2072 Programmable displacement monitor instrument
BSQ series transmitter introduction BSQ001 power converter BSQ011 series vibration transmitter BSQ021 series shaft vibration transmitter BSQ031 series axial displacement transmitter BSQ051 series speed transmitter BSQ073 series stroke transmitter BS series installation box
YZHS/YZHV/YZH-S/YZH-V series integrated vibration bit transmitter YZH-B integrated vibration transmitter YZH-K series electronic vibration switch ZDT-2 portable vibration checker ZST-1 speed calibration Taiwan 8400 Series Static Calibrator Instrument ZY-350 Dynamic Calibrator Instrument
DWQZ series eddy current sensor SZ-4 type magnetoelectric speed sensor SZ-6 (C) type magnetoelectric speed sensor SZ-6B type magnetoelectric speed sensor SZ-6i type explosion-proof magnetic type speed sensor ZHS-9/ZHV -9 integrated ultra low frequency vibration displacement sensor SMCB-01/02 magnetic sensitive speed sensor SZCB series magnetoresistive speed sensor TD series LVDT sensor UT-81 series LVDT sensor B49 (UHZ) series magnetic flip column liquid level sensor SZCB-01i Type explosion-proof magnetic resistance type speed sensor SZ-6i type explosion-proof magnetic electric speed sensor TD-1i type LVDT sensor
BSQ001/TM900/TM900-A00 Power Converter
8000C rotating machinery monitoring and protection device 8002C management and power module 8012C vibration monitor 8022C axis vibration monitor 8032C displacement monitor 8051C speed / impact sub-monitor 8052C speed monitor 8054C zero speed monitor 8056C anti-rotation speed monitor 8062C eccentric monitor 8072C Travel monitor 8102C temperature (thermocouple) monitor 8106C temperature (thermal resistance) monitor 8142C universal monitor 8150C dual channel key phase 8163C three take two overspeed protector
8000B series monitoring and protection device system 8000B-000 instrument instrumentation chassis 8000B-001 instrument instrumentation power supply 8000B-012 dual channel bearing vibration function module 8000B-022 dual channel axis vibration function module 8000B-032 dual channel axial displacement function module 8000B- 042 dual channel expansion function module 8000B-051 single channel speed / zero speed / emergency interrupt function module 8000B-061 single channel eccentric function module 8000B-072 dual channel thermal expansion function module 8000B-082 dual channel valve position function module 8000B-092 Dual channel fuel tank oil level function module 8000B-102, 106 dual channel temperature function module 8000B-142 dual channel universal display function module 8000B-150 key phase function module 8000B-162 dual channel three take two function module 8000B speed monitoring protection device palm Computer configuration software configuration software acquisition software
8000 series monitoring and protection device 8000-01 instrument instrumentation chassis 8000-001 instrumentation instrument power supply 8000-011 (012) bearing pad vibration monitoring protection instrument instrument 8000-022 axis vibration monitoring protection instrument instrument 8000-031 (032) axial displacement monitoring Protection instrument meter 8000-041 (042) expansion monitoring device 8000-051 speed zero speed monitoring protection instrument meter 8000-061 eccentric monitoring protection instrument meter 8000-071 (072) cylinder expansion monitoring protection instrument meter 8000-081 (082 ) Valve position stroke (oil motive) monitoring and protection instrument meter 8000-091 (092) fuel tank oil level monitoring and protection instrument meter 8000-102 temperature monitoring protection instrument meter 8000-142 universal display instrument meter (level gauge) 8000-150 key
Head CON011/91, CON021/91, CON031/91 eddy current axis displacement sensor shaft vibration probe front end
TM0105/TM0180/TM0110/TM0120/TM0393 eddy current axis displacement sensor shaft vibration probe TM0182 eddy current axis displacement sensor shaft vibration probe front end TM0181 eddy current axis displacement sensor shaft vibration probe extension cable
MMS6110 dual channel shaft vibration measurement module MMS6120 dual channel vibration measurement module MMS6210 dual channel displacement measurement module MMS6220 dual channel axis eccentricity measurement module MMS6312 dual channel speed key phase module MMS6410 dual channel cylinder expansion measurement module MMS6418 absolute relative differential measurement module MMS6831RS485 Communication unit MMS6823RS485 conversion module DOPS three take two speed measurement system a/czqz/rdzw-2/rdzw-2n/wb-8501c/8521c/8531c/85300-dw/axial displacement monitoring protection instrument 85350/85710/en2000a2/hy- 01/tpm/dtpm/od9006/s2102/vrs2000a2/axial displacement detection monitor rdzw-2na/czqx/rdcz/rdcz-2/85710/hy-02/dem/ddem/s2161a/vrs2000a5/expansion monitoring protection instrument szcb -01/pr9376/sm-10/12/14/16/t-03/szmb-5/9/szmb-01 magnetoresistive speed sensor smcb-01/s16/sms-12/16/e12-e12s-e58a -e58s/d12-d12p/f12a-f12s-f58a-f58s/y12ad/dsd/dsf/dse/dsh magnetic sensitive speed sensor hk-16/cm16/s16/hb2032/sc12-20k/gvs gear speed sensor dzc-02 /dzc-02a tachometer dm504/hy-zs3/szc-04f1/wz-7a anti-speed detection monitoring protection table hy-zs3f anti-speed sensor szc-04/szc-04b/szc-04f/85700/85790/jms/hy -01/xsm/df9011 smart tachometer Surveillance protection instrument xjp-10b/02a/42a/xsv-01/sqy01t/mft/sqy11-04/ras/sky/szc/sqyc/cs-1/sqy01/qydpm/sqy08td intelligent speed digital display instrument ai-tek (airpax )/tach-pak1tach-pak3tachtrol2tachtrol3/mv-vi intelligent speed monitor wz-3c/wz-1d/wz-6a/ai-tek(airpax)/en2000a3/smart tachometer hy-zs1/hy-zs2a/hy- Bt1/hy-zs2/hy-zs3/hy-cs1/od9001/s2183/s2181/Intelligent tachometer vb-z410/vb-z440/vb-z470/vrs2000a7/xhf-201/wb-8581 intelligent speedometer df9032 thermal expansion monitoring Instrument sw-2/td-2 displacement monitor 3500/3300/7200/pt2060/pt2010/rms700/mms3000/mms6000/vb4000/tn8000/win2000/vm600/en8000/en9000/mv2000/mv3000/s8100/8500/9000/ Zxp-jk6600/s32000/s36000/8000b series rotating machinery monitoring and protection device slmcd-21t/winyv/zd8133/od9200t/mls/v-9/fzb/ymlv/jx73/jx73st/bj230 integrated vibration transmission tr2001/tr2011/tr2031/ Tr2061/tr2081/trzf/tr95 transmitter dtm/tm101/tm201/tm202/tm301/tm302/tm501/tm502/transmitter slm/winv/en2000a4/en2000a5/en2000a6/transmitter zxp-t100/zxp-t110/ Zxp-t120/wz-5a/wz-5b/zd24-zf-1/zd24-zf-2 transmitter od9200-b/s9210/s9220/s9260/s9860/02/ S9820/02/s9881/01/jx5151/jx5121 transmitter vb-z330/vb-z310/vb-z320/mms3110/mms3120/mms3210/mms3311/mms3410/vrs20/mlv/d transmitter vib-15a/hr- 2000/tr4101/sj6011/sj6021/sj6031 transmitter tm0540/3300xl/win-400/hy-xy1/od-9003(a/b)/s21310/vrs4000/xq-15/dz-30 eddy current probe static calibration instrument
HZS-04F intelligent anti-tachometer, HZS-04T wall-mounted intelligent tachometer, HZS-04 intelligent tachometer, HZS-04M electronic module tachometer, HZS-04C intelligent tachometer, HZD-Z/W Type wall-mounted intelligent vibration temperature monitor HZD-W/L type intelligent vibration monitor, HZD-W/L type four-channel vibration monitor, HZD-Z type intelligent axis vibration monitor, HZD-W type intelligent vibration monitor , HZD-L type intelligent vibration intensity monitor, HXW-U type intelligent fuel tank oil level monitor, HXW-Y type intelligent oil motivation monitor, HXW-R type intelligent thermal expansion monitor
8500LD dual-channel intensity monitor, 8500ZD dual-channel vibration monitor SW-2 displacement monitor, RDPX eccentric monitor, 85200-W displacement monitor fan motor dual-channel bearing vibration monitoring and protection instrument
MLI3000 vibration monitor, MLI-2001 speed detector, MLI-2010 water swing monitor, MLI-2009 eccentric monitor, MLI-2007 speed monitor, MLI-2005 differential monitor, MLI-2004 bearing vibration intensity Monitor
SZ-5/SZ-6/SZ-6B/TRLV/TM0793V/TM079VD/9200/74712/47633 Magnetoelectric Vibration Speed ​​Sensor
CD-1/CD-2/CD-4/CD-4A/CD-6/CD-6A/CD-7-C/CD-7-S/CD-8/Watt Cap Vibration Sensor
CD-21-2-C/CD-21-2-S/CD-21-T/CD-21C/S/BCD-21A/CD721/WIND vibration speed sensor
MLS-9/MLV-6/MLV-7/MLV-8/MLV-9200/MLV-9268/MLV-27/MT1/MT2T/MT3T/MT3M/Vibration Sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/ Bush vibration sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/Axis vibration vibration sensor
MLV-9200 (16699/900)/9200/74712/47633/HT-2ZD-24/ZD25/ZDF bearing vibration speed sensor
VB-Z9500/VB-Z9600/SJ1061/SJ1062 magnetoelectric vibration speed tile sensor
TM0782A/TM0783A/CA-YD/YD/KD/TM0782A/WINH/MTA/PR9270/SHQ-25X/200150/200155/200157/200350/200355/CA-GT Acceleration Sensor Portable Speed ​​Sensor Calibration Table Six-Wire LVDT Displacement Sensor 1000TD 2000TD 3000TD 4000TD 5000TD 6000TD 7000TD 8000TD 9000TD 10000TD 11000TD 12000TD Three-wire LVDT displacement sensor HR-DC displacement sensor, 3000HR-DC, 1000HR-DC, 500HR-DC, 200HR, 500HR, 1000HR, 2000HR, 3000HR, 5000HR, 10000HR PTS420 Displacement Sensor, PTS420 Position Transmitter, PTS420-5000 Position Sensor, PTS420-10000 HCT420 Displacement Sensor, HCT420 Position Transmitter, HCT420-5000 Position Sensor, HCT10000, HCT IS5000, HCT IS 10000 GCA/GCD Rebound Displacement sensor, GCA rebound displacement sensor, GCD rebound displacement sensor, GCD-SE, HC485 LBB ultra-precision displacement sensor, LBB-315PA, LBB-375PA
ATML-M1450-0600AT100/BTL5-E10-M0350-P-S32 Displacement Sensor JY PRT LVDT Shift Sensor
SDW-i/TR81/DWQZ/TRIN/7200/3300/PR6422/PR6423/PR6424/PR6425/PR6426/CWY-DO/8108-01/8108-02/8108-03/8111-01/8111-02/8111- 03/8125-01/8125-02/8125-03/CWY-DO-20T08 eddy current axis displacement sensor shaft vibration probe front end
SD081082/85811/TM0180/TM0105/TM0182/WINW/QH8500/SE/CWY-DO/8300/HTW Axial Displacement Sensor Shaft Vibration Probe Front-end Fan Motor Dual-channel Bearing Vibration Monitoring and Protection Instrument
KY8500/OD9000/9000XL/S2100/S2200/VB-Z9100/MLW3300/WD220/QRD/HRD/QZHF rod non-contact displacement sensor shaft vibration probe front-end
RDZW-2Na/CZQZ/RDZW-2/RDZW-2N/WB-8501C/8521C/8531C/85300-DW/16C4-A axial displacement monitoring and protection instrument display table
85350/85710/EN2000A2/HY-01/TPM/DTPM/OD9006/S2102/VRS2000A2/HZWY-20A/ZQZ-10/ZQZ-11/ZQZ-21/ZQZ-II axial displacement detection monitor instrument turbine axial displacement Measuring protection device
RDZW-2Na/CZQX/RDCZ/RDCZ-2Na/85710/HY-02/DEM/DDEM/S2161A/VRS2000A5/HZWY-20A/WB-8521C Differential Monitoring and Protection Instrumentation Relative Expansion Monitor Instrumentation Fan Motor Dual Channel Bearing Vibration Monitoring and protection instrument
S-ZS/SZCB-01/SZCB-02/SZCB-03/SZCB-04/PR9376/SM-10/12/14/16/T-03/SZMB-5/9/SZMB-01/SZMB-3/ SZMB-4/ZS-01/ZS-03/ZS-02/ZS-04/KMY20M/KMY/Z20S/KMY20M1/SM6-XS12JK-
QTK25 is a newly Tower Crane suited for rapid installation, which including telescopic tower and trolley with two types of rail travel and fixed leg.
The tower crane for the overall haul, rapid erection of the vertical, horizontal transport machinery. Mainly applied to the low construction projects, such as variety of workshops, freight yards, stations, terminals and other goods handling and stacking, and as both mobile lifting transport machinery.
Fast Erecting Crane,Scm Tower Crane,Mc Tower Crane,Potain Secondhand Tower Crane
Miliscorp Industry Ltd , https://www.mctowercrane.com