Industrial waste water treatment stainless steel stacked sludge dewatering machine
1.Suitable for sludge dewatering of high/low consistency.
2.There is no need to worry about jam up. Reduce the cleaning water consumption.
3.The Electrical Cabinet, disposal tank and dehydrator are integrated, which reduces the covering area and brings convenience to installment.
4.The dehydrator is enclosed working, which reduces the bad smell and improves the working environment.
5.Automatically working for 24 hours, reducing the labor strength of workers.
6.The slow running speed of screw shaft reduces the power consumption and noise.
7. It is made with stainless, extending the service life.
8. It is convenient for daily maintenance.
The main part of the dehydrator is a filter device that a screw runs through the stacked fixed rings and moving ring.
The small gaps between fixed rings and moving ring can filter the sludge, and the lumenbetween screw and rings is filled with polymer grains.
The moving ring transfers the sludge to the end of the machine with pressure and extrudes sludge cakes.
The running of the screw drives the moving ring to clean the gaps and avoid jam.
Product Application
•City mixed raw sewage
•Food & beverage industry
•Chemical industry
•Stone & mine sewage
•Leather & tannery sewage
•Paper & pulp sewage
•Elecro-plating sewage
•Pringting & dyeing sewage
•Power plant
•Petrochemical industry
Selection of models
Â
| Model | Ds Standard Treating Capacity | Sludge Flow | ||||||||
| Low→high consistency | 2000mg/L | 5000mg/L | 10000mg/L | 20000mg/L | 25000mg/L | 50000mg/L | ||||
| QLD101 | ≈3kg/h | ≈5kg/h | ≈1.5m³/h | ≈0.6m³/h | ≈0.5m³/h | ≈0.25m³/h | ≈0.2m³/h | ≈0.1m³/h | ||
| QLD131 | ≈5kg/h | ≈10kg/h | ≈2.5m³/h | ≈2m³/h | ≈1m³/h | ≈0.5m³/h | ≈0.4m³/h | ≈0.2m³/h | ||
| QLD132 | ≈10kg/h | ≈20kg/h | ≈5m³/h | ≈4m³/h | ≈2m³/h | ≈1m³/h | ≈0.8m³/h | ≈0.4m³/h | ||
| QLD201 | ≈6kg/h | ≈18kg/h | ≈4.5m³/h | ≈1.8m³/h | ≈1.5m³/h | ≈0.75m³/h | ≈0.6m³/h | ≈0.3m³/h | ||
| QLD202 | ≈18kg/h | ≈30kg/h | ≈9m³/h | ≈3.6m³/h | ≈3m³/h | ≈1.5m³/h | ≈1.2m³/h | ≈0.6m³/h | ||
| QLD301 | ≈30kg/h | ≈50kg/h | ≈15m³/h | ≈6m³/h | ≈5m³/h | ≈2.5m³/h | ≈2m³/h | ≈1m³/h | ||
| QLD302 | ≈60kg/h | ≈100kg/h | ≈30m³/h | ≈12m³/h | ≈10m³/h | ≈5m³/h | ≈4m³/h | ≈2m³/h | ||
| QLD303 | ≈90kg/h | ≈150kg/h | ≈45m³/h | ≈18m³/h | ≈15m³/h | ≈7.5m³/h | ≈6m³/h | ≈3m³/h | ||
| QLD304 | ≈100kg/h | ≈200kg/h | ≈50m³/h | ≈10m³/h | ≈20m³/h | ≈10m³/h | ≈8m³/h | ≈4m³/h | ||
| QLD352 | ≈120kg/h | ≈200kg/h | ≈60m³/h | ≈24m³/h | ≈20m³/h | ≈10m³/h | ≈8m³/h | ≈4m³/h | ||
| QLD353 | ≈180kg/h | ≈300kg/h | ≈90m³/h | ≈36m³/h | ≈30m³/h | ≈15m³/h | ≈12m³/h | ≈6m³/h | ||
*DS Standard Capacity=Sludge flow*Sludge Consistency(DS refers to Dried Sludge)
Specifications
| Model | Screw Axis Specification | Outlet Position(ground distance)(mm) | Dimensions(mm) | Net weight | Operating Weight | |||
| Length | Wide | Height | ||||||
| QLD101 | Ø100×1 | 215 | 1816 | 756 | 1040 | 190kg | 280kg | |
| QLD131 | Ø130×1 | 215 | 1816 | 756 | 1040 | 220kg | 320kg | |
| QLD132 | Ø130×2 | 215 | 1816 | 856 | 1040 | 300kg | 410kg | |
| QLD201 | Ø200×1 | 350 | 2300 | 785 | 1270 | 375kg | 520kg | |
| QLD202 | Ø200×2 | 350 | 2500 | 935 | 1270 | 470kg | 680kg | |
| QLD301 | Ø300×1 | 495 | 3255 | 985 | 1600 | 820kg | 1230kg | |
| QLD302 | Ø300×2 | 495 | 3455 | 1295 | 1600 | 1350kg | 2050kg | |
| QLD303 | Ø300×3 | 495 | 3605 | 1690 | 1600 | 1820kg | 2810kg | |
| QLD304 | Ø300×4 | 495 | 3605 | 2150 | 1600 | 2350kg | 3750kg | |
| QLD352 | Ø350×2 | 585 | 4140 | 1550 | 2250 | 2450kg | 3400kg | |
| QLD353 | Ø350×3 | 585 | 4420 | 2110 | 2250 | 3350kg | 4850kg | |
*Note:Shanghai QILEE has the right to revise the specification.
Operation Conditions
| Model | Power Consumption(kw) | Water Pressure for Cleaning | Water Demand for Cleaning(L/h) | Maintenance Period | Replace Period for Wearing Parts(year) | ||||||||
| Screw Axis | Agiator | Total | Screw Axis | Moving Ring | |||||||||
| QLD101 | 0.1 | 0.1 | 0.2 | 01Kpa-0.2Kpa | 24 | 5min/day | Motorcycle Parts Motorcycle parts are high precision components that often made of steel, aluminum, brass or other kinds of material. MSG has an experience machining team offering professional CNC motorcycle parts service. We`re capable of creating any complex motorcycle parts for our customers. Motorcycle Parts,Motorcycle Parts And Accessories,Oem Motorcycle Part,Custom Motorcycle Part Huiye Hardware & Electrical Equipment Company Ltd. , https://www.huiyehardware.com | ||||||