Electrostatic spray is to use solid powder solvent instead of the liquid form, the high voltage makes powder coating negatively charged, With the help of electrostatic attraction, it is adsorbed on the surface of the workpiece to be coated, it is the coating method obtained after being heated and melted (or cured). Electrostatic spray is a new technology, what the powder coating we used does not contain a solvent and a dispersion medium and other liquid ingredients, when we use it, there is no need of dilution and adjusting the viscosity, itself can not flow, after melting it can flow, it will not like a liquid coating adhered to the surface of the workpiece. Therefore, electrostatic spray coating has the features of high efficiency, excellent film properties, solvent evaporation, little environmental pollution, energy consumption less, simple process, short production cycle, low cost, easy to paint automation etc..
FIPFG coating process can be directly coating the surface of the electrostatic spray products, to be closely integrated with the coating surface with a high degree of protection, good adhesion, anti-aging performance advantages. However, if the powder contains a small amount of PTFE and wax wrinkle agent, it will significantly affect the adhesion of the strip, therefore, we should pay close attention. At present, the technology has been widely used by the electrical industry.http://
Warp Knitting Machine Accessories
Warp Knitting Machine accessories are parts that are used to enhance the functionality of warp knitting machine. These accessories are designed to enhance the performance of the machine and improve the quality of the knitted fabric.
1. Camera Detection: This accessory is used to detect any defects in the knitted fabric. It is a high-tech system that uses cameras to scan the fabric and identify any flaws or defects. The system can detect holes, dropped stitches, and other defects, which helps the operator to take corrective action immediately.
2. Laser Stop: This accessory is used to stop the machine automatically when a defect is detected. The laser stop system is linked to the camera detection system, and it can stop the machine at the exact point where the defect occurred. This helps to minimize waste and reduce downtime.
3. Knotting Machine: This accessory is used to tie the yarn ends together when changing colors or when a yarn break occurs. The knotting machine is an automated system that ties the yarn ends together quickly and efficiently, without interrupting the knitting process.
4. Conversion: This accessory is used to convert the warp knitting machine from one gauge to another. The conversion system includes different types of needles, sinkers, and guide bars, which can be easily changed to adjust the gauge of the machine.
5. Waste Yarn Spooler: This accessory is used to collect the waste yarn that is generated during the knitting process. The waste yarn spooler collects the yarn and winds it onto a spool, which can be easily removed and disposed of.
Overall, these accessories are essential components of a warp knitting machine, and they help to improve the efficiency and productivity of the machine. They also help to ensure that the quality of the knitted fabric is consistent and of high quality. We are the professional warp knitting machine manufacturer located in China, welcome to consult us.
Warp Knitting Machine Accessories
suzhou cotex international Co.,Ltd , https://www.cotexmill.com