Our country's system of production, learning, research, and other organic linkage systems and policies do not have a constitution, and the rate of change in the effect of innovation is low, and the use of technology is poor. The operation mechanism of Chinese enterprises cannot fully comply with the requirements of the market economy. In the process of development, a number of key state-funded enterprises faced the serious situation of aging products and technical personnel. After restructuring, although there was improvement in production and operations, it was still not enough for science and technology to be different; Efforts are being made to become a new bright spot for companies that have different mechanisms and operations. However, most enterprises are small and medium-sized enterprises. Their plans are small, and most of them have not yet been able to grasp the advanced technology of their predecessors. Compete with big foreign companies.
The instrumentation industry has many types and small batches, and it requires long-term, consistent input. In the early stages of reform and opening up, the instrumentation industry had a wide gap with foreign countries, and companies pursued technology from the outset. Although there have been some changes in the near future, there are also companies that are exposed, but overall, the company's independent technological effect is not much better than the use of the company. Big business grows hard. Most of the enterprises are small and medium-sized enterprises. Their plans are small, and most of them have not yet been able to grasp the advanced technologies of their predecessors. They have little effect on innovation and cannot compete with large foreign companies.
There are several reasons for forming the gap between China's instrumentation products and foreign countries. The scientific research institutions in China have achieved a lot of research results in the measurement and control technologies and related instruments, but their applicability is poor. Regarding the relevant manufacturing technology, the depth and intensity of the research on the special center technology are insufficient, and the tasks for the secondary development are very large.
Instrument science and technology do not only cover the limited disciplines, but they can design, manufacture and produce first-rate birthrights as soon as they discover, apply, and integrate new technologies, new concepts, new technologies, new materials, and new technologies, and other new technological effects. Measure control and instrumentation products. The conversion rate of the effect is low. The high-middle-range instrument products and systems reach a certain depth in the use of technology, foreign companies have a professional part and have experienced the use of talent, and China's instrumentation companies are often unfamiliar with large-scale engineering processes, the lack of integration of the use of technology .
However, the current national investment roads are fragmented and it is difficult to focus on the focus. Businesses can neither be as competitive as foreign companies are in full compliance with market economic rules, nor are they investing in capital strategies. Also, the market conditions required for the marketization of new technologies are not yet perfect. Therefore, it is particularly hard to produce high-end products.
Second, the country lacks a strong system of research assistance. The instrumentation industry has many types and small batches, and it requires long-term, consistent input. The lack of talent has naturally affected the development of the industry. This is undoubtedly the main reason for the gap between domestic instrumentation and imported products. Because the system system mechanism has not been straightened out, the natural instrumentation industry in our country lacks highly organized compound talents and lacks comprehensive talents who are familiar with and interspersed with various disciplines.
The instrumentation industry has many types and small batches, and it requires long-term, consistent input. In the early stages of reform and opening up, the instrumentation industry had a wide gap with foreign countries, and companies pursued technology from the outset. Although there have been some changes in the near future, there are also companies that are exposed, but overall, the company's independent technological effect is not much better than the use of the company. Big business grows hard. Most of the enterprises are small and medium-sized enterprises. Their plans are small, and most of them have not yet been able to grasp the advanced technologies of their predecessors. They have little effect on innovation and cannot compete with large foreign companies.
There are several reasons for forming the gap between China's instrumentation products and foreign countries. The scientific research institutions in China have achieved a lot of research results in the measurement and control technologies and related instruments, but their applicability is poor. Regarding the relevant manufacturing technology, the depth and intensity of the research on the special center technology are insufficient, and the tasks for the secondary development are very large.
Instrument science and technology do not only cover the limited disciplines, but they can design, manufacture and produce first-rate birthrights as soon as they discover, apply, and integrate new technologies, new concepts, new technologies, new materials, and new technologies, and other new technological effects. Measure control and instrumentation products. The conversion rate of the effect is low. The high-middle-range instrument products and systems reach a certain depth in the use of technology, foreign companies have a professional part and have experienced the use of talent, and China's instrumentation companies are often unfamiliar with large-scale engineering processes, the lack of integration of the use of technology .
However, the current national investment roads are fragmented and it is difficult to focus on the focus. Businesses can neither be as competitive as foreign companies are in full compliance with market economic rules, nor are they investing in capital strategies. Also, the market conditions required for the marketization of new technologies are not yet perfect. Therefore, it is particularly hard to produce high-end products.
Second, the country lacks a strong system of research assistance. The instrumentation industry has many types and small batches, and it requires long-term, consistent input. The lack of talent has naturally affected the development of the industry. This is undoubtedly the main reason for the gap between domestic instrumentation and imported products. Because the system system mechanism has not been straightened out, the natural instrumentation industry in our country lacks highly organized compound talents and lacks comprehensive talents who are familiar with and interspersed with various disciplines.
Tin Can Lid,Tin Can Ring,Paint Can Lid,Tin Cans With Lids
Zhoushan Golden Pard Machinery Co., Ltd.  , https://www.goldenpardmachines.com