Lower Labor Cost Aluminum Extrusion Machine in Billet Heating Furnace

1)The Tonnage of the extrusion press:1800 ton
2)Size:178-6000
3)Fuel:Natural gas
Natural gas pressure: 20000-30000Pa; Max gas consumption: 65m³/h;
4)power producer:  
            A,380V AC:
            B,air compressor producer: pressure 0.6MPa .natural gas:3m³/h
            C.circulating cooling water: pressure 0.4Mpa. Water: 4m³/h
II. Technology Parameters:                                                        
1. Production capacity:  1500Kg/h
2. Heating temperature:   0-550ºC
3. Store billets number:8
4. Original heating time: 2.5-3h
5. Billet shear length: 300-900mm (adjustable)
6. Shear length precision: ±1mm
7. Section deformation precision: ±3mm
8. Process production index: gas 28 M³/ton. Profile (Condition: Natural gas calorific value no less than 8500 Kcal, the monthly capacity will not lower than 550T, the yield profile not lower than 80% )
9. Total power: 43 KW
10. Circulating fan power: 7.5 KW
11. Hydraulic pressure: rated pressure: 16Mpa
Independent hydraulic station: 15KW
12. Operation mode: PLC, touch screen
13. Temperature control system:3 groups temperature controller show furnace temperature. High temperature protection, thermal cycle air blower let.
14,pre-cut billet minimum length: 4m
15,straightness tolerance of log:± 10mm
16,Max. Temperature:550°C
17,Furnace length: 7m

18,burner quantity: 1
Materials configuration:  
 

Brass & Aluminum Machining Parts

Junfeng Machinery Co., Ltd. , http://www.qddiecasting.com