Mine cable blasting?

In the course of operation of wires and cables, such accidents often occur, especially when non-standard wires and cables are used. When the cable is in operation, when two-phase (and multi-phase) grounding or phase-to-phase short-circuit faults occur, the system is mostly tripped. This kind of failure phenomenon is commonly referred to as shot blasting. Now let's just say, what are the main factors that cause the "cable blasting"?
1. Short-circuit faults between the three-phase cores inside the cable, or one of the short-circuit faults on the outer jacket of the cable, will generate very large heat, causing the fault to burst. 2. For example, particles, impurities, bubbles or the like in the insulating layer, or external mechanical damage. 3, check the cable is bent too much to give the cable to hurt. 4. The bending radius is too small, mechanical external damage, DC resistance test ion release, rated current overload.
The cable blasting occurs during operation and causes a sudden trip of the system, which is extremely detrimental to production. We believe that if there are frequent shot-blasting failures in the cable system, it indicates that there are major problems in the construction, operation, maintenance, and management of the cable lines, and sufficient attention should be paid. After the repair work is completed, the cause must be carefully searched and eliminated. Avoid recurring shots.

Anatase Titanium Dioxide

It is a white inorganic pigment with non-toxic, best opacity, best whiteness and brightness, and is considered to be the best white pigment in the world today. Titanium white has strong adhesion, is not easy to change chemically, and is always white. Widely used in coatings, plastics, papermaking, printing inks, chemical fiber, rubber, cosmetics and other industries. It has a high melting point, and is also used to make refractory glass, glaze, enamel, clay, high temperature resistant laboratory utensils, etc.

Anatase titanium dioxide belongs to pigment grade titanium dioxide, which has the characteristics of strong hiding power, high coloring power, and good weather resistance. Mainly used in industrial sectors such as rubber, plastics, papermaking, printing inks, coatings and chemical fibers.

The use of anatase titanium dioxide mainly has the following aspects: Titanium dioxide for papermaking generally uses anatase titanium dioxide without surface treatment, which can play the role of fluorescence and whitening, and increase the whiteness of paper. The titanium dioxide used in the ink industry has rutile type and anatase type. It is an indispensable white pigment in advanced inks. The titanium dioxide used in the textile and chemical fiber industries is mainly used as a matting agent. Since the anatase type is softer than the gold red type, the anatase type is generally used. Titanium dioxide is not only used as a coloring agent in the rubber industry, but also has reinforcing, anti-aging, and filling functions, and is generally based on anatase.

Anatase Titanium Dioxide,Titanium Dioxide Anatase,Anatase Titanium Dioxide For Rubber,Anatase Titanium Dioxide Powder

Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com