To achieve serial communication between a computer and a CNC machine tool, two conditions must be met: the machine tool provides a working mode and a serial interface such as appropriate communication software. With these two conditions, we can realize the serial communication between the CNC machine and the computer through the following steps. The production of the communication line is different according to the interface form provided by the numerical control machine equipped with the numerical control system and the machine tool, and the connection method of the communication line is also different. The description is given by taking a numerical control vertical milling machine as an example. (System, provide a way as shown in the table. Communication software and parameters set to small and medium-sized software produced by American companies, due to its perfect function and convenient use, it has been widely used in China in recent years. We choose the application in the software as communication. Software. Inputs commonly used for larger programs are often used for input and editing of shorter programs. Modifications are often used for input of larger programs. For the production of various programs and machine system parameters, the materials are used in the process of finishing the workpiece. Whether it is drum polishing, vibrating machine or eddy-flow finishing machine polishing, it is inseparable from abrasive. When the workpiece and the abrasive contact, it will naturally form an angle between the two. We have found in the survey that many manufacturers are During the polishing process, due to the poor processing of the workpiece and the abrasive angle, the workpiece does not reach perfect quality and affects the production efficiency. In fact, it is not very difficult to grasp the angle of the workpiece and the abrasive. When the operator touches the workpiece, it will To produce a visual angle, the abrasive specifications should be selected from a variety of angles of the workpiece itself, depending on the processing requirements. Serious thinking, repeated correction of the angle, can make the contact point between the workpiece and the abrasive more correct. Secondly, usually study more in the work, strict requirements on the quality of the process, excellence, must be familiar with the skill, can be inferior when encountering difficult problems It will be integrated.
Hydraulic Breaker Cylinder,Hydraulic Hammer Spare Parts,Parts Of A Hydraulic Brake System,Hydraulic Breaker Parts Name
Yantai Tianbing Construction Machinery Co., Ltd , https://www.tbbreaker.com