Model NO.: SH-CS
Material: Galvanized Steel Sheet
Material Thickness: 1.5-2.5mm
Power Supply: 380V, 50Hz, 3phase
Forming Speed: 5m/Min
Roller Material: Gcr15
Machine Weight: About 7 Tons
Roll Station: About 13 Station
Drive System: 1.2 Inch Chain Drive
Control System: PLC with Touch Screen
Machine Size: About 4.5mx0.8mx0.5m
Trademark: Suhang
Transport Package: Standard Package with Film, Plastic and Steel Wire
Specification: 4.5m*0.8m*0.5m
Origin: Wuxi, Jiangsu
HS Code: 8455229090
                   Solar Strut Roll Forming MachineÂ
 1. Technical Parameter
Â
1. Forming thickness: 1.0-2.5mm,galvanized steel sheet yield strength≤G250MPa
2. product line speed: 14M/min(not include cutting and punching stop time)
3. Hydraulic punching device: 1 set
4. rolling stations : about 13 stations
5. levelling device: 7 roller levelling,.3 top rollers and 4 bottom rollers
6. material of roller: bearing steel, quenching treatment.
7. material of main shaft: 45# fine steel,
8. diameter of main axis: 75mm
9. main motor power: 7.5kW
10. motor power of hydraulic station: 4KW
11. hydraulic station pressure: 12MPa
12. electric control system: whole line adopted Panasonic PLC controlÂ
13. cutting type: hydraulic drive, cut after formingÂ
14. material of cutting blade: Cr12 , quenching process
Â
 2. Main Components
Â
Serial No. |
Commodity & Description |
Quantity |
1 |
5T manual uncoiler |
1 set |
2 |
Leveing  guiding |
1 set |
3 |
Servo feeding device |
1 set |
4 |
Main roll forming machine |
1 set |
5 |
Punching Device |
1 set |
6 |
Cutting device |
1 set |
7 |
Finished products tabel |
1 set |
8 |
PLC control system |
1 set |
9 |
Out tables |
1 set |
10 |
Spare parts | 1 set |
 3. Working Flow of Roll Forming Machine
Â
 Uncoiling-Feeding&Leveling--Punching Device---Roll forming-Cutting-Products collecting
A. Passive Decoiler..........................................................To load and uncoiling material
(We also have Electric Decoiler and Hydraulic Decoiler to hold the heavy material.)
B. Servo Feeding Applicator............................................To feed the material accurately
C. Hydraulic/Press Punching...........................................To punch as requirements
D. Roll Forming Unit.........................................................To roll form as requirements
E. Hydraulic Cutting.........................................................To cut sheets as desired length
(We also have non-stop hydraulic cutting system.)
F. Output Table................................................................Support the finished products
Â
4. Advantage for  Roll Forming Machine
1. Reasonable Price
2. High Quality
3. 12 Months Warranty
4. More Than 10 Years Experience
5. Durable
6. Afrer-sales serviceÂ
Â
Â
5. Â After-sale Serive:
  - The seller take responsibility to installation and commissioning of the equipment and free training. After machine arrive the destination, by the request of the buyer , the seller will provide 1 technical engineer to guide installation and training , and the buyer should give the technical person with full cooperated.
  - Installation period: about 5 days after the complete preparation by the buyer such as the foundation and all necessary accessories.
 - Training time: 5 days.
 - Before departure of the engineers from seller, the buyer should pay for installation and commissioning fee 100$/day to the point account of the seller. The two-way ticket,visa, food, hotel , the translator and insurance are all should provide by buyer with full responsibility.
 -The seller supply technical data (including forming mould drawing, electrical elements drawing and equipment drawing etc.)
6. Â Company Profile
  Wuxi Suhang Machinery manufacturing Co., Ltd. is specialized in building materials of light steel structure. Since the factory founded 10 years before, it always designs and produces various type profile
of roll forming machine.
   The main products of factory is Roller shutter door, PU sandwish panel line, pre-painted steel forming machine, Racking roll forming machine, the cable tray roll forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down
Pipe forming machine, the whole carriage plate for car beam unit, Steel storage unit, etc. The products
are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas and other
construction projects, Â Our factory can meet the construction enterprises, automobile industry, Iron and
steel production enterprises' growing demands.
    Suhang machinery is located in Wuxi city, Jiangsu province which is close to Shanghai,  It's about half an hour's journey. We enojoy the convenient transportation and advantageous location which supply good business opportunities for the buyers home and abroad.
7. Â FAQ
Â
1). Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
Besides, the width is adjustable.
Â
2). Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
Â
3). How to visit your company?
Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Wuxi Station (30 minutes), then we can pick up you.
Â
4). What can you do if the machine broken?
Our machines' warranty period is 12 months, if the broken parts can't repair, we will send the new parts replace the broken parts for free, but you need pay the express cost  If after warranty period, we can through negotiation to solve the problems, and we supply the technical support for the whole life of the machine.
Â
5). Can you be responsible for transport?
Yes, please tell me the destination port or address. we have rich experience in transportation.
Â
6). You are trade company or factory?
We are factories.
Â
7). Why your price is higher than others?
As we persist on that factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem.Â
Â
8). How long the machine could be made?
Normally speaking, deck floor roll forming machine could be made about 60 working days. If you need machines in a hurry, we can try it short time.
Computerized Quilting Embroidery Machine
Computerized Quilting Embroidery Machine,Computerized Quilting Machine,Computerized Quilting Systems,Computerized Quilting Machine Software
Weaving Machine,Quilting Machine Co., Ltd. , http://www.nbquiltingmachine.com