ã€cause of issue】
(1) Loose foundation bolts or imperfect installation;
(2) pump and motor installation is not the same heart;
(3) into the air or cavitation;
(4) pump bearing damage or wear;
(5) outlet pipe to retain air;
Exclusion
(1) tighten the bolt, improve the basic installation;
(2) Correction of concentricity;
(3) to find out the reasons for entering the air and take appropriate measures to eliminate the occurrence of cavitation will reduce the height of suction to reduce the head loss of suction pipe;
(4) replacement or repair of bearings;
(5) At the remaining air, install exhaust facilities;
Pump operation in the motor overload process as follows:
ã€cause of issue】
(1) speed is too high;
(2) pump flow is too large;
(3) foreign body into the pump;
(4) motor or pump mechanical loss is too large;
Exclusion
(1) Check whether the motor matching;
(2) off the small water gate;
(3) removal of foreign matter removal pump;
(4) Check? Counseling? Extraordinary block bell radon every invasion? 湎 湎 ??? Manganese ç› shrimp? ⑺? Captain ⑺? Mi å²¢ owed???? / Span>
Expansion joints reduce vibration, dampen sound, and accommodate movement in piping systems.
There are two primary types of expansion joints-metal and non-metallic or elastomeric. Metal expansion joints are constructed in a bellows configuration from thin-gauge material designed to absorb mechanical and thermal movement. Elastomeric expansion joints, by contrast, are fabricated from natural or synthetic rubber and fabric. Consisting of an inner elastomeric tube fused to a metal-reinforced fabric body and an elastomeric cover, these types of expansion joints accommodate greater pipe movement and provide more abrasion resistance than metal joints.
Rubber Expansion Joint,Power Plant Expansion ,Expansion Joint Tube,Boiler Fabric Expansion Joint
Jinan Yuanda Power Equipment Co.,Ltd. , https://www.ydboilerpart.com