In recent years, frequent accidents have caused people to pay more and more attention to traffic safety. As the saying goes, the car accident is fiercer than tigers. According to relevant statistics, the accident rate of rainy weather is about five times higher than usual. So what causes this phenomenon to happen?
First, the rainy weather will cause the driver's sight to be affected to a great extent, especially in the case of heavy rain.
Second, in the rainy weather, the road is slippery. Wiping is very easy between vehicles and vehicles.
Third, under heavy rain conditions, it will cause different degrees of stagnant water. The accumulation of stagnant water will not only cause traffic jams, but will also increase the difficulty of driving. If stagnant water causes the vehicle to stall, it will also cause serious damage to the vehicle.
What security guidelines are there for reference?
First, the most important thing for wading is to lower the speed. It is best to hang the lowest gear. Because if the speed is too fast, affecting the back of the vehicle is a factor. On the other hand, because splashes of fast-speed splashes must be higher than the normal water level, it is very likely that water will enter the engine through the exhaust pipe, and extinguishment will cause secondary congestion. Therefore, in the process of wading, we must slow down.
Second, the choice of wading routes is also crucial. There are two skills: First, you can choose to follow the trajectory of the previous vehicle. Second, if there is no vehicle in front of you, then you need to choose your own route, try to choose places with high ground, such as slopes and other places. In this way, the possibility of flooding can be reduced to some extent.
Third, keep a distance from the cart. The height of the vehicle's chassis is generally not flooded, but when the cart passes, it will change the height of the water level. When the cart passes, it will cause large waves, which will have a great impact on the water.
Fourth, we must check the license plate after wading to prevent the license plate from being washed away by water.
Fifth, the engine speed is kept as high as possible.
Corrosion Resistant Submerged Pump
Corrosion-resistant submerged pumps rely on atmospheric pressure to raise the water level. With the movement of the piston, an approximate vacuum is created, and the water is forced up by the external atmospheric pressure. In principle, it can be divided into pneumatic pump, Centrifugal Pump, axial flow pump, mixed flow pump, screw pump and so on.
Corrosion Resistant Submerged Pump,Submerged Pump,Submerged Water Pump,Submersible Centrifugal Pump
Jiangsu Qiantu Trading Co., Ltd. , https://www.jsqiantupump.com