Road sweeper as one of the sanitation equipment. It can be widely used in road highways, municipal and airport pavements, urban residential areas, and parks. Pavement sweepers not only clean trash, but also dust and purify the air medium on the road, which not only ensures the appearance of the road, maintains the sanitation of the environment, but also maintains the good working conditions of the road surface and reduces and prevents traffic accidents. The occurrence and further extend the life of the road. It has become a trend to use pavement sweepers for road maintenance in China.
The road sweeper is a special sanitation vehicle equipped with a sweeping brush and other cleaning systems, and is mainly used for sweeping operations in large and medium-sized urban sanitation departments. Road sweepers have greatly liberated the work intensity of sanitation workers, increased work efficiency, and reduced secondary pollution such as dust.
Instructions for use:
One: Cleaning work
1 Turn on the power of the control box and point the control valve to the secondary valve position
2 Start the auxiliary machine
3 Turn the slave clutch control button to the closed position and the fan starts to work
4 Point the vacuum box control to a lowered position
5 Point the left or right control to the down position
6 Turn the left or right rotary control to the forward position (count clockwise in the left and counterclockwise in the right)
7 Point the left spray, right spray, and rear spray water control knobs to the open position
8 Point the pump control knob to the open position
9 The vehicle is driving at an appropriate speed and starts cleaning
Two: Cleaning is over
1 Vehicle stops driving
2 Point the Pump Control, Left Spray Control, Right Spray Control, Rear Spray Control to Off Position
3 Point the broom control to the middle
4 Point the swash plate control to the ascending position and then to the middle position
5 Point the vacuum box control up and then on the middle
6 Point the secondary engine clutch control knob to the sub-position and then to the middle position
7 Point the control valve control button to the middle position
8 Shutdown the secondary engine
9 Power off the control box
Three: Unloading garbage
1 Turn on the power of the control box and point the control valve control valve to the main valve position
2 Start the vehicle's main engine
3 Depress the vehicle clutch
4 Open the vehicle's additional oil pump clutch switch (pull outward)
5 Loosen the vehicle clutch at an appropriate speed
6 Point the rear door control knob on the control box to the open position, and then to the middle position after 5 seconds
7 Point the car control button to the up position, and point the control button to the middle position at any time according to the inclination of the car. At this time, the car tilts up and stops.
8 Garbage Cleaning
9 After the garbage has been cleaned, point the control box to the lowered position. After the carriage fully returns, position the control button at the middle position.
10 Point the rear door control to the off position, and then to the middle position after 10 seconds
11 Clean up the end of rubbish
12 Depress the vehicle clutch
13 Close the additional pump clutch control knob (pull inwards)
14 Loosen the vehicle clutch at an appropriate speed
15 Point the control valve of the control box to the middle position
16 Switch off the control box
Cheng Li Special Purpose Vehicle Co., Ltd. specializes in production and sales: cleaning and sewer trucks, road sweepers, sprinklers, dust suppression vehicles, garbage trucks, sewage suction trucks, vacuum cleaners, suction trucks, high pressure cleaning trucks, aerial vehicles, etc. Models and accessories. We welcome all new and old customers to visit the company to inspect the production strength and product technology. We will serve you wholeheartedly. No matter what the requirements, there is always one for you. Cheng Li company official website:
Aluminum High Speed Door Parts
SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsrud.com