Because the salt spray tester has long been tested for salt spray aging, the environment is prone to cause the salt spray test machine to have large and small faults. In order to solve the fault quickly, the salt spray aging test will continue smoothly. Some common faults are described below. Approach.
Saturated barrel temperature cannot rise to the set temperature
cause of issue:
1. The temperature of the saturated barrel temperature controller is too low;
2. The saturated barrel safety protection switch setting is too low;
3. Heating system failure;
4. Electromagnetic relay failure;
5. Controller failure.
Approach:
1. Set the temperature controller to the desired temperature;
2. Set the safety switch to the desired temperature;
Insufficient fog
cause of issue:
1. The spray regulator is placed too low;
2. The glass filter in the preheating tank is blocked;
3. The pressure setting is too low.
Approach:
1. Raise the spray regulator;
2. Clean the glass filter;
3. Adjust the pressure regulating valve to a pressure of 1Kg per square centimeter. The air compressor is marked with a pressure regulating valve and adjusted to a pressure of 2Kg per square centimeter.
Inadequate water level
Cause: The water level is too low.
Treatment: Check if the test chamber or saturated tank is adequately water level.
Air compressor
The cause of the malfunction: The air compressor itself has a self-protection function.
Treatment: Use as usual without affecting the test process.
Unable to spray
cause of issue:
1. The air compressor is not running;
2. The main switch of the air compressor outlet is not open;
3. Solenoid valve failure;
4. The pressure gauge is faulty or the pressure is too low;
5. Electromagnetic contactor failure;
Nozzle blockage
Approach:
1. Turn on the air compressor button;
2. Turn on the air compressor main switch;
3. Remove the nozzle and clean it (please disassemble it carefully).
Unable to operate
Cause of failure: When the water level in the heating tank is too low, the power supply will be cut off.
Treatment method: Add the water level of the heating tank to the normal condition.
thermostat
The cause of the malfunction: the temperature controller is faulty and the temperature sensing rod is faulty.
Treatment method: notify the maintenance company to repair the door.
Turntable Bearing is a large bearing that can bear large loads such as axial load, radial load and overturning moment at the same time. It integrates various functions such as support, rotation, transmission and fixing. In general, because of its mounting hole, lubrication and sealing device, can meet the different needs of various kinds of working conditions of the host; on the other hand, the turntable bearing has the advantages of compact structure, convenient installation and convenient rotary guide, easy maintenance and other characteristics, is widely used in hoisting and conveying machinery mining, machine, construction machinery, port machinery, wind power generation, medical equipment, radar and missile launchers and other large rotary device.
Turntable bearings are usually composed of four parts, such as inner ring, outer ring, rolling body, isolation block and so on. As the core components are revolving support, the axial force and radial force can be supported at the same time. There are many forms, but the composition of the structure is basically the same.
Turntable bearings are usually composed of four parts, such as inner ring, outer ring, rolling body, isolation block and so on. As the core components are revolving support, the axial force and radial force can be supported at the same time. There are many forms, but the composition of the structure is basically the same.
01 series of turntable bearings
The single row four point contact ball turntable bearing consists of four parts: inner ring, outer ring, steel ball and isolation block. It has compact structure, light weight, four point contact between steel ball and arc raceway, and it can bear axial force and radial force at the same time. The rotary conveyer, the welding machine, the small and medium crane and the excavator can be selected.
02 series of turntable bearings
The double volleyball turntable bearing has three seat rings. The steel ball and the isolating block can be directly discharged into the upper and lower raceway. According to the force condition, the upper and lower two rows of steel balls with different diameters are arranged. This open assembly is very convenient, upper and lower arc raceway bearing angle is 90 degrees, can bear large axial force and overturning moment. When the radial force is more than 0.1 times the axial force, the raceway must be specially designed. The axial and radial dimensions of the double row different diameter ball bearings are large and the structure is fastened. It is especially suitable for the loading and unloading machinery of the tower cranes, car cranes, etc., which require the diameter of the medium or above.
Single row Cross Roller Bearing
Single row Cross Roller Slewing Bearing, consisting of two seats, compact structure, light weight, high manufacturing precision, assembly gap is small, the installation of high precision roller for 1:1 cross arrangement, can withstand the axial force, overturning moment and large radial force, is widely used in hoisting and transportation. Engineering machinery and military products.
Three row Roller Bearing
The three row roller bearing has three seat rings, the upper and lower and the radial raceways separate separately, so that the load of each row of roller can be determined exactly. At the same time can withstand all kinds of load bearing capacity of four kinds of products in one of the largest, the axial and radial dimensions are larger, firm structure, especially suitable for heavy machinery with larger diameter, such as bucket wheel excavators, wheeled crane, crane, port crane, steel water table and large tonnage truck cranes.
Light series turntable bearing
The light turntable bearing has the same structural form as the ordinary rotary bearing. It is light in weight and flexible in rotation. It is widely used in the fields of food machinery, filling machinery, environmental protection machinery and so on.
HS series turntable bearing
The single row four point contact ball bearing is composed of two seat rings, and the structure is compact, and the steel ball is in contact with the circular arc raceway at four points. It is mainly used for truck cranes, tower cranes, excavators, piling machines, engineering operation vehicles, radar scanning equipment and so on.
HJ series turntable bearing
Single row cross roller Slewing Bearing, consisting of two seats, compact structure, high manufacturing precision, assembly gap is small, the installation of high precision roller for 1:1 cross arrangement, can withstand the axial force, overturning moment and large radial force, which is widely used in transportation, engineering machinery and military product.
Other series of turntable bearings
Single row four point contact ball bearing (QU, QW, QN Series)
Four point contact disc bearing (VL Series)
Four point contact disc bearing (VS Series)
Four point contact disc bearing (V Series)
Single row cross roller bearing (XS Series)
Single row cross roller bearing (X Series)
Turntable Bearing
Turntable Bearing,Slewing Bearing,Slewing Ring Bearing,Ball Bearing Turntable
LUOYANG AUTO BEARING CO.,LTD , https://www.lyautobearing.com