Although the roads in the country are widely connected, traffic jams also occur from time to time. Especially when commuting, you often see endless cars lined up in a row, that momentum is definitely not spectacular. Traffic jams are an extremely annoying thing for many people and are even more annoying for car owners. The car was stuck on the way, not only delaying the time but also wasting the oil. According to statistics, in the case of parking at idle speed, it is equivalent to driving 1 km every 3 minutes. Calculated with an average fuel consumption of 8 liters per 100 kilometers per vehicle, the parking fuel consumption is 0.08 liters per 3 minutes. It's certainly a particular distress for the oil to be wasted. In fact, as long as you learn this trick, you can also save fuel when you are stuck in traffic.
First, open the window as much as possible when driving at high speed, you can open more windows when driving at low speed
When traveling at a low speed on a congested road, the air flow when the vehicles on both sides run will create resistance to your car. Opening the window can reduce air resistance. This will save you more fuel.
Second, air pressure on the accelerator and quick start may also waste a lot of oil.
Some drivers always brake, start and brake. As everyone knows, this will not only make passengers uncomfortable, but also very fuel-efficient. The general rapid start fuel consumption is about 10 ml. Empty step on the throttle once about 6 milliliters of fuel consumption, so spent, do not know how much oil to pay!
Third, keep a certain distance from the vehicle ahead
When driving on the road, try to maintain a large distance from the vehicle in front so that you can avoid stepping on the accelerator and the brakes. Less braking, the car's fuel consumption will decline.
Four, within 1 minute of traffic jams do not turn off
Not all traffic jams need to be turned off. It's best to turn off the engine for a long time. You can do this within 1 minute: Manually blocked cars: Hang up to neutral, pull up the handbrake; Automatic cars: Dispense into the N-stop, pull Hand brake.
Editor's Note: When a car is stuck on the road, don't be anxious and wait patiently. Driving according to the actual situation is fuel-efficient.
Seamless Pipe (and tubing) is made by extruding a steel block or by drilling a solid steel bar. Next, the extrusion or the drilled steel bar is cold drawn through a dye to achieve the diameter and thickness needed. Because this process can cause mechanical hardening, sometimes the material is annealed and straightened as a final process. Seamless Pipe & Tubing is subdivided as:
Cold Drawn Seamless, or CDS, exhibits precise tolerances and a good surface finish.
Hot Finished Seamless, or HFS, has less critical tolerances and somewhat scaly finish and is not as strong as CDS.
Fluid Steel Pipe,Carbon Steel Pipe,Cold Drawn Seamless Steel Pipe,Food Grade Stainless Steel Pipe
SHANDONG HUITONG STEEL CO.,LTD , https://www.cnhuitongsteel.com