When the engine is working, the normal sound will be mixed with the abnormal sound. What's more, the model of the vehicle engine is various. However, as long as the engine is fully understood due to the different nature of the engine, familiar with the different sounds of different natures. The location, characteristics, timing and changing laws of the vocalization, attention to the accumulation of experience, or the accuracy, judgment and determination of the nature, location and cause of the abnormal sound.
1, the connecting rod big head bearing sound
The sound of the big-head bearing of the connecting rod caused by the sound of the big rod bearing of the motorcycle is usually caused by: poor connection between the connecting rod and the chain journal (using the sliding bearing), poor wear of the bearing (using the rolling bearing), poor lubrication, bearing bush When the welding is too tight and burnt, the operation is improper when the repair is performed, or the quality of the bearing bush is not good, the early wear and the bearing ball (column) wear, and the sound is generated when the engine is working.
Acoustic characteristics of the connecting rod big head bearing: the sound does not change with the engine temperature, and suddenly accelerates (from idle to medium speed), there is obvious continuous knocking sound (rolling bearing with internal noise of the engine), which is the main sound of the connecting rod big head bearing Characteristics: When the big-end bearing of the connecting rod is worn (loose), the engine will have obvious sound when it is idle, and the sound will increase when the load is increased. When the engine is broken, the sound will obviously weaken or disappear.
2. Valve spring knocking sound
The cause of the valve knocking sound is usually: the valve clearance is too large and the cam is worn, the profile curve is changed, the valve spring is broken, and when the engine is working, the broken valve springs collide with each other to produce an audible sound, and the valve spring knocking sound is a metal knocking sound. Continuous and messy, when the engine is broken, the knocking sound is almost unchanged. After the top-mounted valve spring is broken, there is a "dangdang" sound of the piston top colliding with the valve. When the side-mounted valve spring is broken, there is a "beep" sound, and the sound is knocked. The frequency increases with increasing engine speed, but the volume changes are not significant.
3, the piston knocks the sound of the cylinder
The reason why the sound of the piston knocking cylinder is usually that the clearance between the piston and the cylinder is too large. At the moment of the engine work, the piston is subjected to the pressure of the high pressure gas, swings in the cylinder and knocks on the cylinder wall to generate sound. In addition, the piston is reversed. Ellipse, connecting rod bending or twisting, piston pin and connecting rod copper sleeve (bearing) connecting rod big head bearing too tight, it will also cause the piston to knock the cylinder.
After the engine is broken, the knocking sound is weakened or even disappeared. When the engine is idling, the knocking sound is clear, and the knocking sound is obvious when the engine is cold. After the temperature rises, the knocking sound is weakened or even disappeared, and the spark plug hole is injected into the cylinder. A small amount (about 3mL) of engine lubricating oil, slowly stepping on the starting rod to drive the crankshaft to rotate for about 1 min, so that the lubricating oil flows into the piston and the cylinder. When the engine is working, the knocking sound is temporarily weakened or disappeared.
4, knocking caused by deflagration
When the engine suddenly accelerates or the motorcycle goes uphill, the cylinder internally emits a continuous sharp "click" sound, which is the knocking sound caused by the detonation. The knocking sound caused by the detonation is matched with the piston pin and the connecting rod small head bushing. The sound of the big voice is similar. However, the knocking sound caused by the detonation does not occur at the time of idling. When the pedal is not activated, the starting lever does not hear the sound; after starting, the sound of the piston pin is continuous and disordered, and the knocking sound caused by the deflagration increases the load and It is most obvious when going uphill, and the sound is crisper.
The causes of deflagration are: engine overheating, excessive carbon deposits in the combustion chamber, low spark plug heat value, low octane gasoline, and too early ignition time.
Motorcycle noise can also avoid part of it, as long as every car's friends are regularly maintained, and often check, the situation mentioned above will not appear on us so soon.
Stainless Steel Welded Wire Mesh
1. Durability: Stainless steel is renowned for its strength and durability. Welded wire mesh made from this material can withstand significant wear and tear over time.
2. Corrosion Resistance: The high chromium and nickel content in stainless steel makes it resistant to corrosion, even in harsh environments such as coastal areas or industrial settings with aggressive chemicals.
3. Versatility: It can be used in a wide range of applications including industrial, commercial, and residential projects. Its uses span from construction (e.g., fencing, reinforcement), agriculture (e.g., animal cages, plant protection), and environmental protection (e.g., erosion control).
4. Aesthetic Appeal: Available in different wire diameters and mesh sizes, it can be customized to suit aesthetic needs while maintaining structural integrity.
5. Ease of Installation: Due to its modular design, stainless steel welded wire mesh is relatively easy to install and can be adapted to various shapes and sizes.
Applications:
- Construction: Used in fencing, guardrails, and reinforcing concrete structures.
- Agriculture: Animal cages, chicken houses, and protective barriers for crops.
- Environmental Protection: Erosion control, sediment retention, and water management systems.
- Security: Perimeter fencing, security cages, and access control systems.
- Industrial: Conveyor belts, filtration systems, and storage solutions.
Stainless steel welded wire mesh requires minimal maintenance due to its inherent resistance to corrosion. Regular cleaning with mild soaps and water can help keep it looking good and functioning properly.
Stainless steel welded wire mesh offers a combination of durability, corrosion resistance, and versatility, making it an excellent choice for applications where reliability and longevity are crucial. Whether you're dealing with harsh environmental conditions, demanding industrial requirements, or aesthetic considerations, this material provides a robust solution.
Stainless Steel Welded Wire Mesh,Stainless Welded Steel Pipe,welded stainless steel pipe,Stainless Welded Mesh screen
Hebei Yingkang Wire Mesh Product Co.Ltd , https://www.wiremesh-china.com