1. Walls and wood joints are prone to cracks.
Handling Opinions: Combine with Neutral Sealant 2. Insulation walls are prone to cracks.
Disposal advice: Use cloth with good air permeability, such as nylon mesh cloth 3. Cracks are likely to occur at the joints of the construction channels in the construction process.
Processing advice: It is not easy to prevent, as long as the wall is destroyed, cracks are inevitable. Can be covered with decorations or re-processed.
the second year:
1. The crack on the surface of the wall can basically be controlled after being repaired, but it still appears locally.
2. After treatment, the thermal insulation wall will still appear cracks, but the chance of occurrence will be greatly reduced.
3. The kitchen faucet, bathroom faucet, etc. will loosen and seep. The water is prone to clogging, especially after the bathtub has been used for a long period of time. Hair and other debris will make it unobstructed.
Processing opinions: timely inspection, timely cleaning, timely maintenance for the third year:
1. Due to the sinking of the new building, the wall tiles are prone to glazed side breaks and fall offs.
There are several reasons for the loss of wall tiles: (1) There is a problem with the original foundation treatment. If the wall is not pulled, set of pulp.
(2) The cement label fails to meet the requirements and the corresponding adhesive (interface agent) is not added during construction.
(3) Workers did not soak bricks as required.
2. Wood products are prone to problems.
Such as doors, furniture, etc. in the use of hardware connectors are loose or the customer in the decoration of the purchase of poor hardware caused by falling and other issues.
Vertical Double Slide Injection Molding Machine
Price of small vertical injection molding machine_ Price function characteristics of sliding plate Vertical Injection Molding Machine
1. Vertical mold closing, horizontal injection;
2. Special material pipe and screw group for wet pellet BMC thermosetting injection molding;
3. The special hydraulic feeding device is located on the injection cylinder and is directly connected with the feed inlet of the material pipe to ensure that the material barrel will not be deformed due to the loading force;
4. The special sandwich template design, including heat-cut cold water plate+heat-insulated fiberglass plate, ensures the machine life, stability problems and unnecessary energy waste caused by mold heat transfer;
5. Four-post BMC sliding plate Injection Molding Machine, single sliding mold, allows the machine to complete a cycle action. After the mold is closed, the lower mold automatically slides to the front of the operator, which is more convenient for operation, high safety and finished product ejection is also completed externally
Vertical Double Slide Injection Molding Machine ,Multiplas Vertical Injection Moulding Machine,Pvc Vertical Injection Moulding Machine,Used Vertical Injection Moulding Machine
Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com