Many people will encounter a situation: Why is the output of 100 megabit fiber passing through the router only a dozen or so? Now Xiaobian will introduce the reason.
There are many reasons, such as at the public network level:
1. The server-side export bandwidth that provides you with download or transport services is insufficient or has traffic policies, such as allowing traffic bursts for an initial period of time.
2. The isp that provides network access services for you will have similar strategies. For example, it will ensure that enterprise-level or important user traffic will go first. Ordinary user traffic will be randomly or tail-discarded (qos), triggering the retransmission mechanism of the client-side tcp, resulting in The rate drops. Or provide users with sub-optimal routes.
In general, the export bandwidth of the public network is insufficient (for example, a small isp has two public network exports, and broadband has a total of 2Gbps, but he sold the broadband to 500 or even 1000 users. It is incredible, telecommunications Do the same).
There are also user-level factors. Because you don’t know what equipment you are talking about, it is generally understood as a hundred and ten ordinary household equipment.
1. The general wired internal network and the network segment transmission are difficult to fill the bandwidth of the second layer backplane, but if it is the single-band b/g/n wireless half-duplex mechanism, the performance of multi-terminal simultaneous data transmission will be The line speed drops, the more people / the longer the transmission time, the lower the rate.
2. A slightly more professional device will indicate how much Gbps/Mbps the backplane bandwidth of the second layer of the device is. The forwarding rate of the three-layer routing mode (cross-network segment, cpu calculation route) in the packet is pps, you open After the nat is how much, when the routing strategy or security strategy is opened, respectively, Xiaomi is not bad in the home field, but do you see it? Is it true that many people bought and brushed third-party firmware? In general, the equipment is too junk or the firmware is too junk. The manufacturer is not professional and only pays for the garbage.
You can't control the factors on the front of the public network unless you add money to buy vip or change operators. At the client level, if you are professionally separated from the edge routing gateway and the access device (wired access. Incoming/wireless access), don't bother it on one device, it will be under pressure. Or simply go buy a 300+ dual-frequency router that supports ac, it is better to brush third-party firmware.
Spare Parts For Other Tobacco Machines
Spare parts for Sasib, Schmermund, and any other unmentioned tobacco machine can be manufactured and supplied according to your drawings or samples. We have experienced technicians who have been in tobacco industry for over 40 years and we`re sure all your needed knives and spare parts can be manufactured as good as OEM parts.
For more information, pls contact and check with our customer service.
Spare Parts For Other Tobacco Machines
Customized Tobacco Machine Spare Parts,Wearing Parts For Customized Tobacco Machines,Customized Replacement Parts For Cigarette Making Machines,Customized Replacement Parts For Cigarette Packing Machines
Zhengtong Special Material Factory Hi&New Tech Zone Chengdu , https://www.ztferre.com