Y Type Bsp Thread Brass Strainer

Specification                                                           



SPECIFICATIONS FOR Manufacture Supplier Brass Y-Strainer/Filter:
 

^{Descriptions(YBV-010-01):}
Body Material: Brass
Cap: Brass
Washer: Nylock
Mesh: Stainless Steel
Medium: water
Temperature: -10ºC-140ºC
Thread: Female
Working pressure: Up to PN 32.0
Thread: PT. PF. NPT. G. BSP. NPS . BSPT
Available from Male to Male 

(Brass Y Strainer, Filter )Structure: 


About Y-Strainer:
The most common type of strainers is Y-strainer. Its name is derived from its y-shaped form. This type
is commonly used in pressurized lines, steam, liquid or gas, but can also be applied in vacuum or suction
situation. It has low resistance to fluid passage or straight passage which in turn results to low pressure
loss. This is why y-strainers are being utilized for applications where only small amounts of solid particulates
are expected to be drained and frequent clean out would not be necessary.

The y strainer is normally used where there is a small amount of material to be collected. This strainer
can be installed in the horizontal or vertical position. The basket must be to the bottom of the pipe or
facing the down flow direction to collect the particles. A y strainer can come with a blow-off connection
for automatic cleaning. With liquids y strainers have a greater pressure drop than basket strainers because
of their size (comparing same sizes). But with gases a y strainer has a relatively low pressure drop.

Installing a strainer before valves and instrumentation can save you costly maintenance and repair. When
you team up your Ward Strainers with Ward's soft-seated check valves (or ball valves from other
manufacturers), you'll eliminate damaging contaminants. Ward "Y" Strainers are available in a variety
of materials and a full range of end connections to accomodate many differrent services. The "Y" pattern
design keeps fluids flowing with minimal obstruction. A Teflon cap seal with optional graphite for higher
temperatures prevents leakage. Finally, maintenance is easy with Ward Strainers, which feature a blow-off
outlet for self-cleaning .

1/2''-2'' Brass Y-Strainer Specifications:
Hot Sale products                                                   




About us                                                                  


Perfect Pre-sale and After-sale Service               



Our company:

A Professional International Trading Company

Shanghai Intelsheng is an international trader mainly dealing with the most of brass
components including fittings, valves, manifolds and faucets.We currently export
variety of products to Europe ,US and east Asia.

Moreover, our manufacturer, TopFlow, founded in 2005, is equipped with advanced machines,operated
by technical employees and managed by experienced staff. We have a 20 years' experienced
French R&D team to provide the best design for our products. Besides, ODM and OEM services are
offered for over 10 years.

We provide the best quality and high-cost performance products. As a part of group of TopFlow,
we are committed to establish a set of mature and perfect international trading service to customers.

Offering Great Pre-and After-sale Service

Our company places the customer first to build value and trust through superior knowledge of the global
markets we serve. We attach great importance to pre- and after-sale service. Our products and services
will continue to provide innovative water solutions delivered by exceptional people.

Our factory:

TopFlow, as the headquarters of Intelsheng is a company of integrating trading and manufacturing,
also is specialized in studying and developing all kinds of brass and stainless steel products, especially
with fittings, valves and plunger pump components to answer worldwide water solutions needs.

Continuous improvement is a must, done by studying and developing business processes, seeking out
innovative solutions, and by listening to market demands, therefore, company has been separated from
Zhejiang WDK copper in 2006, now TopFlow mainly service OEM fittings and valves, as well as
plunger pump field.Within OEM products, company holding strong work relationship with a French
R&D company, who is specializedin the conception and improvement of components for valves and fittings.
Engineers are especially familiar with the designing of brass OEM products.

Our products advantages:

 Imported Advanced Machineries manufacture high- performance products.
20 years' experienced French R&D team provide the best designing
Offering the reasonable price, delivering on time , providing a 24-hour after-sales calling service
Diversified brass products, helps customer to carry out one-stop procurement .

Our customer service:

Technical - equipped with advance imported Japanese machine center, special CNC. Our huge tons forge
machines solve most of irregular products.

Reliability - innovative, value-add designs are focused on the end user and installer to provide ease of
installation and low life-cycle costs.

Serviceability - with two major cooperative partners in Europe and Japan who can offer help to solve most
of cases.

Special professional customized service process:                                                      

                                     ↓              ↓                                                               ↓             ↓                          ↓             ↓             ↓                 ↓        ↓                ↓        ↓
FAQ                                                                        

Q: Are you trading company or manufacturer ?
A: We are a trading and manufacturer company.

Q: Do you have standard products?
A: Yes, we have standard products. We also manufacture customized products by drawings or
samples.Customers give us drawings and specifications, and we will manufacture accordingly.

Q: What is your payment term? 
A: We can accept Paypal or Western Union for trail order, and T/T 30% down payment, balance
to be paid before shipment. or L/C for normal order

Q: Can I get samples from your factory?
A: Yes, Samples can be provided.

Q:  What is your advantages?
A: As a professional brass valve and brass fitting manufacturer,we have most advantages:
    1. Made from high quality Brass. 
    2. Direct factory price. 
    3. ODM/OEM and customized services are welcome. 
    4. Punctuality delivery time. 
    5. Sample can be offered. 
    6. Accept small quantity order. 
    7. Easy to install. 
  .............More

Contact us                                                             





We do our best, offer customers best working. 
Perfect 24 hours after-sale service could be solve all problem. 

Bag Feeding Packaging Machine

hangzhou mankun imp. exp. co., ltd. , https://www.multihz.com