Yx-125 Round Down Pipe Roll Forming Machine

Profile drawing:

Down pipe forming machine mainly consists of decoiler, roll forming system, cutting equipment, protective
guard, hydraulic system, control system, and product supporter. Curving pipe forming machine is the complementary equipment for down pipe forming machine. It can make curve for down pipe to meet the requirement of practical engineering projects.

Features
1. High efficiency: Capable of producing down pipes with any length.
2. Good appearance: The color of down pipe can be in accordance with the house
3. Easy installation and long lifetime.

Details of each composition
A: Roll forming main machine
1: Coil width: Depend on profile
2: Working speed: 8m-10m/min (not contain cutting)
3: Roll station: 20stations
4: Material of roller: 45# forge steel, polished and coated with chrome
5: Material of main shaft: 45# forge steel diameter roller: 56mm
6: Main power: 3kw
7: Forming thickness: 0.5mm color steel
8: Transmission: By Chains
9: Size of machine: About 8500 x 1000 x 1200 (L x W x H)
10: Weight: About 4500Kgs
11: Color: Blue and yellow (also can change depend on customer request)
10: Cutting:
(1)Flat-sheet cutting: It is used when changing the coil of raw material; It can cut the coil rapidly and time-saving.
(2)Cutting after forming: Cut the sheet after roll forming to required length
(3)Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
(4)Material of blade: CR12with heat treatment
(5)Length measuring: Automatic length measuring
(6)Tolerance of length: +/- 1.5mm

B. Uncoiler
Dimensions: 1700mm*1000mm*800mm
Width of feeding: 500mm
Capability: 3 Ton
Bound of expand &fight: 420mm-510mm
Mode of expand &fight: Inner expand &fight by manual
Way of feeding: Manual

C: Control panel Panasonic
(1)Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
(2)Automatic length measurement:
(3)Automatic quantity measurement
(4)Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5)Length inaccuracy can be amended easily.
(6)Control panel: Button-type switch and touch screen
(7)Unit of length: Millimeter (switched on the control panel)

D: Hydraulic station
1: Hydraulic station power: 7.5kw
2: Hydraulic pressure: 12Mpa

E: Down pipe elbow machine:
1: Control system: Strong electrical current
2: Main motor power: 2.2kw
3: Max bend angle: 900
4: Function: Bend and fasten at the same time
5: Dimension of the machine: 1300 mm× 650 mm× 1500 mm
6: Speed of bend: 20-25m/ min

F: Manual out table:
(1)Jointed by 60mm*40mm tube
(2)Size: 1.0m long*0.8mwide*0.6-1mhigh
(3)One out table with two support rollers

Our company is a professional truck and Trailer Lamps manufacturer for more than 10 years,specializiing in producing and desinging all kinds of lamps with our own technology and development team.

Specification:

Long life span

High Quality

Waterproof

DOT.E-mark Approval

Using Scope:

Trailer Tail Lamps, Combiantion Lamps, Semi Trailer, Emark

Company Profile And Workshop Equipment

Trailer Tail Lights

Trailer Tail Lights,Light For Truck Trailer,Led Trailer Tail Lights,Led Tail Light

Shaoxing Groupstar Electric Appliance Co., Ltd. , http://www.led-auto-lamps.com