70ton 75ton 80ton Module Air Cooled Screw Water Chiller

  • Model NO.: HWAL
  • Cooling Method: Air-cooled
  • Selected Voltage: 220V, 380V, 160V, 440V etc.
  • Noise Level: Ultra Low
  • Application Machine: Combination machine
  • Condition: New
  • Cooling Capacity: 138-1116kw
  • Cooling Power Input: 44.7-320kw
  • Compressor Type: 6+7 Semi-Hermetic Twin Screw
  • Heat Water Temperture: 45-50 Degree C
  • Weight: 1050-8600kgs
  • Transport Package: Plastc+Foam+Woden Case
  • Origin: Guangdong Foshan
  • Type: Air-Cooled
  • Unit Structure: Integral
  • Compressor Number: It Depend on The Cooling Capacity
  • Application Fields: Air Conditioning
  • Certification: ISO, CE
  • Name: 70ton 75ton 80ton Module Air Cooled Screw Chiller
  • Heating Capacity: 175-1312kw
  • Heating Power Input: 47.9-340kw
  • Refrigerant: R22/R407cr410A etc
  • Air Side Exchanger: Corrugated Aluminum Fin with Female Copper Tube
  • Trademark: Headpower
  • Specification: 1unit/case
  • HS Code: 8418692090
1)The Feature of 70ton 75ton 80ton Module Air Cooled Screw Water Chiller
a..Excellent performance
The main body is equipped with globally advanced semi-hermetic screw compressor,intergrating the motor,without worrying about shaft seal leakage.
The single or number of compressors are provided with startup-shutdown cycle control program so as to uniformly load parts and extend their service life.
Multiple refrigrating cicuits are provided for the sigle or number of comprssors ,and when on cicuits is under maintenance,other cirucits are albe to run nomally as mutual standby.
Unload deprssurized start is provided for the compressors to prevent the impact on the power grid

b.Complete safety protections
Pressure protection:High and low-pressure protecting devices
Motor protection:Voltage-loss protection, phase-loss protection,inverse phase protection and over-heat protection.
Anti-freezing protiction:The unit will stop running in case of excessively low cooling water temperature
Safety valve protection:when the refrigerant pressure exceeds a certain value, the safety valve will be turned on automatically
Above device  protections ensure the safe and reliable running of the unit
c.Easy assembly 
The unit enjoys compact structure,covers small area,saves machine room space;it almost not vibrates due to the provision of foundation anti-vibrating measure.
Upon delivery of the units R22 refrigerant and lubricationg oil have been filed into it, then it's only necessary to connect the evaporator water pipe during assembliy,saving time and cost.

2)Product model:
Model Number HWALR150 HWALR200 HWALR250 HWALR330 HWALR400 HWALR500 HWALR600 HWALR500D HWALR650 HWALR800D HWALR1000D HWALR1200D
Cooling Capacity KW 150 182 245 322 388 498 596 490 645 776 996 1192
Heating Capacity KW 185 212 285 380 445 566 683 570 760 890 1112 1366
Cooling Power Input KW 48.2 57.7 76 99 118 148 183 252 198 236 296 366
Heating Power Input KW 47 56 74 97 113 144 178 248 194 226 288 356
Power Supply 380V/3N~50Hz
Energy Control 0~25~50~75~100% / Infinitely Variable Control
Compressor Type 6+7 Semi-closed Double Screw Type
Number 1 1 1 1 1 1 1 2 2 2 2 2
Refrigerant Type R22 (other refrigerant systems(R407C,etc) are available too.)
Way of Throttling External Balance of Thermal Expansion Valve/ Electronic Expansion Valve
Refrigerant Volume  kg 48 62 74 85 115 145 162 162 171 230 290 324
Heat Exchanger of Air Side Internal Thread Copper Tube with Aluminium Fin
Condensing Fan Type   Ultra-low Noise Axial Fan
Power KW 1.1*4 1.5*4 1.5*6 1.5*8 1.5*10 1.5*12 1.5*14 1.5*12 1.5*16 1.5*20 1.5*24 1.5*28
Heat Exchanger of Water Side Type   Dry Shell and Tube 
Cooling Water Flow m³/h 26 32 43 56 67 86 102.5 85 111 135 172 223
Heating Water Flow m³/h 28 37 49 66 77 98 118 99 131 155 192 235
Connection Pipe   DN80 DN80 DN100 DN100 DN100 DN125 DN125 DN125 DN150 DN150 DN150 DN200
Water Resistance KPa 50~60
Partial Heat Recovery Heating Capacity KW 55 65 86 114 135 170 205 170 230 268 335 410
Hot Water Volume m³/h 15.7 18.6 24.6 32.6 38.7 49 59 49 66 77 96 118
Total Heat Recovery Heating Capacity KW 158 180 245 325 380 480 580 485 646 756 945 1160
Hot Water Volume m³/h 45 52 90 93 109 138 166 139 185 217 270 320
Noise Level dB/A 64 64 65 65 66 66 67 68 68 69 70 71
Dimensions Length mm 2300 2500 3400 4400 5400 6400 7400 6400 8400 10500 6400*2 7400*2
Width mm 2200 2250 2250 2250 2250 2250 2250 2250 2250 2250 2250 2250
Height mm 2200 2250 2250 2250 2250 2250 2250 2250 2250 2250 2250 2250
Notice: 1. Nominal cooling condition:  inlet/outlet water temperature is 12/7ºC, the air dry/wet bulb temperature is 35/24ºC; 
2. Nominal heating condition:  inlet/outlet water temperature is 40/45ºC, the air dry/wet bulb temperature is 7/6ºC.
3. The water supply of heat recovery refers to the water volume when the water temperature increases from 20ºC to 50ºC. 
4.other refrigerant systems(R407C,etc) are available too.                               
5. The above dimensions are just for reference, they maybe modified due to improvement.
3) Dispaly:
70ton 75ton 80ton Module Air Cooled Screw Water Chiller
4)Packing and shipping
70ton 75ton 80ton Module Air Cooled Screw Water Chiller

5)Our company file70ton 75ton 80ton Module Air Cooled Screw Water Chiller

SOGAMEF
Air cooled chiller
Gabon

4
SeaService shipping
Marine air conditioner
Russia

5
EURO STANDARD LIMITED
Fresh Air Handling Unit
New Zealand

6
Henrich trading center
Air cooled/water cooled air conditioner
Philippines

7
Marine Engineering Systems Pte.Ltd
AHU, chiller,etc
Singapore

8
Elektro Werner Heitzinger
Heat recovery air handling unit
Austria

9
Nyborg Marine Equipments AS
Marine Air Handling Units
Norway

10
Wilfred Limited
Heat recovery air handling unit
UK

Contact us:

Carrie Mak

GuangDong Head-Power Air Conditioning Co.,Ltd.

Add: Shiling Chenbian Section, 321 National Highway, Shishan Town,

Nanhai District, Foshan,Guangdong,China.

Mobile :86-15024293999 

 Fax:86-757-86688063

 

http://www.china-headpower.com

In hot die forging press, the automatic line for host is active the development direction of forging crankshaft production, the production line will be widely used precision shearing blanking, forging (cross wedge rolling) blocking, medium frequency induction heating, finish hydraulic press and other advanced technology, and equipped with robots, conveyor belt,back mold device of the turntable in auxiliaries, such as formation of flexible manufacturing system (FMS).

Through FMS, the work piece and mold can be replaced automatically and parameters can be adjusted automatically.Display and record the data of the thickness and maximum pressure of the Forging Parts and compare it with the fixed value. Select the optimal deformation amount to obtain the quality products.The whole system is monitored by the central control room to realize unmanned operation.The crankshaft forged by this forging method has the full fiber property of internal metal streamline and can increase the fatigue strength by more than 20%.



Forging Parts

Forging Parts,Forged Components,Forging Casting Parts,Machinery Forged Parts

YaoPeng Metal Products Co., Ltd. , https://www.ypmfg.com