Table 1 chrome ore grade and mining technical indicators
project | Deposit and ore type | ||
Endogenous deposit | |||
Rich mine | Lean mine | ||
ω(Cr 2 O 3 )% | Boundary grade | ≥25 | ≥5 |
Minimum industrial grade | ≥32 | ≥12 | |
Minimum mining thickness | 0.3~0.5 | 1.0 | |
Stone removal thickness | 0.5 | 1.0 | |
Note: 1, with metallurgical ω (Cr 2 O 3) / ω (FeO)> 2 chromium or iron ore concentrates, pyrometallurgical (wet refining of metallic chromium is not limited thereto); ω (SiO 2) ≤ 8% (not limited by smelting high carbon chromium by ore heat method); ω (P) ≤ 0.09%, ω (S) ≤ 0.05%.
2. Chromite or concentrate for refractory materials, ω(SiO 2 )≤10%, ω(CaO)≤2%, ω(FeO)≤14%.
3. For chromite or concentrate for chemical industry, ω(SiO 2 )≤8%, ω(Al 2 O 3 )≤15%.
4, chrome ore with chrome ore, ω (Cr 2 O 3 ) ≥ (10 ~ 20%), ω (SiO 2 ) ≤ 10%.
5, when the required amount of associated chromite selected from PGE reached (0.3 - 0.4) × 10 -6 time, should be assessed.
7. The selection of the minimum mining thickness of the rich ore is 0.5m for the single ore layer and 0.3m for each layer of the double ore layer.
Table 2 General requirements for industrial indicators of nickel deposits
Project | Nickel sulfide ore | Nickel oxide-nickel silicate | |||
Primary ore | Oxidized ore | ||||
Pit mining | Lucai | Pit mining | Lucai | ||
Boundary grade (mass score) % | 0.2 to 0.3 | 0.2 to 0.3 | 0.7 | 0.7 | 0.5 |
Minimum industrial grade (quality score) % | 0.3 to 0.5 | 0.3 to 0.5 | 1 | 1 | 1 |
Average grade of mineral deposit (mass fraction) % | 0.8～2.0 | 0.6~1.0 | 1.5 | 1.2 | |
Minimum recoverable thickness m | 1 | 2 | 1 | 2 | 1 |
Stone removal thickness m | ≥2 | ≥3 | ≥2 | ≥3 | 1 to 2 |
Concrete Spun Pile Mould is a kind of Steel Mould, it is mainly apply to Concrete Spun Pile Plant to produce the Centrifugal Reinforced Technology (PHC ) Concrete Spun Pile, In order to meet customer's requirement to produce high strength PHC concrete pile, Jiangsu Haiheng Company have long term cooperation relationship with Japan spun pile factories for improve the design and technology of mould and use advanced processing equipment, HH's Spun Pile Mould has got the leader market share in the countries like Japan, Vietnam, Indonesia, Malaysia, Thailand, Myanmar, Cambodia etc.
Our Mould Advantages:
1. Mould's tongue-and-groove is designed by the dislocation of upper and lower shell boards, matchboard is plane surface. Slurry does not leak and it is easy to clean mould.
2. The tyre is "T" type forgings. Tyre and its support plate are as whole.
3. Self-developed six-meter press machine of mould inside shell. The inside shell seam extends from two meters to six meters, to minimize welds and mould strength and improve the external appearance of the products
4. Welding process uses CO2 arc shield weld which makes its appearance simple and weld seam neat. Our company cooperated with colleges to introduce [robot welding project".
5. Long lathe, manufacture the whole set mould under fifteen-meter length, greatly increases concentricity of the tyre and flange.
Spun pile Mould Specification:
|
Inside diameter(mm) |
Wheel base(mm) |
Wheel Diameter(mm) |
Length(mm) |
|
Ø300 |
2000 |
510 |
7-11 |
|
Ø350 |
2000 |
610 |
7-11 |
|
Ø400 |
2000 |
610 |
7-12 |
|
Ø450 |
2000 |
710 |
7-12 |
|
Ø500 |
2000 |
710 |
7-12 |
|
Ø550 |
2000 |
810 |
7-12 |
|
Ø600 |
2000 |
810 |
7-15 |
|
Ø800 |
2000 |
1010 |
7-15 |
|
Ø1000 |
2000 |
1210 |
7-15 |
If you have any questions, please contact with us directly. Concrete Pile Moulds are produced by High Quality and Esay transportation, quick assembling, good rigidity and smooth working. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Spun Pile Mould
Concrete Spun Pile,Reinforced Concrete Spun Pile Mould,Phc Spun Pile Mould,Pretensioned Concrete Spun Pile Mould
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com