In recent years, we have seen the rapid development of science and technology in our great motherland. This made me feel extremely proud for me as a Chinese. With the advancement of technology and the progress of people, we will join the Chinese cutting machine trading network to make progress together. Join the hotline, we look forward to your call. Details:/
The use of CNC cutting machine, in addition to the hardware equipment and operating process requirements, the quality of common wear parts and accessories also need to have a certain degree of understanding, cutting nozzle as a key part of CNC flame cutting machine, in peacetime The use of the process, the need for operators to have a better grasp of its quality, the following is the CNC cutting machine manufacturers in many years of production and maintenance work in accordance with the observation of the cutting quality of some of the cutting nozzle failure and treatment methods, hoping to give everyone A little use for reference.
1, the nozzle head and the torch with lax handling after the flame is normal, but open the cutting oxygen regulator valve, the flame immediately extinguished. The reason for this is that the tip of the cutting nozzle and the torch are not uniform. At this point, the cutting nozzle should be tightened. When it is ineffective, the cutting nozzle should be removed and lightly pressed with fine sandpaper. Grind the tip of the mouthpiece until it fits tightly.
2. Keep the cutting nozzle channel clean The cutting nozzle channel should always be kept clean and smooth. Contaminants in the hole should be cleared at any time with a pin.
3. After the ignition of the flame is extinguished, when the preheating oxygen regulating valve is adjusted to adjust the flame, if the flame is extinguished immediately, the reason is that there is dirt in the gas channels or the flare of the nozzle of the injection pipe is not strict, and the cutting nozzle jacket and the inside Improper fit of mouth. At this time, the ejector nut should be tightened; when it is ineffective, the ejector should be removed, the dirt in each gas channel should be removed, and the gap between the torch cover and the inner sleeve should be adjusted and tightened.
4. Select the right cutting nozzle and choose the right cutting nozzle according to the thickness of the cutting workpiece. When assembling the cutting tip, the inner mouth and the outer mouth must be kept concentric so that the cutting oxygen jet is located in the center of the preheating flame. When installing the cutting tip, tighten the cutting tip nut.
[I can't think of it. I can't do it. Change your style from now on. Opening the Chinese cutting machine trading network is equivalent to opening up your wealth road, come and click on the website now! 】
Editor: zgqgjjyw
This juice tea hot Filling Machine has washing,filling,capping three functions in one body,total process is automatic.
Complete Juice production line:
1. PET Bottle Blowing Machine
2. Water treatment system
3. Juice mixing system
4. Juice filling machine
5. Spray sterilization6. Blow dryer
7. Label sticker machine
8.Shrink packing machine
9. CIP system
Hot Filling Machine,Juice Production Line,Juice Filling Machine,Automatic Liquid Filling Machine
WENZHOU WINIBER MACHINERY EQUIPMENT CO., LTD. , https://www.winiber-machinery.com