CTB-918 for Quartz Sand Wet Magnetic Separator

Overview: Magnetic separator can be divided into dry magnetic separator and wet magnetic separator. The magnetic separator is the most widely used mining machine with advantages of simple structure, easy to operate, easy to maintain and so on. The magnetic separator is widely used in iron powder removal, and magnetic separator is also widely used in resource recovery, timber industry, mining, ceramic, chemical, food and so on. The magnetic separator is suitable for wet magnetic separation of magnetite, pyrrhotite, roasted ore, ilmenite and other materials with granularity below 3mm, and the iron removal of coal, non-metallic mineral, building material and other material.



Structure: The magnetic separator is mainly composed of drum, roller, brush roller, magnetic system, tub and transmission parts. Cylinder is rolled welding by 2-3 mm stainless steel plate, and the end cover is aluminum casting connected by stainless steel screw and barrel. Motor regulates motor speed through the reducer, which drives the cylinder and magnetic roll do rotary motion. Magnetic system is open, installed in inside cylinder and all bared magnetic. Magnetic block is installed in the plate of yoke by stainless steel bolt, and the shaft of the yoke is out of the barrel. The end shaft is fixed with turn arm, which can adjust the magnetic system angle. The working area of trough is made up with stainless steel, and the frame and other parts of the cell body is welded with ordinary steel.



Characteristics
1. Material adaptability
Drum sieve (rotary cylinder sieve) is widely used in all kinds of material screening, either inferior coal, slime, or bituminous coal and other materials can smoothly screening.
2. Simple and varied feeding mode
Feed port can be based on the actual set of juice whether it is a belt,funnel or other feeding methods,can be smooth feeding without special measures.
3. High screening efficiency
Provided with a comb type cleaning mechanism,improving the screening efficiency of the equipment no matter how dirty the materials are.
4. Large sieve component,easy to large-scale
Circle area of the screening of effective area is large, so that the material can fully contact with the screen, thus per unit time screen component is big. Because of its simple structure, convenient arrangement, new technology and mature characteristics and easy large-scale.



5. Good working environment
Fully enclosed structure, material dust will not fly, to avoid the pollution of the work environment.
6. Low noise
Low speed and sealed isolation cover reduce the noise of the trommel screen.
7. Long lifespan and easy maintenance
Long service life,little wearing parts,small maintenance
8. Convenient maintenance
Equipment seal isolation on the cover can be taken apart, does not affect the normal operation of the machine, and the maintenance is very convenient.


 

Overview: Magnetic separator can be divided into dry magnetic separator and wet magnetic separator. The magnetic separator is the most widely used mining machine with advantages of simple structure, easy to operate, easy to maintain and so on. The magnetic separator is widely used in iron powder removal, and magnetic separator is also widely used in resource recovery, timber industry, mining, ceramic, chemical, food and so on. The magnetic separator is suitable for wet magnetic separation of magnetite, pyrrhotite, roasted ore, ilmenite and other materials with granularity below 3mm, and the iron removal of coal, non-metallic mineral, building material and other material.



Structure: The magnetic separator is mainly composed of drum, roller, brush roller, magnetic system, tub and transmission parts. Cylinder is rolled welding by 2-3 mm stainless steel plate, and the end cover is aluminum casting connected by stainless steel screw and barrel. Motor regulates motor speed through the reducer, which drives the cylinder and magnetic roll do rotary motion. Magnetic system is open, installed in inside cylinder and all bared magnetic. Magnetic block is installed in the plate of yoke by stainless steel bolt, and the shaft of the yoke is out of the barrel. The end shaft is fixed with turn arm, which can adjust the magnetic system angle. The working area of trough is made up with stainless steel, and the frame and other parts of the cell body is welded with ordinary steel.



Characteristics
1. Material adaptability
Drum sieve (rotary cylinder sieve) is widely used in all kinds of material screening, either inferior coal, slime, or bituminous coal and other materials can smoothly screening.
2. Simple and varied feeding mode
Feed port can be based on the actual set of juice whether it is a belt,funnel or other feeding methods,can be smooth feeding without special measures.
3. High screening efficiency
Provided with a comb type cleaning mechanism,improving the screening efficiency of the equipment no matter how dirty the materials are.
4. Large sieve component,easy to large-scale
Circle area of the screening of effective area is large, so that the material can fully contact with the screen, thus per unit time screen component is big. Because of its simple structure, convenient arrangement, new technology and mature characteristics and easy large-scale.



5. Good working environment
Fully enclosed structure, material dust will not fly, to avoid the pollution of the work environment.
6. Low noise
Low speed and sealed isolation cover reduce the noise of the trommel screen.
7. Long lifespan and easy maintenance
Long service life,little wearing parts,small maintenance
8. Convenient maintenance
Equipment seal isolation on the cover can be taken apart, does not affect the normal operation of the machine, and the maintenance is very convenient.