Multi-Carrying Clip Feeder, Stamping Feed Accuracy, High Speed Punch

The clip feeder is widely known as the best feeding equipment for high speed presses.

The clip feeder feeds extremely fast, up to 1200 times/min, which can fully exert the best punching performance of all kinds of high-speed punches.

However, although there are many manufacturers of clip-on feeders on the market, they can only complete the transportation of a single belt, and cannot transport two or more strips at the same time.

Many modern processing occasions require the use of a high-speed punching machine to punch several strips of processing. At this time, if the standard clip-on feeder on the market is used, the tolerances of the strips will be slightly different.

In the fast pinch (maximum pinch speed is about 1200 times per minute), some thinner strips are not clamped or incompletely slipped, or the gap between the strips is easy to be inconsistent due to thickness. Displacement.

As a result, the clip feeder has inaccurate stamping feed accuracy, or incomplete stamping of incomplete feed, or even made stamping defective products or scraps, and more damage to the stamping die. A clip feeder that can transport multiple strips at a time.

As the largest feeder manufacturer in China, Ruihui Machinery actively responded to the demand of the stamping market, and developed and produced a multi-tape clip feeder on the basis of the standard clip feeder.

The utility model is composed of a plurality of strip feeding structures, and is configured to clamp the plurality of strips to form a press clamp, and the pinch action can be performed with high precision and high reliability, without being affected by the tolerance of the strip thickness.

It is possible to form a separate feed material in a densely packed structure in the same pinching device, and to provide different width and number of tape feeds at different feed stamping intervals of different molds.

When the Ruihui clip feeder is used, the transmission device sequentially drives the feeding device and the relaxing device, and at the same time, the pressure air flow is introduced to actuate the shaft pin clamps of the respective body bodies, and the clamps are clamped to feed the materials.

The relaxation device piston rod cuts off the flow of the pressurized air, and the extension spring pulls the shaft to clamp the clamp and clamps the yoke to feed the material.

When the feeding device grips the material in place, the pressure air flow is introduced into the top of the piston rod of the relaxation device to lower the pressure clamp and clamp the material.



At this time, the feeding mechanism cuts off the flow of the pressurized air and returns to the position to feed the material in the next step, and the punching device performs the precise positioning action of each feeding strip.

At the same time, the device is released from the gap so that the strips are in a free state (this is to avoid disturbing the precise positioning of the stripping equipment by the punching equipment). After the mold performs the stamping operation to produce the product, the next feeding and stamping production is continued.




Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD" for you and for us, so we have professional team work and production line can make nice quality in short time.

1.  Pre-Sales Service:We have professional designers to meet the different requirement of our customers.

2.  After-Sales service:We have an efficient team to meet 24*7 all day service.

3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.

4.  Engineers can provide service machinery overseas.

The clip feeder is widely known as the best feeding equipment for high speed presses.

The clip feeder feeds extremely fast, up to 1200 times/min, which can fully exert the best punching performance of all kinds of high-speed punches.

However, although there are many manufacturers of clip-on feeders on the market, they can only complete the transportation of a single belt, and cannot transport two or more strips at the same time.

Many modern processing occasions require the use of a high-speed punching machine to punch several strips of processing. At this time, if the standard clip-on feeder on the market is used, the tolerances of the strips will be slightly different.

In the fast pinch (maximum pinch speed is about 1200 times per minute), some thinner strips are not clamped or incompletely slipped, or the gap between the strips is easy to be inconsistent due to thickness. Displacement.

As a result, the clip feeder has inaccurate stamping feed accuracy, or incomplete stamping of incomplete feed, or even made stamping defective products or scraps, and more damage to the stamping die. A clip feeder that can transport multiple strips at a time.

As the largest feeder manufacturer in China, Ruihui Machinery actively responded to the demand of the stamping market, and developed and produced a multi-tape clip feeder on the basis of the standard clip feeder.

The utility model is composed of a plurality of strip feeding structures, and is configured to clamp the plurality of strips to form a press clamp, and the pinch action can be performed with high precision and high reliability, without being affected by the tolerance of the strip thickness.

It is possible to form a separate feed material in a densely packed structure in the same pinching device, and to provide different width and number of tape feeds at different feed stamping intervals of different molds.

When the Ruihui clip feeder is used, the transmission device sequentially drives the feeding device and the relaxing device, and at the same time, the pressure air flow is introduced to actuate the shaft pin clamps of the respective body bodies, and the clamps are clamped to feed the materials.

The relaxation device piston rod cuts off the flow of the pressurized air, and the extension spring pulls the shaft to clamp the clamp and clamps the yoke to feed the material.

When the feeding device grips the material in place, the pressure air flow is introduced into the top of the piston rod of the relaxation device to lower the pressure clamp and clamp the material.



At this time, the feeding mechanism cuts off the flow of the pressurized air and returns to the position to feed the material in the next step, and the punching device performs the precise positioning action of each feeding strip.

At the same time, the device is released from the gap so that the strips are in a free state (this is to avoid disturbing the precise positioning of the stripping equipment by the punching equipment). After the mold performs the stamping operation to produce the product, the next feeding and stamping production is continued.




Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD" for you and for us, so we have professional team work and production line can make nice quality in short time.

1.  Pre-Sales Service:We have professional designers to meet the different requirement of our customers.

2.  After-Sales service:We have an efficient team to meet 24*7 all day service.

3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.

4.  Engineers can provide service machinery overseas.

Die Casting

Die Casting,OEM Aluminum Die Castings,Aluminum Die Castings

Metal Stamping CO.,LTD , http://www.nsaluminumdc.com