From April 8 to April 10, 2013, the 12th China (Shanghai) International Power Equipment and Generator Unit Exhibition (PowerExpo, ChinaPower2013) was held at Shanghai New International Expo Center. FPT Industries has officially launched a number of high-performance power generation engines (E4 Hall 4T020). At the Middle East Power Exhibition in mid-February, Fiat Power Technology received extensive attention due to its high power, low fuel consumption, and small body size. The debut of the Shanghai Power Exhibition also showed that Fiat Power Technology must promote its leading technology in China.
At this exhibition, Fiat Power Technologies displayed products including three different configurations of the engine and G-Drive, open and soundproof units, which were particularly noticeable in the G-Drive configuration. Compared with the original products, the new generator product demonstrated by Fiat Power Technology achieved a power increase of 20% in the power stage. Taking the NEF 4.5-liter engine as an example, the previous configuration power of this product can only reach 47kW to 98kW. It is now upgraded to a power range of 52kW to 120kW. The NEF 6.7-liter engine, which matches the mechanical pump injection system, was upgraded to a power range of 156kW to 170kW.
The power boost of both engines is attributed to the combustion optimization of high-performance fuel injectors and the calibration of specific fuel pumps. Also based on specific calibration data, the CURSOR series of G-Drive units has been optimized. Now customers only need to select a 300kW 8.7L engine to replace the existing 10.3L engine to achieve the same power target. With a power density of 120 kW and 300 kW, Fiat Power Technology can reach an average of 11% higher than the competition and is the best of the two power segments.
For areas where the product's economic performance is high, Fiat Power Technology's engine products are extremely attractive. In addition to the increase in power, the product's optimization in body size and displacement will also bring benefits to customers. For a customer operating a leasing business, products often need to be frequently converted to install locations, or fixed units are installed in confined spaces. The Fiat Power Technology products have relatively obvious advantages. Users can use a 4-cylinder machine instead of a 6-cylinder engine in the 120kW power section or a 8.7-liter engine instead of a 10.3 litre engine in the 300kW power section to achieve the same working results.
The G-DRIVE configuration of Fiat Power Technology's power generation engine products is currently designed for installation by major OEMs. Fiat Power Technology can not only provide products for major OEMs, but also provide products, individually customized open or closed units, and configure different bases, motors and control panels. Fiat Power Technology's power generation engine products cover the main applications, including temporary power generation and self-generation, special institutions, factories, and after-sales services. The current major products include the F5, NEF, CURSOR, and VECTOR series covering 31 to 740 kW.
Fiat PowerScience production bases are located in France, Italy, Brazil and China. Its power generation engine products are widely used around the world, and its over 1400 sales and after sales service stations throughout the world can meet global customers from sales to after-sales services. Within the various needs.
Fiat Power Technology Generators Product Description:
F5 series engine, 4 cylinders, 3.2 liters, power range from 31 to 56 kW. This exhibition shows an F32 engine.
The NEF series includes four-cylinder 4.5-liter and six-cylinder 6.7-liter engines with power ranging from 45 to 218 kW. Fiat presented the G-Drive configuration at the 2013 Shanghai Power Show and the new N45 engine G-Drive configuration with the development genset configuration and the new N67 engine G-Drive configuration.
CURSOR series engines, 6 cylinders, 8.7 liters, 10.3 liters and 12.9 litres, power range from 195 to 398kW. Fiat Power Technologies demonstrated the C87 engine and C13 G-Drive configuration at the 2013 Shanghai Power Show.
VECTOR series engine, V-type 8-cylinder, 20.1 liters, power coverage 610 to 740kW.
The G-DRIVE configuration of Fiat's generator engines has been designed for installation by major OEMs. Fiat Power Technology can not only provide products for major OEMs, but also provide product customization, open or closed units, configuration of different bases, motors and control panels.
About FPTIndustrial
FPT Industries, a subsidiary of Fiat Industrial Group, specializes in the design, production and sale of powertrains for road and non-road vehicles, ships and generator sets. The company has 8,000 employees, 10 factories and 6 R&D centers worldwide. The sales network covers more than 100 countries, including 100 distributors and more than 1,300 service stations.
Investment in China includes a management company in Shanghai and a joint venture. The extensive product line (31 to 740 kW for the 5 engine series and 300 to 500 Nm for the torque transmission) and the focus and investment in research and development make FPT Industries an industry leader in industrial powertrains.
milltek exhaust cat back,mbrp exhaust cat back,magnaflow exhaust cat back,corsa exhaust cat back
NINGBO YINZHOU MOXIN AUTO PARTS CO.,LTD. , https://www.mountxin.com