1. The installation position should be far away from the inlet, otherwise the switch will cause malfunction due to the fluctuation of the inlet.
2. If the switch device is in the wall of the container, an L-shaped angle bracket can be installed.
3. If the switching device is in the stirring area, install the anti-wave tube or anti-wave baffle.
4. Select the flange connection pipe whose inner diameter is larger than the float ball diameter.
5, the use of multi-core cable is recommended when wiring.
6. The load of the controlled line must match the float switch contact capacity.
7. The specific gravity of the liquid to be measured must be greater than the weight of the float.
8. The operating point of the float ball has been adjusted at the factory according to the customer's order request. Please do not adjust the position of the float freely.
Level switch contact protection circuit
When the float switch is used in a circuit that has inductive loads such as motors, relays, solenoids, etc., it is recommended to connect the protection circuit in parallel across the load. Such as: RC (buffer), varistors, diodes and so on. Note: Do not connect the float switch directly to the solenoid valve, motor, or solenoid switch.
When the float switch is used in capacitive loads such as capacitors, incandescent light bulbs, and long cable lengths, a swell current will occur between the contacts of the switch. It is recommended to connect the protection circuit in parallel across the float switch. Flow resistors or surge absorbers, etc.
QUANTUM specialize in the design, manufacture and supply of a range of mixers best suited to your specific mixing and material characteristics.
Whether your application is batch mixing or continuous mixing, major, minor and micro additives, liquid to solid, solid to liquid, or liquid additives or de-lumping during mixing, QUANTUM has vast experience - over 30 years in building mixers to assist you in your suitable mixer selection.
QUANTUM Standard Range of Mixers:
Batch Mixing:
• Ribbon Blender
• Paddle Mixers.
• Z arm Mixers
• Plough shear
• Continuous mixing:
• Twin Pug Mixers
• Twin ribbon mixers
Conditioning and High Shear Mixing:
• Plough Shear Mixer. (U trough or Tubular design)
QUANTUM provide the latest technology to offer our customers the greatest possible saving in production and performance.
We can provide complete turnkey mixing plants including batch mixing, loading and un-loading systems, product de lumping during mixing or gentle mixing action for friable products.
Mixing Criteria for Selection of Mixer
The type of mixer is dependent on many factors some are as follows but these are not limited to the following:
• Production requirements: Batch or Continuous.
• Capacity throughput
• Characteristics and nature of product, additives and mixed material characteristics and flow ability.
• Uniformity of mix and additives.
• Quantity and percentage of Major, Minor and Micro ingredients
• Powder to liquid or liquid to solid mixing requirements.
• Does the material form lumps during mixing or require conditioning
• Clean down and contamination/ Clean down and sanitary requirements.
• Selection of suitable end seal for specific materials is very important.
• Heating or Cooling.
QUANTUM Paddle Mixers
The QUANTUM Paddle Mixer is unsurpassed for its FAST, THOROUGH BLENDING. Curved, adjustable paddle blades combine a scooping and lifting action with a unique [criss-cross" blending pattern to assure a complete uniform blend for partial batches as well as full batches.
Unlike conventional Ribbon Blenders, which tend to be slow and do not allow for blending of partial batches.
Thorough Clean-Out and Positive Discharge, this is achieved with the paddle blades being curved to conform to the contour of the mixing chamber and installed to allow a close tolerance with the mixer shell. This close tolerance assures a thorough clean-out of the chamber and a positive discharge.
QUANTUM Mixers are of heavy duty construction, giving long life and trouble free performance.
An innovative [WHIZZER" can be installed on any paddle or any plough-type fluid bed mixer to provide capabilities to de-lump, pulverise, grind, finish, blend, fiberise or intensively agitate.
QUANTUM Z-Arm Mixers
QUANTUM Z-Arm Mixers are designed for fast, reliable mixing of products for the food industry. Our mixers are successfully operating and mixing ingredients for confectionery through to cereal products.
The Z-Arms Mixers have the following features:
• Z-Arms cast from stainless steel in one piece
• Mixers can be polished to suit your requirements
• The shafts seals can be quick knock down sanitary type
• The mixer bowls are heavy duty, with continuous polished welds
• The mixer bowl can be tilted for fast and complete emptying
QUANTUM Pug Mixers
QUANTUM Pug Mixers are suitable for a wide range of industries from clay and bricks through to mineral extraction processes. Pug mixers are used for applications requiring continuous flows with difficult to handle sticky products. QUANTUM have designed mixers with highly abrasive and corrosive products. Different materials of construction can be mild steel, stainless steel through to exotic alloys such as Alloy 600 and Hastelloy.
Our Pug Mixers can be supplied with different options such as:
• Heating or cooling jackets
• Liquid injection nozzles
• Wear liners
• Adjustable mixer paddles to control throughput and retention time
Industrial Mixer,Rotary Ribbon Mixer,Sigma Blade Blender,Industrial Mixer Grinder
Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.yzconveying.com