Milk milk tanker is also called milk tanker and liquid food tanker. The tank body is made of food grade stainless steel. The outside of the tank body needs insulation layer to prevent the milk from deteriorating. The inside of the tank body is required to be smooth and clean, and no acute angle is needed. Generally it needs to be in each milk. Add cip (cleaning device) in the cabin.
The top of the tank is provided with a vent valve, and the automatic adjustment is started to reduce the evaporation loss of the liquid and prevent the deformation of the liquid filling body when the positive and negative pressures are generated in the tank. An electrostatic grounding plate may be provided according to the needs of the transportation medium. Add fireproof cover to prevent accidental traffic accidents due to static electricity and Mars; the amount of residual liquid in the tank is small, which meets the requirement of less than 1% of the national standard; more optional components; optional flowmeter, level gauge, safety lock Device, anti-spill device, etc. A variety of configurations, a variety of options to meet market demand.
Fresh milk transporter conversion configuration: The tank structure is divided into insulation layer protection layer, insulation layer and tank three layers.
one. The tank body can be made of food grade 304 stainless steel. The tank body can be made into 2-3 tanks. Each milk tank is provided with a washer inside a cip (cleaning device) tank.
Second, the middle of the tank is a thermal insulation layer, which has a thermal insulation effect to prevent the fresh milk from deteriorating. The 30-degree temperature difference does not exceed 1 degree in 24 hours. Insulation material is 80 (mm) thick polyurethane foam insulation.
Third, the outer layer of the can (insulation layer protection layer) uses 2mm 304L stainless steel plate. The outer skin and trunk of the stainless steel are beautifully shaped. The whole body is beautiful in appearance, scientific in structure, light in weight and good in strength.
Fourth, there is a separate discharge port (self-flow port) and feed port (tank port) in each single-chamber.
Fifth, optional refrigerator, rock wool insulation, exhaust gas circulation heating, install stainless steel pump, so that the vehicle has a suction function.
Before March 1, 2012, the provincial department of industry and informationization shall, together with the traffic management department of the public security organ, complete the investigation of large and medium-sized vans that have not yet been manufactured or have been manufactured but have not been sold in accordance with national standards and relevant regulations. .
The Ministry of Industry and Information Technology pointed out that recently, serious and severe road traffic accidents have occurred frequently. From the analysis of accident investigations, there are management and operational problems such as overcrowding, overspeeding, illegal loading, and fatigue driving, as well as the safety technical performance problems of large and medium-sized passenger trucks.
The Ministry of Industry and Information Technology put forward clear requirements for the safety configuration of trucks. “Dangerous goods transport vehicles and trucks with a total mass of more than 12 tons shall be equipped with retarders or other auxiliary braking devices. The dangerous goods transport vehicles shall be equipped with a speed limiting device, and the maximum speed setting for speed limiting devices shall not exceed 80 kilometers. Wheels should be equipped with disc brakes;
Trucks with a total mass of more than 12 tons and trailers with a length of more than 8 meters shall be provided with tailgate signboards that comply with national standards. Vans and van trailers shall be equipped with reflective body-reflector markings that comply with the requirements.
All trucks shall be sprayed with total quality parameters on both sides of the cab, semi-trailer tractors with maximum allowable traction quality parameters, and the height of the rails shall be applied to the trucks and dump trucks. Tank cars and trailers shall also be in tanks. The height of the sprayed can body and the types of items allowed to be shipped, font height is not less than 80 mm. â€
Container Screen Printing Machine
Round Container Printing Machine,Uv Screen Printing Machine,Infrared Dryer Screen Printing,Cup Printing Machine,multi-color printing
GIG (DONGGUAN) CO., LTD , https://www.tubeprinter.com