According to estimates by the Green Energy Division of TrendForce, a global market research organization, the LED lighting market has a value of 35.3 billion U.S. dollars in 2014, a 47.8 increase from 2013. In 2014, the LED lighting penetration rate will also increase to 32.7, in which bulbs and lamps penetrate. The rate is 20 and 15. TrendForce senior analyst Guo Zhihao said that in order to meet the demand for new LED bulbs and lamps in 2014, it is estimated that 250 MOCVD machines will need to be added.
According to the LED chip factory's utilization rate this year, the production capacity of Taiwan and China's LED chip first-line factories are all in the high-end water level. Although there are still a large number of MOCVD machines in the Chinese market, these machines are mostly small. In the hands of the factory, in the case that the market price competition situation is still quite fierce, the cost of starting these MOCVD machines by small factories is too high, and it is expected that the small factories will continue to withdraw from the LED supply market.
In view of the rising demand for LED lighting in 2014, the competitive LED chip factory still needs to continue to increase production capacity in 2014. In addition to continuous improvement in yield, machine operating days and number of operations, it is estimated that LED chip manufacturers may adopt M&A small factories in 2014 to obtain capacity for MOCVD machines. Guo Zhihao further said that in terms of amplifying the MOCVD machine, the LED chip factory must wait for the MOCVD manufacturer to ship after placing the order, and it takes some time to install and adjust the machine. In other words, the new purchase machine is short. Capacity cannot be provided immediately. Therefore, the possibility of increasing the capacity of LED chip manufacturers in the acquisition of small factories will increase the capacity to prepare for the rapid development of the LED lighting market.
Matting Agent For Plastic Coatings
Description
1, Matting Agent popular used for the matte plastic coatings. It is synthetic amorphous micronized precipitated silica appearing as white powder and for both solvent-based and water-based system. Advanced matting efficiency is achieved by using silica with high pore volume and by fine control of the particle size and particle size distribution. It provides a superior matting and flatting, excellent coating appearance and transparency, cost efficient, effective anti-settling agent and easy dispersion, smooth, abrasion resistant ï¬lms of high surface quality. Silica Matting Agent reduce the gloss of a variety of products including coatings, paints, inks, lacquers, varnishes, while providing lower viscosity and better flow capability.
2, Silica Matting Agent suitable used for plastic coatings. It provided high matting efficiency, excellent coating appearance and better transparency. As well as low oil absorption, easy dispersion and smoothly touch with minimal impact of viscosity.
Feature
1, Easy to disperse.
2, High Matting Efficiency.
3, Excellent Transparency.
4. Excellent suspended performance.
5, Excellent mechanical properties and chemical properties.
6, Good scratch resistance.
7, Excellent Hand feeling.
Application
|
1, Plastic Coating, 3C Coating, Metal Coatings, Elastic Coatings. |
|
2, Industrial Coating, Metal baking Coating, Decorative Coating. |
|
3, Automotive Coating, Car Coating, Motorcycle Coating, Truck Coating, Bicycle Coating. |
|
4, Printing Inks, Gravure Printing Ink, Offset Printing Ink, Screen Printing Ink, Printing Packing Material. |
|
5, Wood Coating, PU Wood Coating, NC Wood Coating, UV Wood Coating. |
Advantage
|
1, We focus on silica matting agent market about 25 years. Know exactly the customer`s requirements, have most experience about this silica products, provide the best service to the customers. |
|
2, We have strict control of the batch quality, the physical index and performance are strictly tested before delivery. Will ensure that stable products of different batch. |
|
3, We are the reliable supplier for many countries and some International customers, such as AkzoNobel, Valspar, Nippon Paints, Dgl Camel, and PPG. |
|
4, Currently, Many paint/Coating manufacture will choose Chinese Products. To be honest, Chinese Product also have stable quality and the same performance VS the International products.The other things, Cost-effective for the end users. |
Matting Agent For Plastic Coatings,Plastic Coatings Chemical,White Powder Matting Agent,High Matting Effect Matting Agent
Guangzhou Quanxu Technology Co Ltd , https://www.skyelecteflonheater.com