1. Hand crank: This is the core component and power source of the drying rack. Shake the hand crank to drive the lifting and lowering of the clothes hanger. Required shaking and light, self-locking and reliable;
2. The angler: The intermediate device for changing the direction of the lifting rope requires a flexible rotation after the pulley is used for a long period of time; it does not get stuck and the rope does not hop;
3, the overhead device assembly: consists of two parts - the top bracket and top cover. The top support plays a functional role and the top cover plays a decorative role. The top bracket is required to be installed firmly without falling off, no rusting for a long time, flexible rotation of the pulley without catch-up, no job-hopping; the top cover requires no rust, peeling, fade or leg color for a long time;
4. Clothes rail: This is a part that needs to pay attention to the appearance. The clothes are hung on this part and it is very attractive. Therefore, it is required to have sufficient rigidity (that is, it will not bend) and it must have a good surface treatment. (beautiful, long-term stable, resistant to dust, comfortable to feel); now made of aluminum alloy;
5, lifting rope: This is an important part of the link hand crank and clothes hanger rod, requires no rust, continue to share, not hard. Generally used 7*7, diameter 1.2 ~ 1.8mm metal rope (the earliest use is galvanized iron wire, now use fake stainless steel wire rope, very rarely use standard stainless steel).
6, hanging ball: lifting rope and clothes rod connection, requiring connection is convenient, reliable, but also have at least the appearance. Generally made of aluminum alloy.
7, tube sets: clothes hanger rod because it is hollow, the end does not look good, so we must have a cover. Required size is not easy to lose.
8, clothing support: is a small hanger hanging on the clothes pole, a set of drying racks with 12 to 18, most of the plastic production, very few high-grade aluminum alloy production.
2. The angler: The intermediate device for changing the direction of the lifting rope requires a flexible rotation after the pulley is used for a long period of time; it does not get stuck and the rope does not hop;
3, the overhead device assembly: consists of two parts - the top bracket and top cover. The top support plays a functional role and the top cover plays a decorative role. The top bracket is required to be installed firmly without falling off, no rusting for a long time, flexible rotation of the pulley without catch-up, no job-hopping; the top cover requires no rust, peeling, fade or leg color for a long time;
4. Clothes rail: This is a part that needs to pay attention to the appearance. The clothes are hung on this part and it is very attractive. Therefore, it is required to have sufficient rigidity (that is, it will not bend) and it must have a good surface treatment. (beautiful, long-term stable, resistant to dust, comfortable to feel); now made of aluminum alloy;
5, lifting rope: This is an important part of the link hand crank and clothes hanger rod, requires no rust, continue to share, not hard. Generally used 7*7, diameter 1.2 ~ 1.8mm metal rope (the earliest use is galvanized iron wire, now use fake stainless steel wire rope, very rarely use standard stainless steel).
6, hanging ball: lifting rope and clothes rod connection, requiring connection is convenient, reliable, but also have at least the appearance. Generally made of aluminum alloy.
7, tube sets: clothes hanger rod because it is hollow, the end does not look good, so we must have a cover. Required size is not easy to lose.
8, clothing support: is a small hanger hanging on the clothes pole, a set of drying racks with 12 to 18, most of the plastic production, very few high-grade aluminum alloy production.
Injection Molding Service,Aerospace Connector,Connectors Injection Molding,Electric Tools Plastic Part
Wisegroup Precison Mold Ltd , https://www.wisegroupasia.com