- Model NO.: YB-50/65/80/100
- Type: Vane Pump
- Performance: Explosion
- Place of Origin: Zhejiang China (Mainland)
- Name: Yb Vane Pump/ Vane Truck Pump /Fuel Dispenser Pump
- Transport Package: Wooden Cases
- Origin: Zhejiang, China
- Acting Form: Single-Acting
- Displacement: Variable Pump
- Certification: ISO
- Model Number: Yb-50/80/100
- Trademark: JIASONG
- Specification: SGS
- HS Code: 8413810090
YB series self-priming rotary vane pump is with by-pass valve built-in. The pump uses a rotor with sliding vanes to drive the liquid transfer. The material of construction is nodular cast iron with self-lubricating vanes. Due to its superior performance, the pump can handle viscous and volatile liquid and require less horsepower than other equivalent pumps. The pump has its obvious advantage in the transmission of high flow at low revolution.
Application
Oil tank truck
Fleet refueling.
Lube oil
Aviation refuelers
Transmission of petrochemicals, gasoline, diesel, biofuel, solvent, etc.
Installation
With cardan shaft or hydraulic motor, the pump can be installed on oil tank trucks. And also it can be installed on metal baseplates with motor or diesel engine, using for high flow fuel dispensers and floating fuel equipments which are compose of pumps and flowmeters. Equipped with Teflon seals, the pump can also transfer a wide variety of solvent in the petrochemical industry.
| Model | Size/Flow Rate/Speed | 650 RPM | 600RPM | 550 RPM | 500 RPM | 450 RPM | 400 RPM | ||||||
| G/min | L/min | G/min | L/min | G/min | L/min | G/min | L/min | G/min | L/min | G/min | L/min | ||
| YB-50 | 50mm/2'' | 80 | 300 | 72 | 270 | 64 | 240 | 56 | 210 | 48 | 180 | 40 | 150 |
| YB-65 | 65mm/2.5'' | 132 | 500 | 123 | 465 | 114 | 430 | 103 | 390 | 93 | 350 | 82 | 310 |
| YB-80 | 80mm/3'' | 265 | 1000 | 243 | 920 | 222 | 840 | 200 | 760 | 180 | 680 | 160 | 600 |
| YB-100 | 100mm/4'' | Â | Â | Â | Â | Â | Â | 505 | 1900 | Â | Â | 405 | 1530 |
| Model | YB-50 | YB-65 | YB-80 | YB-100 | |
| Rated Speed | 640RPM | 640RPM | 640RPM | 640RPM | |
| Power | HP | 3.0 | 5.0 | 10 | 25 |
| KW | 2.2 | 4 | 7.5 | 18.5 | |
The Flange Fitting is pipe connector with flange.
It is used for connection of pipe to pipe, pipe to ending device, like oil outlet, gas outlet, polymer outlet and water outlet.
The flange can be choosed according to the situation of installation.
The flange can be raised face slip flange,plated style flange, welding neck flange, socket welding flange,
threaded flange, blind flange, spectacle blind flange.
The material of flange is stainless steel, 316L.
Flange Connector,Connector With Fixing Flange,Flange Ending Joint Connector,Rtp Ending Flange Connector
Changchun Gaoxiang Special Pipes Co., Ltd. , http://www.golsunpipe.com