Reliable J&O® Brand ®
Over 10 years Exporting Experiences
ISO9001,3A, FDA Certification
High Pressure 316 Stainless Steel Reducer Tube Fitting
Product Features
1.Twin ferrule fittings provide metal-to-metal seal connections, non-elastomeric seals for leak-free connections.
2.Twin ferrule fittings is designed to have a maximum allowable working pressure that is higher than  that of any tubing.
3.Stainless steel tube harderness: the hardness of the tube shall be not greater than 85 HRB.
4.Available in sizes from 1/16 to 2in and 2 mm to 50 mm.
5.Fittings materials include 316 stainless steel, steel, brass, aluminum, nickel-copper, Hastelloy C, Â 6Mo, Incoloy 625 and 825.
6.Special treated Back ferrule is to provide secure.
7.Silver coated threads to reduce galling.
8.Leak-proof joints capable of satisfying high pressure vacuum and vibration applications.
9.Industry standard design for all instrumentation grade tubing.
Product Performance
1.Hydraulic proof pressure test (1.5 times the maximum permissible working pressure): no leakage.
2.Dismantling and reassembly test (dismantle ten times): no leakage.
3.Vacuum test (1 × 10−4 mbar or greater): the leak rate less than 1 × 10−8.
4.Maximum static gas pressure test (with nitrogen gas to 150% of pressure rating): no visible bubbles.
5.Hydraulic impulse and vibration test (the pressure impulses at between 0.5 Hz and 1.7 Hz and the vibration  at between 23 Hz and 47 Hz): no leakage.
6.Thermal cycle test (ambient to +80 °C and then to -25 °C with a hydrostatic pressure): no evidence of leakage.
7.Pneumatic pressure vibration test (The frequency of vibration shall be set at 45 Hz and complete 20 × 106  cycles): without failure
8.Fire test (in accordance with BS ISO 19921): no leakage.
9.Corrosion resistance test (the duration of exposure at least 168 h): no visible evidence of corrosion.
10.Deep water submersion test (equivalent to 3048 m of sea water): no helium detected.
11.Minimum hydrostatic pressure test (four times the maximum permissible ambient pressure rating): no  leakage.Â
We can supply:
J&O Valves including Sanitary Butterfly Valve, Sanitary Ball Valve, Mixing Proof Valve, Divert Valve, Check Valve and Diaphragm Valves, as well as Various Tank Accessories: Sampling Valve, Safety Valve, Relief Valve, Manhole Way, Sight Glass, Strainers/Filter, Cleaning Ball, And other Pipe Fittings, (Pipe Unions: SMS, DIN, IDF, RJT,3A; Fittings: Elbow, Tee, Reducer), each products are tested well by our strictly Quality Control System, and we also have excellent service to support you and promote your business.
Â
Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FEDEX, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
Â
Our Service:
About payment:
Payment methods: L/C, T/ T, Western Union
About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: by sea, by air or by express. Any question about samples, please contact us.
For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: by sea, by air, by express ect. Save your cost is our mission.
Warranty:
Any question or problem will be respond within 24 hours.
Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be half price in lifetime.
Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you.
Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
Integrity: All the warranty and guarantee from us will be put into come true
 J&O FLUID CONTROL CO., LIMITED
Reliable J&O® Brand ®
Over 10 years Exporting Experiences
ISO9001,3A, FDA Certification
High Pressure 316 Stainless Steel Reducer Tube Fitting
Product Features
1.Twin ferrule fittings provide metal-to-metal seal connections, non-elastomeric seals for leak-free connections.
2.Twin ferrule fittings is designed to have a maximum allowable working pressure that is higher than  that of any tubing.
3.Stainless steel tube harderness: the hardness of the tube shall be not greater than 85 HRB.
4.Available in sizes from 1/16 to 2in and 2 mm to 50 mm.
5.Fittings materials include 316 stainless steel, steel, brass, aluminum, nickel-copper, Hastelloy C, Â 6Mo, Incoloy 625 and 825.
6.Special treated Back ferrule is to provide secure.
7.Silver coated threads to reduce galling.
8.Leak-proof joints capable of satisfying high pressure vacuum and vibration applications.
9.Industry standard design for all instrumentation grade tubing.
Product Performance
1.Hydraulic proof pressure test (1.5 times the maximum permissible working pressure): no leakage.
2.Dismantling and reassembly test (dismantle ten times): no leakage.
3.Vacuum test (1 × 10−4 mbar or greater): the leak rate less than 1 × 10−8.
4.Maximum static gas pressure test (with nitrogen gas to 150% of pressure rating): no visible bubbles.
5.Hydraulic impulse and vibration test (the pressure impulses at between 0.5 Hz and 1.7 Hz and the vibration  at between 23 Hz and 47 Hz): no leakage.
6.Thermal cycle test (ambient to +80 °C and then to -25 °C with a hydrostatic pressure): no evidence of leakage.
7.Pneumatic pressure vibration test (The frequency of vibration shall be set at 45 Hz and complete 20 × 106  cycles): without failure
8.Fire test (in accordance with BS ISO 19921): no leakage.
9.Corrosion resistance test (the duration of exposure at least 168 h): no visible evidence of corrosion.
10.Deep water submersion test (equivalent to 3048 m of sea water): no helium detected.
11.Minimum hydrostatic pressure test (four times the maximum permissible ambient pressure rating): no  leakage.Â
We can supply:
J&O Valves including Sanitary Butterfly Valve, Sanitary Ball Valve, Mixing Proof Valve, Divert Valve, Check Valve and Diaphragm Valves, as well as Various Tank Accessories: Sampling Valve, Safety Valve, Relief Valve, Manhole Way, Sight Glass, Strainers/Filter, Cleaning Ball, And other Pipe Fittings, (Pipe Unions: SMS, DIN, IDF, RJT,3A; Fittings: Elbow, Tee, Reducer), each products are tested well by our strictly Quality Control System, and we also have excellent service to support you and promote your business.
Â
Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FEDEX, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
Â
Our Service:
About payment:
Payment methods: L/C, T/ T, Western Union
About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: by sea, by air or by express. Any question about samples, please contact us.
For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: by sea, by air, by express ect. Save your cost is our mission.
Warranty:
Any question or problem will be respond within 24 hours.
Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be half price in lifetime.
Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you.
Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.
Integrity: All the warranty and guarantee from us will be put into come true
Â
Injection molding is the most commonly used manufacturing process for Plastic Parts. The use of injection molding to manufacture various products varies greatly in size, complexity and application. The injection molding process requires the use of injection molding machines, raw plastic materials and molds. The plastic is melted in an injection molding machine and then injected into a mold, where it cools and solidifies into the final part. Injection molding is used to produce thin-walled plastic parts for various applications, the most common of which is the plastic shell. Plastic shell is a thin-walled shell, which usually needs many ribs and protrusions indoors. It is used for various kinds of electric appliances, including electric tools, instrument panels, and consumer electronics. Other common thin-walled products include different types of open containers, such as barrels. Injection molding is also used to produce several daily necessities, such as toothbrushes or small plastic toys. Many medical devices, including valves and syringes, are also manufactured using injection molding
Vacuum Cleaner Accessories,Vacuum Cleaner Parts Accessories,Dry Vacuum Cleaner Accessories,Vacuum Cleaner Replacement Accessory
Suzhou Dongye Precision Molding Co.,Ltd. , https://www.dongyeinjectionmolding.com