High Pressure Pneumatic Lower Price Good Quality Ship Launching Marine Rubber Airbags for Vessels, Boats Launching, Landing, Heavy Lifting

1. Ship Launching Marine Rubber Airbags will provide you with a unique capability of land transport very large vessels, heavy loads or heavy construction over ground where terrain would otherwise prevent such an operation. The Evergreen have wide ship launching marine rubber airbags in capacities from 70 tons to 380 tons per bag. Evergreen also has a selection of bags with diameters up to 2m in diameter and up to 20m in length to cover virtually all applications.

2. The current over ground transportation capacity is 10, 000 tons.
The deflated Evergreen ship launching marine rubber airbags are very flat and can be placed under a grounded or stranded vessel which is hard aground. In a shipyard transportation or launching application as little as 12 inches will provide very quick placement of the Evergreen ship launching marine rubber airbags under a hull. The Evergreen ship launching marine rubber airbags operate with very low pressure, 7 10 PSI, which is controlled by a custom EVEGREEN designed air manifold which can operate all Evergreen ship launching marine rubber airbags simultaneously or individually.

EVERGREEN also provides necessary air compressors, manifold, hoses, support equipment and expertise with all air bag operations

3. Construction Features:

Evergreen ship launching marine rubber airbags, basic body consists of which consist of our rubber layers, synthetic-cord-reinforced rubber layers, are kind of a cylindrical airbags with hemispherical heads at the both ends. All of these are vulcanized together, and then compress air inside to enable in to roll.

1). Outer Rubber
The outer rubber layer that covers the outside of ship launching marine rubber airbags protects the cord layers from abrasion and other external forces. This compound has sufficient tensile and tear strength to withstand any weather condition and hard usage. Standard color is black.

2). Synthetic-tyre-cord layer for reinforcement
The reinforcement cord layers, which are made of Synthetic-tire-cord commonly used in tires, are arranged at ideal angles to hold the internal pressure and to distribute the stress evenly providing strong efficient reinforcement.
(To know the detailed technology parameter, please refer Material Selection. )

3). End Fittings
End fittings include air tightness swivel and airbags safety air inlet.

4. Classification:

1). The standard specification of Evergreen ship launching marine rubber airbags
You can choose the required diameter and effective length to meet your projects.
Diameter (D): It's from 0.8m to 2.0m.
Effective Length (EL): It's from 6m to 18m.
Total Length (TL): It's from 7m to 19.5m
The above specification only is our standard specification arrange. Other specification also can be supplied upon clients' request.

2). The standard number of layers of ship launching marine rubber airbags
We define the number of layer, which means the number of Synthetic-tyre-cord layer, in order to confirm the Safety Working Pressure. Normally, our airbags include 4, 5, 6, 7, 8 layers types. Other type is available upon clients' request.

3). The material of Evergreen ship launching marine rubber airbags
There're two kinds of synthetic-tire-cord because of the different performance.

ItemUnit1260 dtex/21870 dtex/2
Break StrengthN/ strand≥ 215.6≥ 284.2
Diametermm0.65 ± 0.050.74 ± 0, 05
Adhesion StrengthN/cm≤ 137.2≤ 156.8

Pilot Control Devices

Pilot Control Devices,Pilot Control Valve,Pilot Control Element,Hydraulic Directional Control Valve

Zhejiang Haihong Hydraulic Technology Co.,Ltd. , https://www.haihong-hydraulic.com