Every family, restaurant, canteen in the world produces food waste continuously every day. It may not be too tiring to rely on manual cleaning of kitchen waste in every small kitchen of every household, but it is large in supply and efficiency. It is obviously unscientific that restaurants, cafeterias, and restaurants in the kitchen are still pointing to the kitchen aunts to clean them little by little. At this time, it is necessary to extensively use kitchen garbage trucks to increase the efficiency of kitchen work.
The kitchen garbage truck is a sort of garbage truck and is a special vehicle used for collecting and transporting domestic garbage and food garbage, and at the same time, it can also clean up urban sludge. It is widely welcomed in the market for its features such as high degree of automation, tight sealing, easy operation, no leakage of effluent, and unpleasant odor.
At the same time, although the kitchen garbage truck is easy to operate, it still needs to be learned for those who are using it for the first time. Here are some points to note about how to use the kitchen garbage truck.
First, the kitchen garbage truck should be preheated during the cold start. It is better to warm the table pointer to the middle of the tick mark during the cold start. At the same time, the water temperature should reach 40°C or higher. After the cold start is completed, it can start slowly. On the road.
Second, avoiding emergency brakes will not work. Regardless of the type of vehicle being driven, frequent braking is not always a good habit, especially for kitchen garbage trucks, which will cause a greater impact on the engine, brake system, and chassis. Traffic should be handled well in advance to reduce deceleration; if there is a sudden need for emergency braking, you should first depress the clutch pedal to minimize the impact on the kitchen garbage truck engine damage.
Third, kitchen garbage trucks cannot be fully loaded or even overloaded. Whether it is full or overloaded, it will cause great damage to its parts, and overloading the loading will also cause inconvenience to exercise, and even cause leakage of garbage inside. Therefore, it is necessary to reduce the load according to the weight of each model, and it is best not to exceed it. 70% of the stated load.
Deutz Engine Part 02235338 Oil Cooler Fl914,Oil Cooler 02235338,Deutz Oil Cooler Oem No 02235338 F4L912
ACRO (TIANJIN) INTERNATIONAL TRADE CO., LTD , https://www.acrospareparts.com