Technical Parameters:
| 1 | Max. Coil Width: | 1000 mm | |||
| 2 | Material Thickness: | 0.3-0.6 mm | |||
| 3 | Raw Material: | Prepainted sheet, galvanized sheet, aluzinc sheet | |||
| 4 | Yield strength: | 235 Mpa | |||
| 5 | Curving speed: | 12m/min | |||
| 6 | Voltage: | 380V/50Hz/3PHÂ Control:Â ACÂ 220V/DCÂ 24VÂ | |||
| 7 | Total Power: | About 7.45KW  (Up to final design) | |||
| 8 | Main motor: | 0.95kW | |||
| 9 | Hydraulic station: | 5.5KW | |||
| 10 | Feeding servo Motor: | 1kW | |||
| 11 | Max. Curving degree: | 120° | |||
| 12 | Curving die: | Cr12, HRC58-62, harden treatment, with hard chrome | |||
| 13 | Required Worker: | 1 persons | |||
| 14 | Dimension | About 2.5*1.7*1.5m | |||
Work Flow:
Feeding→ Curving→ Output
EQUIPMENT LIST:
| 1 | Bending mould | 2 sets | |||
| 2 | Frame | 1Â set | |||
| 3 | Auto Feeding | 1 set | |||
| 4 | Auto Curving | 1 set | |||
| 5 | Oil cylinder | 1 set | |||
| 6 | Hydraulic station | 1 set | |||
| 7 | Main Motor | 1 set | |||
| 8 | Machine Base | 1 set | |||
| 9 | Mould Core | 2 sets | |||
| 10 | Electric control system | 1 set | |||
Â
ThermicTransfer has 14 years of experience in R&D and production of engine radiators. The long-term cooperation engine brands are Yanmar/Cummins/Deutz/Perkins/Kubota/Isuzu/Mitsubishi/MTU. Our experience is based on the engine power provided by the purchaser. Performance curve, single heat dissipation or multiple combined heat dissipation requirements, we simulate the calculation of heat dissipation requirements, and design a three-dimensional cooler solution according to the engine size combined with the installation environment, provide customers with three-dimensional model confirmation, and provide performance parameter reports through simulation calculation. Finally, according to the customer's suggestion to adjust and optimize, form an effective program. We will then provide samples for performance testing, mass production through long-term performance, stress testing, resistance testing, etc.
At present, we design up to 5 combined Heat Exchangers for construction machinery, including two oil coolers, water cooler, Intercooler, and fuel heat exchanger.
Engine Heat Exchanger,Marine Engine Heat Exchanger,Marine Heat Exchanger,Fireplace Heat Exchanger
Xinxiang Zhenhua Radiator Co., Ltd. , https://www.thermal-manage.com