I. INTRODUCTION The good quality of lubricating oil is a necessary condition for the normal operation of machinery. The quality of lubricating oil should be tested randomly to detect abnormalities in a timely manner and change the oil at a reasonable and timely time. The oil analyzer can accurately judge the quality of lubricants used in the production site, realize timely measurement and oil change, ensure normal operation of various types of machinery and equipment, and prolong service life.
Second, FCU series oil analyzer performance characteristics and composition FCU2210 series oil analyzer is a high-performance automation instrument application ISO4406 standard and NAS1638 standards for the use of lubricants in the purity of automatic measurement analysis, online testing, also Can be sampled and detected, the operator according to its man-machine dialogue operation panel mode setting, the system will automatically complete the data analysis, display, with storage and printing capabilities, but also with the computer and PLC communication.
FCU2210 series oil analyzer with keyboard, liquid crystal display LCD, dot matrix printer, control relay output and RS232 interface. The entire unit has a high-voltage input coupler for connection to the pressure system, a quick-disconnect suction pump inlet and a quick-disconnect coupler for recirculation from the test sample, and a flow control valve. Adjusts the current measured flow and pressure fluctuations, it protects the detected oil from contamination by a filter, and is environmentally friendly.
Third, the working principle The measured flow of oil is detected through an optical sensor (1), the sensor includes an infrared semiconductor LED (2) and a diode receiver (3). The contaminant particles generated by the friction of the components in the oil, which are immersed in the oil, attenuate the light in a pulsed manner. The system then sorts and counts the size of the particles by a PLC module (4) based on the measurement signal.
The measurement of oil purity is related to the flow rate. The flowmeter collects the signal to the PLC module (4). The module continues to measure the number of particles. The measurement signal from the optical sensor and the flowmeter (5) is based on the NAS or ISO standard at every 100ml. The basic provisions of the reference amount of purity are calculated. Instant measurement of measurement results is stored in the PLC module with real-time clock and memory function.
The ball valve of the analyzer is used for the switch selection of the inlet and the inlet of the pump. The pump is only used for the sampling measurement from the sampling bottle when there is no pressure. The flow setting valve (800mlmin) and the accumulator can be connected to the 1-35Mpa on-line pressure range at the pressure inlet.
Under normal circumstances, the FCU2210 series online automatic detection of the oil analyzer can display the following information on the LCD panel:
Mode selection method, current flow rate, current ISO (NAS) level, ISO (NAS) flow rate classification trend, error information, etc.
1-sensor 2-LED display 3-diode receiver 4-PLC module 5-flow meter 6-display panel 7-flow control valve 8-filter 9-flow setting valve 10-pressure setting valve 11-RS232 interface 12 - Keyboard 13 - Relay 14 - Printer 15 - Accumulator 16 - Pump 17 - Ball Valve Fig.1 Principle diagram of FCU2210-4 oil quality analyzer IV. Effect Before our factory applied the domestic oil quality analyzer, we first tested the pure lubricating oil, then wiped the sensor piece, poured the sampled lubricating oil, and compared the sensing coefficient. There are often drawbacks of large errors and inconvenient operations. Since 2002, our factory has used the FCU2210-4 type automatic oil analyzer to detect the oil quality of the lubricant at random during the operation of the machine. The operation is simple, the precision is high, the data output can be performed at any time, and the advantages of automatically classifying oil grades can be achieved. Increased the effective operation rate of rolling machinery.
Second, FCU series oil analyzer performance characteristics and composition FCU2210 series oil analyzer is a high-performance automation instrument application ISO4406 standard and NAS1638 standards for the use of lubricants in the purity of automatic measurement analysis, online testing, also Can be sampled and detected, the operator according to its man-machine dialogue operation panel mode setting, the system will automatically complete the data analysis, display, with storage and printing capabilities, but also with the computer and PLC communication.
FCU2210 series oil analyzer with keyboard, liquid crystal display LCD, dot matrix printer, control relay output and RS232 interface. The entire unit has a high-voltage input coupler for connection to the pressure system, a quick-disconnect suction pump inlet and a quick-disconnect coupler for recirculation from the test sample, and a flow control valve. Adjusts the current measured flow and pressure fluctuations, it protects the detected oil from contamination by a filter, and is environmentally friendly.
Third, the working principle The measured flow of oil is detected through an optical sensor (1), the sensor includes an infrared semiconductor LED (2) and a diode receiver (3). The contaminant particles generated by the friction of the components in the oil, which are immersed in the oil, attenuate the light in a pulsed manner. The system then sorts and counts the size of the particles by a PLC module (4) based on the measurement signal.
The measurement of oil purity is related to the flow rate. The flowmeter collects the signal to the PLC module (4). The module continues to measure the number of particles. The measurement signal from the optical sensor and the flowmeter (5) is based on the NAS or ISO standard at every 100ml. The basic provisions of the reference amount of purity are calculated. Instant measurement of measurement results is stored in the PLC module with real-time clock and memory function.
The ball valve of the analyzer is used for the switch selection of the inlet and the inlet of the pump. The pump is only used for the sampling measurement from the sampling bottle when there is no pressure. The flow setting valve (800mlmin) and the accumulator can be connected to the 1-35Mpa on-line pressure range at the pressure inlet.
Under normal circumstances, the FCU2210 series online automatic detection of the oil analyzer can display the following information on the LCD panel:
Mode selection method, current flow rate, current ISO (NAS) level, ISO (NAS) flow rate classification trend, error information, etc.
1-sensor 2-LED display 3-diode receiver 4-PLC module 5-flow meter 6-display panel 7-flow control valve 8-filter 9-flow setting valve 10-pressure setting valve 11-RS232 interface 12 - Keyboard 13 - Relay 14 - Printer 15 - Accumulator 16 - Pump 17 - Ball Valve
juicer blender , blender 3 in 1 , blender 2 in 1, food processor
Jiangmen Taifai Technology Co.,Ltd , https://www.glaremecn.com