1. The material of the scraper casing is 304 stainless steel, the thickness is: cover / side plate / guide / bottom = 3mm / 4mm / 6mm / 8mm, scraper is made of plate chain chain material is 304 stainless steel, scraper chain The scraper material is 10mm nylon plate, the head and tail wheel materials are 304 stainless steel, the head and tail shaft materials are 304 stainless steel, and the upper and lower wear rail materials are 304 stainless steel. Multiple inspection and cleaning ports are required.
2. The welding of the scraper and the connecting rod is not allowed to have defects such as cracks, slag inclusions, unwelded welding, and incomplete penetration. The weld bevel should meet the requirements of GB985. After welding, insulation measures are taken to anneal and eliminate welding stress; The seam strength is not less than 400 MPa.
3. The cumulative error of the length of the conveyor chain should be 0-0.25% of the test length.
4. The bridge between the middle of the wear-resistant rail of the buried scraper conveyor and the floor is plug welded, and the two sides of the guide rail are intermittently welded to ensure the welding of the guide rail is firm and reliable.
5. The buried scraper conveyor is well sealed, the material must not leak during the conveying process, and the discharge port is not blocked. The specific sealing method is as follows: the whole machine adopts the double sealing method: on the one hand, the high temperature asbestos rubber sheet XB450 is used as the sealing strip, which can prevent rain and dust; on the other hand, it is coated with the high temperature resistant sealant on the casing and asbestos. The rubber sheet and the flange joint surface prevent leakage. The rotating position of the head and tail is sealed with an adjustable packing to prevent dust leakage and ensure good sealing performance. The buried scraper transports the outside of the casing to allow water to rinse.
6. When the load of the buried scraper conveyor is running, the maximum noise level at 1m around the giant scraper shall not exceed 85dB(A).
The trends of the Horizontal Metal briquetting recycling industry
As a result of machining, a vast amount of metal scrap chips are formed. These metallic chips can be directly pressed into briquettes by using a metal briquetting press and recycled by melting.
Recycling metals also requires less energy than producing new metals. Also conserves natural resources. Recycling conserves diminishing natural resources.
It`s much more affordable to resue the metal chips that you have by building an effective recycling system, using the Horizontal Metal Chip Briquetter to do that, Most companies recycle on the basis that it`s cheaper to do so.
What is the role of a Horizontal metal briquetting press in Metal recycling?
The Horizontal Metal Briquetting Press Machines increase the value of different kinds of metal chips, loose turnings and swarf by compressing them into near solid, dry briquettes for scrap metal recycling to send to the recycler or feed to the furnace.
The Horizontal Metal Scrap Briquetting Press makes your metal recycling more efficient and profitable.
How to choose a suitable metal briquetting press?
The Y83 series metal scrap briquetting press is used to pressing various metal shavings into high-density metal briquettes, which can press various metal shaving materials such as steel shavings, aluminium shavings, copper shavings, cast-iron shavings, bronze shavings and so on.
With high-density compression, compact and strong. Low energy consumption but fast production rate.
The Y83 series hydraulic briquetting press is divided into Y83 conventional structure, Y83L pre-pressing structure, Y83W horizontal structure, YW1 and YW2 horizontal structure.
Y83-Vertical Metal Briquetting Press (Conventional structure)
Y83L-Vertical Metal Briquetting Press (Pre-pressing structure)
Y83W-Horizontal Metal Briquetting Press (Horizontal structure)
YW1-Horizontal Metal Briquetting Press (Horizontal structure)
YW2-Horizontal Metal Briquetting Press (Horizontal structure)
We provide a variety of models of the Aluminum Metal Briquetting press Machine, With new technologies to raise the quality and reduce the price, which supports 24 hours fully automatic working environment.
YMSRECYCLING offer economical and effective solutions to help you to process different metal scraps.
The Automatic Aluminum Briquetting Press can be customized and extended according to the actual needs of your on-site.
CONTACT YMSRECYCLING
Call us now on +86-15950122559
To start maximising your returns from your aluminum metal recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.
Horizontal Metal Briquetting Press,Horizontal Metal Chips Briquetting Press,Horizontal Metal Chip Briquetter,Horizontal Steel Briquetting Machine,Horizontal Scrap Briquetting Press
Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com