1. The material of the scraper casing is 304 stainless steel, the thickness is: cover / side plate / guide / bottom = 3mm / 4mm / 6mm / 8mm, scraper is made of plate chain chain material is 304 stainless steel, scraper chain The scraper material is 10mm nylon plate, the head and tail wheel materials are 304 stainless steel, the head and tail shaft materials are 304 stainless steel, and the upper and lower wear rail materials are 304 stainless steel. Multiple inspection and cleaning ports are required.
2. The welding of the scraper and the connecting rod is not allowed to have defects such as cracks, slag inclusions, unwelded welding, and incomplete penetration. The weld bevel should meet the requirements of GB985. After welding, insulation measures are taken to anneal and eliminate welding stress; The seam strength is not less than 400 MPa.
3. The cumulative error of the length of the conveyor chain should be 0-0.25% of the test length.
4. The bridge between the middle of the wear-resistant rail of the buried scraper conveyor and the floor is plug welded, and the two sides of the guide rail are intermittently welded to ensure the welding of the guide rail is firm and reliable.
5. The buried scraper conveyor is well sealed, the material must not leak during the conveying process, and the discharge port is not blocked. The specific sealing method is as follows: the whole machine adopts the double sealing method: on the one hand, the high temperature asbestos rubber sheet XB450 is used as the sealing strip, which can prevent rain and dust; on the other hand, it is coated with the high temperature resistant sealant on the casing and asbestos. The rubber sheet and the flange joint surface prevent leakage. The rotating position of the head and tail is sealed with an adjustable packing to prevent dust leakage and ensure good sealing performance. The buried scraper transports the outside of the casing to allow water to rinse.
6. When the load of the buried scraper conveyor is running, the maximum noise level at 1m around the giant scraper shall not exceed 85dB(A).
The trends of the Steel recycling industry
Steel is a permanent material that can be infinitely recycled and is 100% recyclable without loss of quality.
All the available scrap is recycled over and over again to create new steel. Recycled steel maintains the inherent properties of the original steel and the quality can also be improved on recycling.
What is the role of Metal Baler in Steel recycling?
The Steel Baler machines make your metal recycling more efficient and profitable.
Through the process of baling, save the cost of storage and transportation of waste, improve the melting efficiency of the furnace and so on, Turn your steel waste into earnings.
Recycling metals also requires less energy than producing new metals.
Also conserves natural resources. Recycling conserves diminishing natural resources.
How to choose a suitable metal baler?
The Y81 series Steel Industrial Metal Baler could press all ferrous metals from steel to stainless steel can be recycled as well as non-ferrous metals such as copper, brass, and aluminium, with various sizes for option, high-density compression, compact and strong. Low energy consumption but fast production rate.
Y81 series hydraulic metal baler mainly include the following models.
Y81F (side turn discharge ), Y81T (side push discharge), Y81Q (front push discharge) and Y81S (Double main press ).
We also support the design and manufacture of other model versions upon request.
Y81Q-Manual operation (Front push discharge )
Y81F-Manual operation (Side turn discharge )
Y81F-Semi-automatic operation (Side turn discharge )
Y81T-Semi-automatic operation (Side push discharge )
Y81S-Semi-automatic operation (Double main press discharge )
We provide a variety of models of the Steel Scrap Metal Baler Machine, With new technologies to raise the quality and reduce the price, which supports 24 hours fully automatic working environment.
YMSRECYCLING offer economical and effective solutions to help you to process different metal scraps.
The Metal Baling Press can be customized and extended according to the actual needs of your on-site.
CONTACT YMSRECYCLING
Call us now on +86-15950122559
To start maximising your returns from your metal scrap recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.
Steel Baler,Steel Scrap Metal Baler Machine,Steel Industrial Metal Baler,Steel Metal Scrap Baler
Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com