Features:
*Specially applied to refueling for train and large ship
*Flow meter performs well,with ±0.25% accuracy
*Electrically droved valve works steady in dirty liquid
*Double stage filter system keeps the fuel clean and prolongs the life time for flow meter
*Card authorization for work staff
*ARM electronic system, display for density, kilogram,liter.
*For diesel only.
Technical specifications:
| Accuracy for the unit | ±0.25% |
| Flow rate | 300~ 500L/min |
| Ambient temperature | -35ºC~ +55ºC |
| Relative humidity | 20% - 95% |
| Unit noise rate | < 70dB; |
| Inlet vacuum rate for suction pump | >=54Kpa |
| Communication | With RS 485 port, or current loop |
| Power supply |
AC 220V(  -15%~+10%),(50/60±1)Hz; AC 380V( -15%~+10%); (50/60±1)Hz |
| Digit of sale | 7digits (decimal points can be adjusted ) |
| Digit of volume | 6digits (decimal points can be adjusted ) |
| Digit of unit price | 5digits (decimal points can be adjusted ) |
| Totalizer of sale | 0~42949672.95Â |
| Totalizer of volume | 0~42949672.95Â |
Basic Configurations:
Main board, power board, display board, keypad, control board, flow meter, electrical drove valve, electromagnetic counter , filter, nozzle, hose
Optional Configuration:
Pump, motor, Card reader payment, mass flow meter,heater for ultra low temperature, connected to FMS, standard electronics interface to POS and automation fuel management system
About Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.
SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.
All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.
With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China
.
Â
At present. The mechanical arm is more and more using ceramic as raw materials, small ceramic arms is generally using zirconia ceramic, because it has the characteristics of anti impact, abrasion resistance, while large ceramic arms will generally use 99% alumina to reduce the weight of components.
The main characteristics of the Ceramic Arm are:
1. high hardness, high wear resistance, good heat resistance, excellent mechanical properties and corrosion resistance.
2. ceramic is still a good insulating material under the high temperature environment.
3. density is low and the weight of the component can be reduced.
Ceramic arm is mainly used as spare parts for semiconductor manufacturing, comminuted media and high temperature resistant components, which are generally used in the LED industry and solar photovoltaic industry. It can adapt to various environment, such as high temperature, strong acid and alkali, high pressure, vacuum and other environment, chemical properties are stable
Ceramic Arm
Ceramic Arm,Semiconductor Ceramic Arm,Ceramic Holder Arm,Ceramic Holder
Dongguan Mingrui Ceramic Technology Co.,Ltd , http://www.mr-ceramics.com