There are several ways to develop LED advertising vehicles

For users, the requirements for LED advertising vehicles are not the same. Advertising only needs to face the audience. The best performance is to face the audience. It is flexible, the rural venue is narrow, and the rear end is best for the audience without reversing the vehicle. . In the following situations, Hongyu has developed a stage vehicle for development . The first is the side deployment, the second is the expansion of the two sides, and the third is the development of three sides. There are many ways in which stage cars can be unfolded. Under normal circumstances, there are three types:
First, the side is unfolded on the side of the stage, and the platform is on the side, which can be divided into three types. 1, One-side car exhibition is launched into a stage, the top is lifted halfway, the top and the box are at a 90 degree angle, and 2 is the top half lift. A carriage lifted up with the top and leveled with the carriage. The built-in stage board unfolded to form the stage. 3. The top can be raised and lowered, and the top of the box can be lifted and lowered along with the top. The built-in stage board is staged. . The side is mostly used for product sales, advertising, etc.
Second, two-sided expansion, also divided into two kinds, 1, the stage launched on both sides, the top can be raised and lowered, the built-in stage board to form a stage, 2 is the stage launched on both sides, the built-in stage board to develop the stage, the back door to expand To form a mixing console. The two-sided expansion is mostly used for troupe performances, commercial shows and so on.
Three or three sides are unfolded, and the stage is unfolded on three sides. The top can be raised and lowered, and the back door is extended backwards to form a stage table with both sides of the built-in stage board. Three-sided development in the rural wedding and funeral market is greatly sought after!

Kneader Extrusion Line

Productivity is based on feed rate. Maintaining a constant feed, the energy-saving continuous mixer can increase the rotor speed to obtain greater shear force, or a color master batch continuous mixer, or close the discharge door slightly to increase the discharge temperature. The internal mixer operates under normal pressure to form an independent mixing environment, which is completely unaffected by the molding requirements. The high quality cable material continuous mixer can mix materials with high shear rate and temperature, and can also mix materials with low shear rate and temperature sensitivity. Granulate directly after mixing. As for the research of continuous mixer equipment, on the one hand, it will continue to focus on powdering and pelletizing technology; on the other hand, the continuous mixer of high-quality cable materials is considered to be developed for continuous use of existing large materials or high viscosity materials Mixing equipment or partial continuous mixing equipment, the configuration advantages of continuous mixers will open up new mixing fields.

Extrusion Line,Kneader Line,Kneader Extrusion,Kneader Extrusion Line

Nanjing Juli Chemical Machinery Co., Ltd. , https://www.jlextruder.com