Recently, Yukihiro Okane, the seventh-generation chief designer of Camry in the United States, revealed that: “Currently, the US (Camry) production capacity is sufficient to provide vehicles for planned sales, and the North American region is fully self-sufficient.†Currently exports from Japan to the United States The Camry only occupies the tip of the iceberg of US total sales. The company is prepared to stop exporting Camry to the United States to eliminate the loss of profits caused by the strengthening of the yen. According to Toyota data, in the first eight months of this year, 203,688 units of Camry were sold in the United States, of which 982 were exported from Japan, accounting for only about 0.5%.
Toyota plans to sell 360,000 units of Camry in the United States each year, mainly from the Georgetown, Kentucky plant. In addition, the new Camry will also be produced at the Subaru plant in Indiana. As for the Tsutsumi plant in Toyota, Japan, Aichi Prefecture will continue to manufacture Camry, and its annual output will be controlled at around 30,000, but only 6,000 of them will be for the Japanese domestic market, and the rest will be for exports.
Although Camry has a prominent position in the United States, Yukio Okakigaoka still emphasizes the status of the Japanese market: “The Camry research and development in Japan means that both design and production originated from this. Therefore, it is undoubtedly an excellent choice to manufacture Camry in Japan. Toyota will The production of the Embankment Plant made the Camry models continue to radiate to the global market.†He also revealed that Camry’s global sales target is 850,000 units, which is significantly higher than last year’s 692,000 units, but still lower than the 924,000 in 2007 due to the financial crisis. The peak level of the vehicle.
Medical Waste Treatment Equipment
Medical Waste Treatment Machine
Background:
Medical waste with strong infections, toxic and corrosive,emissions, lax management or improper handling characteristics. It could be winnowing or failure by rain leaching, causing pollution to water body, atmosphere, soil and making direct harm to human body.
In order to ensure the medical waste is timely, efficient and harmless be disposed and to prevent the spread of disease, after years of scientific research, our company designed medical waste treatment machine, which use high temperature
disinfection and sterilization of medical waste biomass decomposition of fuel oil project, can turn a thorough treatment of medical waste, saves the cost of transportation, the landfill can also be used to create higher economic benefits.
End Products Usage:
1. Fuel oil used as fuel for industries such as steel&iron factories,ceramic or chemical industries or hotels restaurants etc.
2. Carbon black be used as garden fertilizer
3. Sync Gas be recycled to heat machine
Medical Waste Treatment Machine Picture;
Advantages:
1. Integrated design of reactor and base, no civil work needed to make the installation faster and easier.
2.Sync gas purification system is designed for developed countries which has very high environmental standard. It makes the full operation process under slightly negative pressure to ensure the safety of operation. And the system removes acid content of the sync gas to ensure the production is both clean and environmental friendly.
3.National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas
and dust of the smoke through neutralization, purification and absorption, environmental friendly without pollution.
4.National Patent automatic Carbon Black Discharging System: Speedy fully
enclosed Auto-discharging under high temperature, avoiding carbon black pollution and saving time.
5.Safety aspect:Production under Slightly negative pressure, automatic
submerged welding technology, ultrasonic nondestructive testing, both manual and
automatic safety devices.
Parameters:
|
NO. |
ITEM |
Technical Parameter |
|
1 |
Door Model |
Full Open Door |
|
2 |
Suitable Raw Materials |
Medical waste |
|
3 |
Structure |
Horizontal Type Revolves |
|
4 |
Main Reactor Size |
Φ2200*6000mm Φ2600*6600mm |
|
5 |
Daily capacity |
5~6MT 8-10MT |
|
6 |
Work Pressure |
Normal Pressure |
|
7 |
Reactor Rotation Speed |
0.4R/M |
|
8 |
Power |
18-25 kw |
|
9 |
Cooling Method |
Cycle Water |
|
10 |
Type of Drive |
External Annular Gear |
|
11 |
Heating Method |
Direct Heating |
|
12 |
Type of Installation |
With Foundation |
|
13 |
Noise dB(A) |
≤85 |
|
14 |
Operating Mode |
Intermittent Operation |
|
15 |
Total Weight(MT) |
25~40Mt |
|
16 |
Installation Space Required |
30m*10m |
|
17 |
Manpower |
3~4/batch |
|
18 |
Shipment |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Medical Waste Treatment Equipment,Medical Waste To Oil Machine,Medical Waste Recycling
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com