Two wind power standards are expected to be issued in the second half of the year

On the 26th, an authoritative source from the National Energy Administration said in an exclusive interview with a reporter from the China Securities Journal that the draft standards for wind power led by the National Energy Administration had already been drafted and began to solicit opinions. Another wind power industry standard led by CEC was also close. ending. The two standards for the wind power industry are expected to be released in the second half of the year.

According to this person, the wind power industry standards formulated by the National Energy Administration mainly focus on wind power technical design and equipment standards, and tend to become industry standards. The wind power standard formulated by the CEC focuses on the details of the wind power grid connection. After the initial draft is formed, it will be reported to the National Standardization Committee and is expected to form a national standard. Although the two standards focus on different areas, in general, the relevant provisions of national standards are lower than industry standards. The National Energy Administration will maintain communication with CEC in the near future to ensure the coherence of the two standards.

The above two standards all refer to the requirements of wind farms to ensure the stability of wind power grid-connected power in varying degrees. This means that wind farms are not only responsible for project declaration and construction, but also need to take certain responsibility for wind power grid connection and output. Experts believe that to achieve the above requirements, on the one hand, wind farms can choose to cut out wind power during the peak hours of output, and on the other hand, they can use their own energy-storage battery equipment with smooth wind power.

According to relevant experts from the Energy Bureau, it will be a general trend to require wind farms equipped with energy storage battery equipment to pass standard setting. However, it seems that the cost of deploying energy storage facilities is relatively high. If this cost is borne by the wind farm, the wind power Profit may bring a certain burden.

Clothes Printer

Heat transfer and silk screen Inkjet printing onto garments is no longer a good choice and came out of date with the digital printing technology development. Over the last few years the prints have become much more durable and the quality and wash-ability is now equal to and even better than screen printing.

From short runs or even one-off prints to large production runs,the kingmajet Jet has been proven by large and small companies choose over and over again.


We have been the leader in this technology and brought our years of digital printing experience to play when designing the Tshirt on-line

In fact, we have sold many direct to Garment Printer to the world wide and we were the pioneer company to introduce the pigment water-based white inkjet ink to the industry!


Clothes printer feature and benefit:

1. cost-effectiveness ,no printing plates, silkscreens are used, avoiding the high set-up cost of plate-making, as is necessary for traditional printing methods like screen printing.
2. instant multicolored image output ,computerized and processing all colors at one time, while screen printing can print only simple designs in a maximum of three colors and involves a separate and time-consuming step for each color to be printed.
3. allowing for on-demand printing and even a modification of the image with each impression,ideally suited for personalized printing.
4. designed for both mass production and short run production, of the same individual cost.
5. aiming at high-end products with high speed and hi-definition, Max. resolution is 2880dpi*2880dpi.
6. Professional color management system achieves the same appearance of colors when converted from different color devices to corresponding media.
7. Easy to use, requiring no technical skill to use our printer,30 minutes video training is enough for a new hand to learn to use our machine as long as he or she knows how to use a image processing software like Photoshop to create an image file.


clothes printer

Name
Clothes printer
Print head
DX5
Printer size
33*43cm(33*60cm)
Printing speed
A4 photo/111s
Printng resolution
5760*1440dpi
Nozzles
90*6=540
Interface
USB2.0
Net weight/Gross weight
55Kg/60Kg
Printer size
750*630*510mm
Height adjustment
Automatic
Working power
110V/220V 50/60Hz 30-75W
Operation system
Windows 7/XP/2000/Vista etc
Temperature
5-35o



Clothes Printer,Digital Clothes Printer,Printer Machine For Cloth,Mini Cloth Printing Machine

Shenzhen Refinecolor Technology Co., LTD. , https://www.szuvflatbedprinter.com