MAIN FEATURES:Â
2). Main spindle dynamic balanced, and supported at 2 points with taper roller bearings of Harbin
brand;
3). Outward appearance featuring large plains, making the machine more good-looking;Â
4). Gapped bedways, which are super-audio frequency hardened;Â
5). All gears hardened and ground by Reishauer grinding machine;Â
6). Leadscrew and feedrod interlocked, both with overload protection;
7). Automatic feed stopper;Â
8). Configuration variable totally according to orders:
Metric or inch system; right or left hand wheel; large plane type; halogen lamp; quick change tool past; DRO; T-slot compound; chuck guard; leadscrew hood; rapid traverse motor; electromagnetic brake; forced lubrication system.
Standard Accessories:
3-jaw chuck 250mm
Driving plate
Center & center sleeve
Wrenches
Oil gun
Operation manual
Optional Accessories:
Steady rest
Follower rest
4-jaw chuck 320mm
Face plate
Thread dial
Longitudinal automatic trip
Live center
Quick change toolpost
Taper copy ruler
4-position longitudinal automatic trip
Main Parameters:
MODEL Â |
CD6140B CD6240B |
CD6150B CD6250B |
CD6160B CD6260B |
||||
CAPACITIES | Max. swing over bed (mm) | 400(16″) | 500(20″) | 600(24″) | |||
Max. swing over cross slide(mm) | 225(9") | 325mm(13") | 360(14″) | ||||
Center distance (mm) | 1000\1500\2000 | ||||||
Center high (mm) | 250 | ||||||
Max swing in gap (mm) | 530(21″) | 630(25″) | 730(29″) | ||||
Valid length of gap | 260mm (10′/4″) | ||||||
Bed width | 330mm(13″) | ||||||
HEADSTOCK Â |
Spindle hole | 65mm(23/5″) | |||||
Spindle nose | ISO-C6 or ISO-D6 | ||||||
Spindle taper | Metric 70mm | ||||||
Spindle speeds (Number) | 22-1800rpm (15 steps) | ||||||
FEEDS | Metric threads range (Kinds) | 0.5-28mm (66kinds) | |||||
Inch Threads range (Kinds) | 1-56 tpi (66kinds) | ||||||
Module threads range (Kinds) | 0.5-3.5mm (33kinds) | ||||||
Diametral threads range (Kinds) | 8-56 tpi (33kins) | ||||||
Diametral threads range (Kinds) | 0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds) | ||||||
Cross feeds range (Kinds) | 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds) | ||||||
Rapid traveling speed of carriage | 5m/min (16.4ft/min) | ||||||
Leadscrew size: Diameter/Pitch | 35mm/6mm(1/4″) | ||||||
CARRIAGE | Cross slide travel | 300mm (13″) | |||||
Compound rest travel | 130mm(5″) | ||||||
Cross-section size of toolshank | 25*20mm/(1*6/8inch) | 25*25mm | |||||
TAILSTOCK | Taper of tailstock sleeve | Morse No.5 | |||||
Diameter of tailstock sleeve | 65mm(23/5″) | ||||||
Travel of tailstock sleeve | 120mm(43/4″) | ||||||
MOTOR | Main drive motor | 4.0kw or 5.5kw | 7.5kw | ||||
Coolant pump motor | 0.125kw | ||||||
Rapid traverse moter | 0.12kw | ||||||
PACKINGÂ SIZE (L*W*D) |
1000mm | 2420*1150*1800mm | |||||
1500mm | 2920*1150*1800mm | ||||||
2000mm | 3460*1150*1800mm |
 Model | CD6140C CD6240C |
CD6150C CD6250C |
CD6160C CD6260C |
|||||
CAPACTIES | Max. swing over bed mm | 400 | 500 | 600 | ||||
 | Max. swing over cross slide mm | 225 | 325 | 360 | ||||
 | Max. swing in gap mm | 530 | 630 | 730 | ||||
 | Center distance | 1000,1500, 2000mm | ||||||
 | Cross slide travel mm | 330mm | ||||||
SPINDLE | Spindle hole | 80mm | ||||||
 | Spindle nose | ISO-C8 or ISO-D8 | ||||||
 | Spindle taper | Metric 85mm | ||||||
 | Spindle speeds | 24-1600rpm (15 Steps) | ||||||
FEEDS | Metric threads range (Kinds) | 0.5-28mm (66Kinds) | ||||||
 | Inch threads range (Kinds) | 1-56tpi (66 Kinds) | ||||||
 | Module threads range (Kinds) | 0.5-3.5mm (33 Kinds) | ||||||
 | Diametral threads range (Kinds) | 8-56 DP (33 Kinds) | ||||||
 | Longitudinal feeds range(kinds) | 0.072-4.038mm/reV(0.0027-0.15inch/rev)(66kinds) | ||||||
 | Cross feeds range (kinds) | 0.036-2.019mm/reV(0.0013-0.075nch/rev)(66kinds) | ||||||
 | Rapid traveling speed of carriage | 5m/min(16.4ft/min) | ||||||
 | Leadscrew size:Diameter pitch | 35mm/6mm or 35mm | ||||||
CARRIAGE | Cross slide travel | 300mm | ||||||
 | Compound rest travel | 130mm | ||||||
 | Cross-section size of tool shank | 25x25mm | ||||||
TAILSTOCK | Spindle diameter | 65mm | ||||||
 | Spindle taper | Morse No. 5 | ||||||
 | Spindle travel | 120mm | ||||||
Main motor | Main drive motor | 4.0kw or 5.5kw | 7.5kw | |||||
 | Coolant pump motor | 0.125kw | ||||||
 | Rapid traverse motor | 0.12kw | ||||||
Net weight/Gross weight(kg) | 1000mm | 1640/2290 | 1700/2350 | 1800/2500 | ||||
 | 1500mm | 1850/2250 | 1910/2610 | 2010/2760 | ||||
 | 2000mm | 2090/2860 | 2150/2920 | 2250/3070 | ||||
PACKINGÂ SIZE (L*W*D) |
1000mm | 2420*1150*1800mm | ||||||
 | 1500mm | 2920*1150*1800mm | ||||||
 | 2000mm | 3460*1150*1800mm |
Our services:
1.Standardization of Service "212"
factory for installation and preoperation of machines.
 may send your technician to our company to learn how to operate machines.
MAIN FEATURES:Â
2). Main spindle dynamic balanced, and supported at 2 points with taper roller bearings of Harbin
brand;
3). Outward appearance featuring large plains, making the machine more good-looking;Â
4). Gapped bedways, which are super-audio frequency hardened;Â
5). All gears hardened and ground by Reishauer grinding machine;Â
6). Leadscrew and feedrod interlocked, both with overload protection;
7). Automatic feed stopper;Â
8). Configuration variable totally according to orders:
Metric or inch system; right or left hand wheel; large plane type; halogen lamp; quick change tool past; DRO; T-slot compound; chuck guard; leadscrew hood; rapid traverse motor; electromagnetic brake; forced lubrication system.
Standard Accessories:
3-jaw chuck 250mm
Driving plate
Center & center sleeve
Wrenches
Oil gun
Operation manual
Optional Accessories:
Steady rest
Follower rest
4-jaw chuck 320mm
Face plate
Thread dial
Longitudinal automatic trip
Live center
Quick change toolpost
Taper copy ruler
4-position longitudinal automatic trip
Main Parameters:
MODEL Â |
CD6140B CD6240B |
CD6150B CD6250B |
CD6160B CD6260B |
||||
CAPACITIES | Max. swing over bed (mm) | 400(16″) | 500(20″) | 600(24″) | |||
Max. swing over cross slide(mm) | 225(9") | 325mm(13") | 360(14″) | ||||
Center distance (mm) | 1000\1500\2000 | ||||||
Center high (mm) | 250 | ||||||
Max swing in gap (mm) | 530(21″) | 630(25″) | 730(29″) | ||||
Valid length of gap | 260mm (10′/4″) | ||||||
Bed width | 330mm(13″) | ||||||
HEADSTOCK Â |
Spindle hole | 65mm(23/5″) | |||||
Spindle nose | ISO-C6 or ISO-D6 | ||||||
Spindle taper | Metric 70mm | ||||||
Spindle speeds (Number) | 22-1800rpm (15 steps) | ||||||
FEEDS | Metric threads range (Kinds) | 0.5-28mm (66kinds) | |||||
Inch Threads range (Kinds) | 1-56 tpi (66kinds) | ||||||
Module threads range (Kinds) | 0.5-3.5mm (33kinds) | ||||||
Diametral threads range (Kinds) | 8-56 tpi (33kins) | ||||||
Diametral threads range (Kinds) | 0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds) | ||||||
Cross feeds range (Kinds) | 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds) | ||||||
Rapid traveling speed of carriage | 5m/min (16.4ft/min) | ||||||
Leadscrew size: Diameter/Pitch | 35mm/6mm(1/4″) | ||||||
CARRIAGE | Cross slide travel | 300mm (13″) | |||||
Compound rest travel | 130mm(5″) | ||||||
Cross-section size of toolshank | 25*20mm/(1*6/8inch) | 25*25mm | |||||
TAILSTOCK | Taper of tailstock sleeve | Morse No.5 | |||||
Diameter of tailstock sleeve | 65mm(23/5″) | ||||||
Travel of tailstock sleeve | 120mm(43/4″) | ||||||
MOTOR | Main drive motor | 4.0kw or 5.5kw | 7.5kw | ||||
Coolant pump motor | 0.125kw | ||||||
Rapid traverse moter | 0.12kw | ||||||
PACKINGÂ SIZE (L*W*D) |
1000mm | 2420*1150*1800mm | |||||
1500mm | 2920*1150*1800mm | ||||||
2000mm | 3460*1150*1800mm |
 Model | CD6140C CD6240C |
CD6150C CD6250C |
CD6160C CD6260C |
|||||
CAPACTIES | Max. swing over bed mm | 400 | 500 | 600 | ||||
 | Max. swing over cross slide mm | 225 | 325 | 360 | ||||
 | Max. swing in gap mm | 530 | 630 | 730 | ||||
 | Center distance | 1000,1500, 2000mm | ||||||
 | Cross slide travel mm | 330mm | ||||||
SPINDLE | Spindle hole | 80mm | ||||||
 | Spindle nose | ISO-C8 or ISO-D8 | ||||||
 | Spindle taper | Metric 85mm | ||||||
 | Spindle speeds | 24-1600rpm (15 Steps) | ||||||
FEEDS | Metric threads range (Kinds) | 0.5-28mm (66Kinds) | ||||||
 | Inch threads range (Kinds) | 1-56tpi (66 Kinds) | ||||||
 | Module threads range (Kinds) | 0.5-3.5mm (33 Kinds) | ||||||
 | Diametral threads range (Kinds) | 8-56 DP (33 Kinds) | ||||||
 | Longitudinal feeds range(kinds) | 0.072-4.038mm/reV(0.0027-0.15inch/rev)(66kinds) | ||||||
 | Cross feeds range (kinds) | 0.036-2.019mm/reV(0.0013-0.075nch/rev)(66kinds) | ||||||
 | Rapid traveling speed of carriage | 5m/min(16.4ft/min) | ||||||
 | Leadscrew size:Diameter pitch | 35mm/6mm or 35mm | ||||||
CARRIAGE | Cross slide travel | 300mm | ||||||
 | Compound rest travel | 130mm | ||||||
 | Cross-section size of tool shank | 25x25mm | ||||||
TAILSTOCK | Spindle diameter | 65mm | ||||||
 | Spindle taper | Morse No. 5 | ||||||
 | Spindle travel | 120mm | ||||||
Main motor | Main drive motor | 4.0kw or 5.5kw | 7.5kw | |||||
 | Coolant pump motor | 0.125kw | ||||||
 | Rapid traverse motor | 0.12kw | ||||||
Net weight/Gross weight(kg) | 1000mm | 1640/2290 | 1700/2350 | 1800/2500 | ||||
 | 1500mm | 1850/2250 | 1910/2610 | 2010/2760 | ||||
 | 2000mm | 2090/2860 | 2150/2920 | 2250/3070 | ||||
PACKINGÂ SIZE (L*W*D) |
1000mm | 2420*1150*1800mm | ||||||
 | 1500mm | 2920*1150*1800mm | ||||||
 | 2000mm | 3460*1150*1800mm |
Our services:
1.Standardization of Service "212"
factory for installation and preoperation of machines.
 may send your technician to our company to learn how to operate machines.
High Speed Wet Material Mixing Granulator
The high efficiency wet type mixing granulator used for wet granule preparation of tablets, capsules, granules, etc. It is widely used in such industries as medicine, food, chemical industry, etc.
Working principle:
Under the mixing action of the mixing paddle in the vessel, the powder materials are under the semi-flowing status and are mixed thoroughly. Then the bonds (Chinese patent medicine liquid extracts or other fluids) are injected to turn them into wet soft materials, which will be cut into even wet granules by the granule sizing paddle (granulating knife).
Features:
â—The machine adopts inverted taper granulating integral pot technology. The special mixing paddle and cutting knife structure ensures even finished products.
â—Mixing and granulating are completed in the closed pot to reduce dust pollution, conforming to GMP requirements.
â—With simple and safe operation, the mixing and granulating procedures are completed in one step.
â—It adopts human-machine interface PLC control, and the motor is subject to variable frequency speed adjustment. All process parameters can be stored automatically.
â—It is provided with the steam and water conversion function, so that cleaning is ensured.
Options:
â—Lifting machine feeding
â—Vacuum feeding
â—Material pot jacket design, used for heating and cooling
â—Equipped with wet type granule sizing machine or oscillating granulator
â—Bond liquid supply metering system
â—Data online printing system
â—WIP cleaning system
â—Explosion-proof function
High Speed Wet Material Mixing Granulator,Dry Material Mixing Granulator,High Speed Mixing Granulator,High Speed Dry Material Granulator
Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jiruimachine.com