Copper Granulator Machine for Sale Supplier

copper granulator machine Introduction:
JLF series copper granulator is used for recycling waste household communication cables, car cables,motor cables and other
industrial cables. The machine mainly includes crushing and separating,and it also has high efficiency dust collecting system to
get clearly copper pellet and plastic pellet. 



copper granulator machine Features:
JLF-400(capacity:200-250kg/h) copper granulator is suitable for middle size factory. It finishes the complete recycling process
in closed structure to avoid pollution and noise. Crushed copper wire go through the high pressure fan, and dust inside will be
cleaned and finally vibrating separator will take out clear copper and plastic pellet from different exit. 

copper granulator machine Advantages: 
1. Integrated structure, small dimensions, easy to move, saving space.
2. Low power consumption, stable performance. 
3. Minimum copper recycling rate can reach 99%.
4. No water is needed, no dust, no environmental pollution.

copper granulator machine Applications: 
Applicable wires: Waste communication copper cables, motor cable, car cable, industrial cable,household cable, enamelled cable.
If you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing.
TESTING IS FOR FREE! 


copper granulator machine Specifications: 
copper granulator machine Detail Instruction: 
1.Shredding System: Shredding is the first step of whole recycling process of the granulator machine.There is 14pieces of
moving blades inside the crusher, and it can cut small pieces of scrap copper wires to small pellet with size of 5-8mm(depends
on raw material size).
2.Separating system: The high pressure fan brings crushed copper and plastic pellet into the vibrating separator. There is
screen inside the system,which can take copper pellet and plastic pellet to different outlet).
3.Copper pellet outlet:Crushed and separated copper pellet get out of this exit.
4.Plastic pellet outlet: Crushed andseparated plastic pellet get out of this exit.
5.Dust Collector: There is combined dust collecting system on the recycling machine.
6.Electric control box: Normally we match automatic controlling system with the machine.And we could also accept control
system customization. 
 

copper granulator machine Related Machine: 
Main spare parts of copper wire recycling machine is screen and moving blades.Normally we supply extra one set sapre parts
includes 1 piece of screen and 12 pieces of blades for JLF-400 copper wire granulator. 
We also recommend proper related machines to customer according to the raw material to get best recycling effect. 
Pre-treat Machines: 
1. Cable stripper: if customer deal with large size copper wires with multi-strand,it is better to separate its cores and then put
them into granulator machine. 
2. Double shaft crusher: If the raw material is with large lenth, it will be helpful to cut them to smaller pieces before granulating. 
3. Blade sharping machine: After long time operating, blades on the granulator machine need maintiance to get good sharpness. 
4. Megnatic conveyor: If there is a small part iron mixing inside the copper wire, we can add a magnatic conveyors to take out
of the iron mixing of the copper pellet to get high purity. 
5. Belt conveyor: It is supplied to customer who required totally automatic copper wire feeding. 


copper granulator machine Packing&Shipping:
For JLF-400 copper wire separator , normally we pack it with plastic films and ply wooden case. 
Based on customers' requirement, we could also put packed JLF-400 into whole container. 



 FAQ 

1.Is there quick-wear part on the machine? 
 The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade
sharping machine to you for maintenance.
2.What's the longest continuous working time for the recycling machine? 
  Normally 10 hours per day. 
3.Is the machine easy to operate? How many workers required to operate it? 
  We design precise but simple control system for the machine. 
   For single recycling machine, only one worker is required. 
   For complete recycling line, two workers are required. 

Contact information:  
Attn: Tina 
Mobile:+8615981925357
 
 
 
copper granulator machine Introduction:
JLF series copper granulator is used for recycling waste household communication cables, car cables,motor cables and other
industrial cables. The machine mainly includes crushing and separating,and it also has high efficiency dust collecting system to
get clearly copper pellet and plastic pellet. 



copper granulator machine Features:
JLF-400(capacity:200-250kg/h) copper granulator is suitable for middle size factory. It finishes the complete recycling process
in closed structure to avoid pollution and noise. Crushed copper wire go through the high pressure fan, and dust inside will be
cleaned and finally vibrating separator will take out clear copper and plastic pellet from different exit. 

copper granulator machine Advantages: 
1. Integrated structure, small dimensions, easy to move, saving space.
2. Low power consumption, stable performance. 
3. Minimum copper recycling rate can reach 99%.
4. No water is needed, no dust, no environmental pollution.

copper granulator machine Applications: 
Applicable wires: Waste communication copper cables, motor cable, car cable, industrial cable,household cable, enamelled cable.
If you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing.
TESTING IS FOR FREE! 


copper granulator machine Specifications: 
copper granulator machine Detail Instruction: 
1.Shredding System: Shredding is the first step of whole recycling process of the granulator machine.There is 14pieces of
moving blades inside the crusher, and it can cut small pieces of scrap copper wires to small pellet with size of 5-8mm(depends
on raw material size).
2.Separating system: The high pressure fan brings crushed copper and plastic pellet into the vibrating separator. There is
screen inside the system,which can take copper pellet and plastic pellet to different outlet).
3.Copper pellet outlet:Crushed and separated copper pellet get out of this exit.
4.Plastic pellet outlet: Crushed andseparated plastic pellet get out of this exit.
5.Dust Collector: There is combined dust collecting system on the recycling machine.
6.Electric control box: Normally we match automatic controlling system with the machine.And we could also accept control
system customization. 
 

copper granulator machine Related Machine: 
Main spare parts of copper wire recycling machine is screen and moving blades.Normally we supply extra one set sapre parts
includes 1 piece of screen and 12 pieces of blades for JLF-400 copper wire granulator. 
We also recommend proper related machines to customer according to the raw material to get best recycling effect. 
Pre-treat Machines: 
1. Cable stripper: if customer deal with large size copper wires with multi-strand,it is better to separate its cores and then put
them into granulator machine. 
2. Double shaft crusher: If the raw material is with large lenth, it will be helpful to cut them to smaller pieces before granulating. 
3. Blade sharping machine: After long time operating, blades on the granulator machine need maintiance to get good sharpness. 
4. Megnatic conveyor: If there is a small part iron mixing inside the copper wire, we can add a magnatic conveyors to take out
of the iron mixing of the copper pellet to get high purity. 
5. Belt conveyor: It is supplied to customer who required totally automatic copper wire feeding. 


copper granulator machine Packing&Shipping:
For JLF-400 copper wire separator , normally we pack it with plastic films and ply wooden case. 
Based on customers' requirement, we could also put packed JLF-400 into whole container. 



 FAQ 

1.Is there quick-wear part on the machine? 
 The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade
sharping machine to you for maintenance.
2.What's the longest continuous working time for the recycling machine? 
  Normally 10 hours per day. 
3.Is the machine easy to operate? How many workers required to operate it? 
  We design precise but simple control system for the machine. 
   For single recycling machine, only one worker is required. 
   For complete recycling line, two workers are required. 

Contact information:  
Attn: Tina 
Mobile:+8615981925357
 
 
 

Internal Automatic Polishing Machine

Disc Polishing Machine,Automated Polishing Machine,Aluminium Polishing Machine,Stainless Steel Sheet Polishing Machine

Foshan Youngmax Machine Co.LTD , https://www.ymaxmachine.com