Uninterruptible Power Supply (UPS) batteries are typically used for 3 to 5 years. Life expectancy depends on several factors, including usage (the number of times the device must be in battery-powered mode) and other environmental factors. Here are some guidelines for ensuring that your equipment achieves the best expected life:
1. Be sure to place your APC UPS in a cool, dry, well-ventilated location. Ideally, the temperature at which the UPS is placed should be no higher than 24 degrees Celsius. At the same time, for ventilation purposes, leave approximately 1 to 2 inches of space on each side for air circulation.
2. Perform 1 or 2 UPS runtime calibrations only once a year if necessary. Sometimes you can perform runtime calibration to verify that your run time is sufficient. However, frequent execution of runtime calibration reduces the life expectancy of APC batteries.
3. Do not store the APC battery for an extended period of time. The new battery can be stored for 6-12 months. After this time, you should use the battery as soon as possible, otherwise you will lose a lot of power stored. It is not recommended to store used batteries.
4. Do not exceed 80% of the rated capacity of the UPS equipment as this will result in reduced runtime. As the load increases, the runtime will decrease accordingly. If the power supply is not available, the full-load UPS will quickly drain and release its battery, which will reduce the battery life expectancy. Note: To ensure longer battery life, do not connect the laser printer to the UPS's spare battery outlet. Make sure the laser printer uses a “surge only†outlet (use the appropriate model). For UPSs that do not have a “surge only†outlet, it is recommended to connect the laser printer to a separate APC surge suppressor.
TX1D1H
CNC Plasma Cutting Machine for plates cutting, mainly used for the cutting steel plates of steel structure, bridge, petrol platform industry and so on.
- Hyperthern 75A 100A 125A 200A power supply
- Effective cutting width and length as buyer request
- plasma cutting and flame cutting
-200m cutting torch lifting distance
-0-9000mm/min
-0.05 speed tolerance
TX-XY Series CNC Plasma cutting machine for round and square pipes
Used for the cutting pipes of steel structure, bridge, petrol platform industry and so on
-round pipes from 100mm-1500mm
-square pipes from 100mm-1500mm
-12m pipes length
-one plasma and one flame cutting
Applicable Industry:
1. metal sheet cutting for signs and advertising
2. Automobile and ship manufacturing
3. Construction machinery manufacturing
4. Sheet metal processing
Main Features
1. Special R&D heavy-dutysteel lathe structure for big size steel processing, strict vibration aging treatment, effective removal of welding residual stress, the lathe can work ten years without deformation
2. Advancedspecial CNC plasma control system, with parameters presetting, memory, LCD display, automatic arc starting and stopping functions , stable performance
3. Gantrytype structure with special light crossbeams design, good rigidity , small inertia.
4. Unique slope leakage table design, easy to collectthe finished workpiece and broken materials, safe and convenient
5. High-precision linear guide rail, with high-speed rackgear transmission, to ensure long-term stable running.
6. High compatibility with CAD/CAM software such as Type3, ArtCam, AutoCAD, Ucancam, Jdpaint etc
7. Highsensitivity Auto arc voltage height control system, automatically adjust the best cutting distance, to ensure the high precision cutting (optional)
Plasma Cutting Machine
Plasma Cutting Machine,Cnc Plasma Cutting Machine,Plasma Machine,Cnc Cutting Machine
Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com