Hf-44t Well Received Diamond Concrete Coring Machine

HF-44T Well Received Diamond Concrete Coring Machine

HF-44 Core Drilling rig, a new type of product with enhanced capacity, is a kind of hydraulic-driven, spindle, diamond-bit, small-diameter core drill with fairly powerful drilling force. It is mainly suitable for exploration of metal or non-metal solid mineral ore bed. It is widely applied in core drill with diamond bit or hard tungsten-carbide-tipped bit and diamond bit in the field of geology, metallurgy, coal mine, hydrological and engineering drilling. It can also be used in the fields of superficial-zone.


Petroleum and natural gas mining, mine workings ventilation and water discharge tunnel drilling as well as foundation pile construction in large diameter. It is in reasonable structure, light weight, powerful capacity, multiuse, steady performance, high responsibility and high standardization and generalization.

II. Main Features of HF-44A core drilling rig

1. There are more speed grade (8 grades), reasonable speed range and high torque while low speed. Max. Torque is up to 3200 N. M (2358 lbf. Ft). The drill is adapted on core drilling with tungalloy-carbid-tipped and diamond oil as well as engineering geology exploration, hydrology well drilling and basic pile engineering.

2. with large spindle I. D. 93mm(3.66 inch), the drill is fed with double hydraulic cylinders with much longer stroke up to 600mm(23.62 inch). with strong technological adaptability, the rig can be adapted on many field, especially on large diameter drill rod drilling, (upper part coring) extracting core with wire line. Thus it is more effective in improving drilling efficiency with less faulty in hole.

3. with powerful drilling capacity, the rated drilling depth comes up to 1, 000m(39.37 inch) with 71mm(2.80inch) wire-line coring drill rod.

4. Light in weight, and in fine dismountability, the rig can be dismantled into ten parts easily, the biggest apparatus is in 300 kg (661.5 lb). The whole drill is in 2150kg(4741 lb), it can be moved easily especially in mountain area.

5. Clamped with belleville spring and loosened with hydraulic cylinder, the hydraulic chuck is adopted with three-jaws self centering. It is in strong and steady clamping force.

6. Equipped with a water brake for steady and smooth deep hole drilling.

7. Supplying oil with a simplex gear pump, it is easy for installation and operation; Lower in energy consumption and in low oil temperature of hydraulic system; The rig is for sure in steady drilling. The hand-operated oil pump can be put in use to hoist the drilling tools in hole upon the power engine failing to operate.

8. with compact structure and reasonable layout, with all components exposed, and with non overlapped ones, it is convenient for maintenance.

9. with low center of gravity and long travelling distance up to 460mm(18.1 inch), the rig is reliable and stable in high speed drilling.

10. It is easy to get to know the conditions in hole with an antivibration meter. Less in operating handles, the rig can be operated credibly and flexibly.
 

Production ability

We have more than 50 sets of processing equipment to ensure the quality of our product, which has proved worthy by our client's recognition. And these equipments ensure large production capacity and adequate stock.
We have all the small models in stock all year long and the bigger ones ready within 15-30 days.

Customers visit our factory

With all the effort put in, we have successfully marketed our products to almost every corner of the world. Here are the pictures of our clients' visits and our clients' on-the-site operation.

About the product Packing

To protect drilling rigs during sea transportation, we give them proper packing.
HF130, HF80, HF150E, HF150, HF200, HF30: Wooden case
HF-3, HF-4, HFDX-6. HF-8, HFT200, HFT350B: Plastic woven bag
Spare parts: Wooden case or plastic woven bag
HFT-200, HFT-3: Nude, main machine in plastic woven bag.


Quality guarantee

Our products has been authorized and certified by TUV and ISO9001: 2008. We guarantee the quality of the machines for one year after the trial run (excluding the wearing parts), but not exceeding 15 months from the date on which machines leave the factory

 
Our Services

Sales manager:Vincent Guo
Office tel:+0086-371-55019599
After sales: +0086-371-67990387
Accessories:+0086-371-55019184
 
Hanfa Website:www.hanfagroup.com
  HF-44T Well Received Diamond Concrete Coring Machine

HF-44 Core Drilling rig, a new type of product with enhanced capacity, is a kind of hydraulic-driven, spindle, diamond-bit, small-diameter core drill with fairly powerful drilling force. It is mainly suitable for exploration of metal or non-metal solid mineral ore bed. It is widely applied in core drill with diamond bit or hard tungsten-carbide-tipped bit and diamond bit in the field of geology, metallurgy, coal mine, hydrological and engineering drilling. It can also be used in the fields of superficial-zone.


Petroleum and natural gas mining, mine workings ventilation and water discharge tunnel drilling as well as foundation pile construction in large diameter. It is in reasonable structure, light weight, powerful capacity, multiuse, steady performance, high responsibility and high standardization and generalization.

II. Main Features of HF-44A core drilling rig

1. There are more speed grade (8 grades), reasonable speed range and high torque while low speed. Max. Torque is up to 3200 N. M (2358 lbf. Ft). The drill is adapted on core drilling with tungalloy-carbid-tipped and diamond oil as well as engineering geology exploration, hydrology well drilling and basic pile engineering.

2. with large spindle I. D. 93mm(3.66 inch), the drill is fed with double hydraulic cylinders with much longer stroke up to 600mm(23.62 inch). with strong technological adaptability, the rig can be adapted on many field, especially on large diameter drill rod drilling, (upper part coring) extracting core with wire line. Thus it is more effective in improving drilling efficiency with less faulty in hole.

3. with powerful drilling capacity, the rated drilling depth comes up to 1, 000m(39.37 inch) with 71mm(2.80inch) wire-line coring drill rod.

4. Light in weight, and in fine dismountability, the rig can be dismantled into ten parts easily, the biggest apparatus is in 300 kg (661.5 lb). The whole drill is in 2150kg(4741 lb), it can be moved easily especially in mountain area.

5. Clamped with belleville spring and loosened with hydraulic cylinder, the hydraulic chuck is adopted with three-jaws self centering. It is in strong and steady clamping force.

6. Equipped with a water brake for steady and smooth deep hole drilling.

7. Supplying oil with a simplex gear pump, it is easy for installation and operation; Lower in energy consumption and in low oil temperature of hydraulic system; The rig is for sure in steady drilling. The hand-operated oil pump can be put in use to hoist the drilling tools in hole upon the power engine failing to operate.

8. with compact structure and reasonable layout, with all components exposed, and with non overlapped ones, it is convenient for maintenance.

9. with low center of gravity and long travelling distance up to 460mm(18.1 inch), the rig is reliable and stable in high speed drilling.

10. It is easy to get to know the conditions in hole with an antivibration meter. Less in operating handles, the rig can be operated credibly and flexibly.
 

Production ability

We have more than 50 sets of processing equipment to ensure the quality of our product, which has proved worthy by our client's recognition. And these equipments ensure large production capacity and adequate stock.
We have all the small models in stock all year long and the bigger ones ready within 15-30 days.

Customers visit our factory

With all the effort put in, we have successfully marketed our products to almost every corner of the world. Here are the pictures of our clients' visits and our clients' on-the-site operation.

About the product Packing

To protect drilling rigs during sea transportation, we give them proper packing.
HF130, HF80, HF150E, HF150, HF200, HF30: Wooden case
HF-3, HF-4, HFDX-6. HF-8, HFT200, HFT350B: Plastic woven bag
Spare parts: Wooden case or plastic woven bag
HFT-200, HFT-3: Nude, main machine in plastic woven bag.


Quality guarantee

Our products has been authorized and certified by TUV and ISO9001: 2008. We guarantee the quality of the machines for one year after the trial run (excluding the wearing parts), but not exceeding 15 months from the date on which machines leave the factory

 
Our Services

Sales manager:Vincent Guo
Office tel:+0086-371-55019599
After sales: +0086-371-67990387
Accessories:+0086-371-55019184
 
Hanfa Website:www.hanfagroup.com
 

Steel Coil

Here you can find the related products in Steel Coil, we are professional manufacturer of Carbon Steel Coil, include Hot Rolled Coil, and Cold Rolled Steel Coil. We focused on international export product development, production and sales. We have improved quality control processes of Metal Coil and Carbon Steel Coil to ensure each export qualified product.
If you want to know more about the products in Metal Coil, please click the product details to view parameters, models, pictures, prices and other information about our products. Our products also involve GI and PPGI.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Steel Coil!

Steel Coil,Hot Rolled Coil,Carbon Steel Coil,Metal Coil,Cold Rolled Steel Coil

Shandong Longhao Steel Group Co., Ltd. , https://www.longhaosteelgr.com